ALGER ABELLA SALON

REGISTERED MASTER ELECTRICIAN Email: adavry@r.postjobfree.com Contact #: +974-********

POSITION APPLIED: Industrial Electrician/Electrical Technician

objective: To develop a career that embodies professionalism and excellence with advancement.

To contribute and enhance my knowledge in the field of electrical expertise.

PERSONAL DATA

Birth place : Liong Guinsiliban Camiguin Province Philippines Birth date : October 6, 1990 Age : 29 years old Gender : Male Civil status : Married Citizenship : Filipino Religion : Roman Catholic Height : 5’5

PROFESSIONAL SUMMARY

Over 8 years exceptional and long experience working for electrical works in different company, such as National Grid Corporation of the Philippines (NGCP), Camiguin Electric Cooperative (CAMELCO), Gaisano Grand Fiesta Mall (GGFM), Total Power Box Solution Inc., Assol Albenaa Trading and Contracting Company, Cebu South General Hospital and Mosanada FMS (Facilities Management Services).

Compliance of National and International Electrical Standard Code specification.

Read and interpret electrical schematic diagrams and drawings and follow standard code specification.

High knowledge of electrical works for switchgear panel board controls such as, motor controllers also known as Stop/start or D.O.L, forward/reverse and wye delta connection, Lighting controls, (ATS) automatic transfer switch, (ATS) synchronize panel, automatic capacitor bank, meter center, medium and high voltage switchgear controls 13.8 kv to 36 kv.

Committed to comply with the regulation and company policy procedures.

Follow all the safety rules and regulation inside the company worksite at all times.

ACHIEVEMENTS

REGISTERED MASTER ELECTRICIAN September 6, 2019

Doha Qatar

TESDA NC II – BUILDING WIRING INSTALLATION Oct. 2009 – Dec. 2009

Training Certification (Philippines)

Camiguin Polytechnic State College

TRAININGS/SEMINARS ATTENDED

IIEE-SQC 14th Annual Conference & Technical Seminar October 11, 2019

City Center Rotana Hotel, Doha Qatar

Salient points of RA 11285: The energy efficiency and conservation act of 2019

Project Design Management

Testing, Commissioning & Maintenance of Transformers

Basic of Instrumentation

EDUCATION

College

Camiguin Polytechnic State College

Bachelor of Technology – Major in Electrical June 2007 – April 2011

Secondary

Guinsiliban National High School June 2003 – April 2007

Primary

Liong Elementary School June 1997 – April 2003

PROFESSIONAL EXPERIENCE

Electrical Technician March 29, 2017 – Present

Mosanada FMS (Facilities Management Services)

P.O Box 24039 Doha Qatar

Conduct corrective maintenance, repair and troubleshooting all defective electrical equipment, power and lighting circuits, ensure all internal and external lightings on site are properly operational to avoid complaint from the client and follow electrical standard code specification.

Conduct monthly ppm schedules of all electrical switchgear controls, panel boards, earthing and bonding and all lightning arresters, yearly shutdown and re-tightening schedules of all electrical service equipment terminals and busbars.

Attend and supervise all ppm and cm task of mechanical, hvac and electrical works with contractors.

Attend and supervise of all ppm and cm works of elevators and escalators with the contractors on site.

Monitoring of 7 sets 2300 tons chillers, 7 cooling towers, 7 primary and 7 secondary pumps, fire pumps, domestic pumps, submersible pumps and irrigation pumps.

Building Management System (BMS) operator reliever, monitoring of all cooling towers, chillers, pumps, domestic and irrigation tanks and fire alarm system.

Conduct ppm and testing of fire alarm control panels and weekly testing of fire pumps with the contractors on site.

Conduct daily walk through inspection on site and check all defective electrical, mechanical, hvac and civil works and raise a task at our helpdesk officer to process on the CAFM (Computer Aided Facilities Management) system and forward the task to the respective contractors to be done with a time duration.

Take over the 24 hours rotational shifting schedules, such as morning shift, afternoon shift and evening shift, check the incidents during the shift we take over and make a follow up action and submit a daily report to the respective shift engineers.

Conduct weekly ppm and run test of standby power generators with the contractors to ensure proper condition and always ready for the emergency power interruption.

Attend all requested assistance from events on site asking for electrical power supply and immediately provide and arrange their power supply needs.

Take over all the electrical, mechanical hvac and civil works complaints from the clients that was receive from our helpdesk officer and made an immediate response to avoid complaints from clients.

Supervise all the respective contractors and obliged to be a good example as a person leading on the worksite.

Follow all the safety policy and procedures at all times.

Electrical Technician Maintenance July 14, 2016 – December 20, 2016 Cebu South General Hospital Tuyan Naga City Cebu (Philippines)

Repair and troubleshooting all defective electrical equipment, lightings, power sockets, etc.

Preventive maintenance of all electrical service equipment, grounding and bonding, switchgear controls and motor controls.

Conduct corrective maintenance of all electrical defects found during a daily rounds in the premises.

Preventive maintenance and run test of standby power generator to ensure a good condition for emergency power interruption.

Preventive maintenance of the water treatment system for dialysis, to maintain a proper and exact softness of the water.

Preventive maintenance of fire alarm control system and always prepare/reserve a medical oxygen needed by the hospital.

Conduct preventive maintenance of all submersible, domestic and fire pumps and weekly testing of fire pumps.

Power tender at the control room, monitoring of all electrical service equipment in the hospital and be ready to make an immediate response for the emergency power interruption.

Follow all the safety procedures at all times in the hospital.

Industrial Electrician/Technician Dec. 18, 2013 – March 30, 2016 Assol AlBenaa Trading and Contracting Company P.O.BOX 2698 Khamis Mushayt 61961, (KSA) 011************/ Fax: 011************

Read and interpret electrical, mechanical schematic diagrams and drawings.

Wiring installation of panel board controls such as D.O.L and Wye Delta, cable layout for power supply of submersible pumps and water pump motors.

Wiring installation, cable termination in panel boards, Cable pulling, cable cad welding, grounding and bonding installation, pipe and cable layout, installation and setting of switchgear panel board controls, installation of lighting fixtures, power sockets, installation of lightning arresters, testing and commissioning with engineers and follow electrical standard code specification.

Troubleshooting lighting poste, check and repair defective electrical service equipment in the waste water plant pumping station.

Preventive maintenance for all electrical service equipment, termination of power cable for (MCC) motor controls, switchgear to electrical distribution panel boards, setting of MVSG, LVSG and MCC electrical service equipment.

Ensure everyone on a team understands and comply on the job procedures on the stated permit of work.

Preventive electrical and mechanical maintenance in some government waste water plant pumping station in Asser region, Kingdom of Saudi Arabia.

Follow all the safety procedures in all electrical and mechanical works.

Industrial Electrician/Technician January 11, 2013 – August 18, 2013

Total Power box Solution Inc.

Cavite Light Industrial Park, Brgy. Maguyam, Silang, Cavite Manila (Philippines)

TELS: (02)404-0266/(046-***-****

Wiring installation of (ATS) automatic transfer switch controls, automatic capacitor bank, meter center, (MCC) motor controllers, VFD and Soft starter Drive, medium and high voltage switchgear controls 13.8 kv/36 kv.

Conduct servicing and installation of busway/busduct on different commercial building all over Philippines.

Follow of all the job order numbers and check all the kind of materials which has the correct voltage and amperage that you have to mount and install wirings in the panel board switchgear controls.

Assembled of electrical busway/busduct and check all the materials to be assembled.

Conduct electrical servicing like testing/commissioning, troubleshooting, termination and wiring installation of electrical switchgear controls in client’s commercial buildings such as hotels, malls, condominium and other small or high rise building in the Philippines.

Maintenance Electrician May 21, 2011 – December 30, 2012

Gaisano Grand Fiesta Mall (GGFM)

Highway, Tabunok, Talisay City Cebu (Philippines)

Conduct daily rounds and do CM works like troubleshooting faulty lighting and power circuits, repair defective electrical equipment and installation of additional electrical wirings in the building and also in the air conditioning unit.

Weekly preventive maintenance of all cooling tower generation system and motor controls for the cooling system of the centralized air conditioning unit.

Weekly preventive maintenance and run test of standby power generator in preparation for the emergency power interruption in the mall.

Conduct weekly ppm and testing of fire pumps and domestic pumps.

Conduct monthly ppm of all electrical service equipment in the mall.

Take over night shift monitoring of all service equipment operation in the power house.

Installation and maintenance of electrical controls for submersible pump motor.

Ensure good housekeeping of the power house control room and follow all the safety policy and procedures of the company.

On-the job Training as a lineman November 2010 – February 2011

Camiguin Electric Cooperative (CAMELCO)

Pandan, Mambajao Camiguin Province

TEL: (088-***-**-**

Monitoring all electrical current line reading in the control room substation and calibrating electrical meter.

Preventive maintenance, clearing of trees under the transmission line.

Conduct rehabilitation of damage cross arm, transformer, and wood pole in the transmission line.

Conduct installation of residential meter and install building lightings for the needs of consumer.

On-the job Training as a lineman November 2008 – February 2009

National Grid Corporation of the Philippines (NGCP)

District 3 – North Central Mindanao Area

Carmen, Cagayan De Oro City

Monitoring all electrical current reading for the primary line power supply 35.5 kv, 69 kv and 138 kv line in the control room substation.

Conduct rehabilitation of damage cross arm, transformer, wood pole 35.5 kv and 69 kv line, and line tower bracing in the transmission line 138 kv.

Preventive maintenance clearing of trees under the transmission line.

Installation of steel pole for the new transmission line.

CHARACTER REFFERENCE

Engr. Rudilyn Reyes Qatar Civil Aviation Authority

Professional Electrical Engineer Doha Qatar

Engr. Christopher Pino Qatar Aluminum (Qatalum)

Professional Electrical Engineer Doha Qatar

Engr. Edwin Orgasan Mosanada FMS

Mechanical Engineer Doha Qatar

Contact this candidate