RONIE GUTIEREZ AQUINO

Magnolia St. Phase * Menlo Village Talisay City Negros Occidental, Philippines

Qatar #:+974-********

Tel #: (0063-034) 712-0055

Email Add: adasr4@r.postjobfree.com

adasr4@r.postjobfree.com

adasr4@r.postjobfree.com

POSITION APPLIED: INSTRUMENTATION SUPERVISOR

EMPLOYMENT HIGHLIGHT SUMMARY

Al JABER ENGINEERING L.L.C.

P.O. Box: 22801, Doha – Qatar

Tel: +974-****-****

Fax: +974-****-****

Email: adasr4@r.postjobfree.com

Al Jaber Engineering (JEC) is a leading general contractor based in the State of Qatar. Established in 1995 as part of Al Jaber Group - a major conglomerate with over 30 companies- JE has successfully completed numerous large-scale turnkey projects for many prestigious clients in different sectors including: Highways, Roads and Infrastructure Engineering, Procurement, Installation & Commissioning (EPIC) Oil, Gas, Petrochemical and Industrial Pipeline Construction Power Generation, Substations & Desalination Plants, Sewage Treatment Plants and Pumping Stations, Maintenance of Oil & Gas and Petrochemical Installations Landmark Buildings.

Client Project:

March 09, 2018 to Present

LUSAIL MARINA-LRT, Qatar (M-379)

(Marina 03, 04 &QEC01)

Al Jaber Engineering – Sub-Con-(QDVC/ALSTOM)

Doha, Qatar

Commissioning Instrument & Electrical Supervisor

Job Description:

Responsible for daily testing and commissioning activity with the project requirements, testing sheet prior for the activity to start. Analyzed situation in term of safety procedure in which HSE department is required. Engaged in various commissioning and testing activities but not limited to; Pre-commissioning and commissioning of;

MCC (Motor Control Center) & SMDB’s (Sub-Main Distribution Board) – Cable size, insulation resistance test, load, current transformer, line phasing, tightness and field coordinate/tags verification.

Pump (dewatering, foul & fire pump) – Operation configuration as philosophy required to be finalized. Field sensors like float switches, hydrostatic pressure transmitter are in place and working as configured. Cable size, insulation resistance test, load, current transformer, line phasing, tightness and field coordinate/tags verification.

Fans (Exhaust, Emergency, ground fans) – Rotation should be in correct direction and volume flow should be in accordance as required capacity. Cable size, insulation resistance test, load, line phasing, tightness and field coordinate/tags verification.

Lifts & AHU (Air Handling Unit), UPS, CBS (Central Battery System)– Provide enough power supply to handle the system operation. Cable size, insulation resistance test, load, line phasing, tightness and field coordinate/tags verification.

FCU (Fan Control Unit) – Integrate local control panel as standalone and remote operation of the system. Return temperature and actuator in PID (proportional Integral Derivative) operation. Pressure differential switch as alarm for the presence of air in the line.

Fire alarm – Integration of field sensor and associated equipment’s like; CRAC (computer room air conditioning) unit, MSFD (motorize smoke and fire damper), FCU (FA to local panel, system actual response test during fire scenario.

Fire pump System – Energized/commissioned with the vendor. Ensure the functionality and associated field sensors should be in correct response. Correct parameters reading as the system start to operate.

Responsible from installation, cable glanding and termination to commissioning stage of the following panels; LV-PDB(Low Voltage Power Distribution Board), E-PDB (Emergency Power Distribution Board), SMDB (Sub-Main Distribution Board), ESMDB (Emergency Sub-Main Distribution Board), DB-L, P, TUN, CBS &UPS (Distribution Board for Lights, Power, Tunnel, Central Battery System & Uninterrupted Power System), EDB-L, P TUN, CBS &UPS (Emergency Distribution Board for Lights, Power Tunnel, Central Battery System & Uninterrupted Power System), MCC-AHU (Motor Control Center for Air Handling unit), MCC-AC (Motor Control Center for Air Conditioning) and Lighting Control Panel.

Troubleshoot; recommend appropriate way on how to solve the issue on site. Coordinate liaised activities relative to pre-commissioning and commissioning activities. Ensure that construction inspection is completed prior to commissioning activity. Ensure that final testing and commissioning works such as, RCD (Residual Current Devices) test, Loop Impedance test, Insulation test, and continuity tests are carried out in safe and controlled manner. Ensure that planning, coordination; execution and follow up of all pre-commissioning activities are done in strict compliance with the specifications. Liaise with Construction and Commissioning teams. Prepare progress reports on all commissioning activities.

Associated compulsory training attended as project required; APAVE - Preparation for the Authorization of Electricians, Temporary Operation Training for energized rooms, CPW (Competent person to work), TPS (Traction Power Sub-Station).

Client Project:

August 15, 2015 to March 09, 2018

KHARAMAA, Qatar (M347)

Al Jaber Engineering - Main Contractor

Upgrading Reservoir Pumping Station

Doha, Qatar

Commissioning Instrument Supervisor

Job Description:

Responsible for daily testing and commissioning activity commencing associated with the project requirements, in term of documentation prior for the activity to start. Analyze situation in term of safety procedure in which HSE department is required. Engaged in various commissioning and testing activities but not limited to; Pre-commissioning and commissioning of Field Instruments such as; Magnetic flow meter (E&H), Pressure transmitter (SEIMENS), Ultrasonic level transmitter (SEIMENS), Electric actuated valve (AUMA), various of solenoid, analyzing system – E&H (Turbidity, ORP, PH, Chlorine and related sensor for analysis) and PLC associated with the SCADA.

Associated system commissioned: water reservoir, irrigation, main pumps, video wall, temperature and vibration monitoring, MCC, ECP (Emergency Control Panel), sump pump, fire alarm, standby generator, surge vessel, compressor and NWCC System.

Responsible for all pre-commissioning and commissioning activity in term of preparation and execution of the test. Ensure that planning, coordination; execution and follow up of all pre-commissioning activities are done in strict compliance with the specifications. Liaise with Construction and Commissioning teams. Prepare progress reports on all commissioning activities.

Also, responsible for documentation closure such as snags list, drawing red mark-up, submission of final approved submittal and instrument equipment manual.

Client Project:

Jan 24, 2013 to August 15, 2015

ASHGHAL, Qatar (M337)

Al Jaber Engineering - Main Contractor

Refurbishment and Upgrading Works for Various Pumping Station-PH8

Doha, Qatar

Commissioning Instrument Supervisor

Job Description:

Response to consultant comments with regards to documents approval, generating necessary document details in term of drawing, test procedure and proper execution during commissioning activity.

Site documents/drawing preparation in term of red marking as per actual condition, Client requirement and operation wise of specified equipment prior for submittal to Client/Consultant for final approval (Loop check sheet, Insulation Form, PLC wiring diagram and Instrument Loop Diagram). Equipment synchronizing in its control system to Programmable Control System (PLC) for proper control and command operation. Provide necessary action/modification of site equipment wiring, as consultant required for logic operation.

Responsible for document preparation of the following activity; Method Statement for Calibration, Calibration Procedure, Method Statement for Loop Testing, and Commissioning Procedure.

Engaged in various commissioning and testing activities such as; Bench and field Calibration of field instrument, loop testing of instrument, energized/commissioning motor utility pumps, high pressure pumps, sump pumps, transfer pumps, Diesel generator, MCC (Motor Control Cabinet), Distribution Board, Motor Control Panel, UPS System, Transformers and Intercom with associated field instrument in the loop. Pre-commissioning and commissioning of Field Instruments such as; Magnetic flow meter (E&H), Pressure transmitter (E&H), Pressure differential transmitter (E&H), Ultrasonic level transmitter (E&H), Electric actuated valve (AUMA), proximity switch, vibration sensor, float level switches (E&H),, various of solenoid and PLC associated with the SCADA.

Associated system commissioned: Wet well, Irrigation, Main pumps, Mechanical Screen, Odour Control Unit (OCU), MCC, Sump pump, Fire alarm, Main generator, PLA & SCADA, potable water pump and penstock.

MOHAMMAD AL-MOJIL GROUP

P.O. Box 31411, Kingdom of Saudi Arabia

MMG core business purely involved in Engineering, Procurement and construction projects mainly in the oil and gas, refineries and petrochemical industries. Furthermore, involve in Offshore Construction Project which has five basic units including civil, structural, mechanical, and electrical and instrumentation as well as maintenance and turnaround work units. It was the first Saudi company to offer a fully serviced fleet of vessels with dedicated equipment and highly skilled manpower to service Saudi Aramco, Qatar petroleum, SAIPEM, Barwill, National Petroleum Construction Company, J Ray McDermott, Global RUSHAID, McDowell, Schlumburger, Saudi Samsung, Worley Parson, DAELIM, Foster Wheeler and Japan Gas Corporation.

Client Project:

June 15, 2011 Nov. 30, 2012

Saudi Arabian Oil Company (Saudi Aramco)

Snamprogetti Ltd. (A company of Saipem) - Main Contractor

Manifa Core Hydrocarbon Facilities Project

Manifa, Saudi Arabia

Instrument Lead Technician

Job Description:

Knowledge to performed, plant pre-commissioning, commissioning/start-up-instrumentation-process control system(PCS), bench and field calibration/test of different type of instrument/devices namely pressure, level, temperature, flow transmitter; control, solenoid, reliefs, on-off, and pneumatic valves with the project management team and Saudi Aramco proponent as witness. Also different types of valves such as pressure, level, temperature and flow Control valve, Isolation (solenoid) valve, on/off valve, pneumatic valve and motor operated valves utilizing 24vDC. Review, Preparation, As built (redlined mark) of piping and instrument drawing (P&ID), instrument specification sheet (ISS) and calibration certificate of the standard device prior to conduct calibration test and includes loop folder attachment document such as instrument installation sheet, loop check form, punch list form, calibration test report, control valve pneumatic hook up, cable insulation resistance test, impulse line test report, segment test form, instrument loop diagram (ILD) and piping and instrument drawing (P&ID) prior for instrument/device final test. Conduct individual cold loop and open loop test in Programmable Logic Control (PLCTRICONEX-1311 application), utilizing Vibration Monitoring System (VMS), Compressor Control System (CCS), and Burner Management System (BMS).

Hands-on comprehensive experienced in troubleshooting/functional test with all the process instrument/devices involved in a certain close loop in order to conclude for the normal functionality of all the process instrument/devices and to rectify occurrence problem in the system and also pre-final and final loop check for variable types of Foundation Fieldbus and Analog transmitters (YOKOGAWA, ABB, ROSEMOUNT,ENDRESS HAUSER, etc.) thru Distributed Control System (DCS).Responsible for monitoring the actual action and behavior of instruments/devices from the field thru Distributed Control System (Boardman) using INVENSYS-FOXBORO system during pre-loop, final loop and functional test.

Supervises in performing bench and field calibration of process instrument and modifying control loops, removes/replaces, instruments, add and deletes systems. Includes loop check and functional testing of smoke, fire alarm, and gas detectors such as hydrogen sulfide (H2S), hydrocarbon (HC), butane, methane and ammonia. Pre-configuration of field instrument/devices prior for loop/individual test such as motorize operated valves, (MOV’s) control valves (CV’s), special design process variable transmitter such as level transmitter radar type, probe type and ultra-sonic flow meter.

Conduct solo run test for all the utility pump motor associated with the local/remote/off position indicator from the motor switch board panel includes the instrument/devices such as pilots light, hand switch, and local stop-push button switch employing single phase, 110volts AC and synchronized/permissive control signal from Process Interface Building (PIB) to Electrical (Power) Sub-station and field motor.

Diagnosed faults/trends and takes or recommends appropriate corrective action as per required and ensures adequate resources to carry out the activities e.g. hand tools, test equipment and materials needed. Attended orientation for safety awareness, hygiene and proper safety procedure on the job site as per required of client safety department such as personal protective equipment (PPE), working at heights, confine space entry, hydrogen sulfide (H2S) and lockout-tag out equipment procedure. Involved in a multi-cultural environment atmosphere, pro-active experience approach to problem solving, creative, analytical thinker with a time management skill and work effectively to achieve result that involve in project objectives.

Client Project:

June 28, 2010 to May 10, 2011

National Chevron Philips (NCP)

Japan Gas Corporation Arabia Ltd. (JGC Arabia)- Main Contractor:

Utilities and Tankage North Plot Area Package D Project

Jubail Industrial City, Saudi Arabia

Instrument Technician

Job Description:

Execute Remote Instrument Building (RIB) cabinet termination as per Engineering standards and procedure as well as modification/rectification, installation/ assembly terminal blocks and railings prior to cable termination. Responsible for all in-coming cable from the field instrument/devices to Remote Instrument Building (RIB). End-to-end cable check (continuity test) prior to termination in order to eliminate, correlate or eliminate cable swapping. Performed field instrument/device signal cable termination such as variable transmitter, sensors, proximity switches including different types of valves; control, solenoid and motor operated valves. Furthermore, field instrument/device junction boxes such as compressor switch board panel, pump motor local control panel and ground flare stack local switch board panel.

Breathe-knowledge/material take-off/installation of main cable trays underneath Remote Instrument Building (RIB), supports and cable gland plates prior for the signal cable entrance, cable gland and tray covering after completion of cable listed as per subcontractor cable schedule. Responsible for the proper location, field destination and signal cable assignment on its marshaling termination cabinet. Initiate inspection and implementing quality standards on instrumentation activities prior for issuance of request for inspection (RFI) as per required by the quality control department and/or client firm.

Vendor’s assistant of ATLAS COPCO compressor, diagnoses discrepancies occurrence in every single instrument/devices involved in compressor automatic function associated to the next stage relevant with the system designed. Preliminary functional testing of the whole compressor packaged, (from field instrument/device, to Remote Interface Building and supply power from sub-station as per standard procedure prior to system turnover.

Vendor’s assistant of CALLIDUS ground and elevated flare stack, actual ocular checkup, point to point termination of temperature sensor located at flare stack burner to ensure consistent contact and appropriate material needed that can stand high temperature. Individual functional test of temperature igniter transformer rated 110VAC/5kVAC for high voltage ignition and on/off valves sequencing base on its logic design. Split range temperature control valves field calibration and functional test. Perform loop testing with the various instrument/devices associated in flare stack package using EMERSON process management in Distributed Control System (DCS) and DELTA V for logic controller.

Complies with the strict compliance of all QA/QC, safety procedures, and company rules, and regulations up to the highest level of safety during all stages of project execution to avoid any type of injuries/accidents and or incidents.

Client Project:

July 17, 2009 to June 15, 2010

Worley Parson

Samsung Engineering Ltd. - Main Contractor:

Ma’adenAmmonia Phosphate Project

RasAsZawr, Saudi Arabia

Instrument Technician

Job Description:

Handle electrical jobs in Power sub-station, from installation/alignment of switch gear cabinet, marshaling control cabinet (MCC), bus bar connector installation in every cabinet, and preparation of entrance cable hole underneath each cabinet. Perform power cable termination in marshaling control cabinet (MCC), field electrical devices like utility pump motor and electrical switch board panels. Familiar, experienced in medium and low voltage termination of switchgear panels, transformers and lighting fixtures all over the project scope. Conduct solo run test for all the utility pump motor associated with the local/remote/off position indicator from the motor switch board panel includes the instrument/devices such as pilots light, hand switch, and local stop-push button switch employing single phase, 110volts AC and synchronized/permissive control signal from Process Interface Building (PIB) to Electrical (Power) Sub-station and field motor. Individual and functional testing of plant paging system and smoke sensors/detectors using magnet stick elements;

Installation of industrial lighting fixtures, local panel switchboard, smoke sensors/detectors and plant paging system. Fabrication, installation of stanchion, perforated cable trays, perforated cable tray steel support, sunshade and process instrument in designated location with complete identification such as hanging phenolic tags, set range and process identification tag, includes conduct/performed Pneumatic leak testing of all process pressure transmitter/devices such as control valves, solenoid valves, pressure, level and flow transmitters.

Client Project:

March 15, 2008 to July 15, 2009

Saudi Basic Industrial Corporation (SABIC)

Samsung Engineering Ltd. - Main Contractor:

Polypropylene and Product Handling Project

Kayan Petrochemical Company (Affiliated: SABIC)

Jubail Industrial City, Saudi Arabia

Instrument Technician

Job Description:

Perform instrument and power cable termination at Remote Instrument Building (RIB) involved marshaling cabinet as per engineering standards and procedure termination drawing as well as junction boxes (JB’s)as per required by the client firm. Responsible for the correct routing/destination/orientation of instrument and power cable entering in the RIB as well as in field associated such as process instruments/devices, switches, lamps, junction boxes, and local switch board panel. Authorized for vendor’s panel interconnection wiring such as data patch, serial, and fiber optic connection. Furthermore, perform re-wiring and wiring vendor panel as per vendor connection drawing/diagram including installation of all panel accessories such as automatic voltage transformer (AVR), terminal blocks rails, modules barrier and terminal blocks used for cable termination.

Leads and controls skilled labor and work crews engage in all activities concerned with the instrumentation works of the project. Preparation of materials needed concerning instrumentation activities such as fabrication of junction boxes support and frame, perforated trays and instrument air tubing, Ensure that hand tools and power tools are available and working condition before the activities begin as to execute in accordance with the drawings, documentation and specifications consistent with the company procedure and practices.

August 25, 2005 to Dec 15, 2008

Victorias Milling Company, Inc. (VMC)

Negros Occidental, Philippines

Instrument Maintenance Technician

Job Description:

Perform routine maintenance, installation and integration of various types of process control instrumentation equipment such as process transmitters, controllers, integrators, recorders, square root extractors and final drive elements. Make repairs of electrical power, motor and motor control circuits. Able to interpret schematic diagram drawing (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagram, etc. Associated circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistor, capacitors, etc.) and common industrial electrical and hardware (relays, contactor, starters, etc.).

Good mathematical skills to include basic algebra for of electrical/electronic equations as applicable in daily process operation. Able to install electrical conduit of the various trade size (pvc, emt, rigid) and install process instrument tubing. Ability to analyze problems, identify solution, project consequences of proposed actions and implementations in the support of goals.

Routine maintenance which includes but not limited to the following:

a.Field fault analysis – determines if instrument has failed or if it is a process problem;

b.Field calibration of instrumentation utilizing proper test equipment;

c.Complete overhaul in shop environment to include component replacements, alignment and calibration to specification of record;

d.Repair of signal transmission signal facilities such as tubing, wiring, etc.;

e.Instrument to include pneumatic, electronic and digital equipment;

f.Fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V/ 480V/ 3-phase) and common utility / lighting circuits;

g.Installation of new control circuits, modification of existing process instrument/electrical system as requested, to include design, load and implementation of new logic control;

h.Fault analysis of PLC base system with control logic modification if required.

Prepares for inclement weather by taking necessary precautions including, but not limited to, checking condition of heat tape, boarding of windows, securing loose equipment and any other related assignments as directed by district Management.; and Develops, prepares and presents recommendation and reports as requested.

VICTORIAS MILLING COMPANY, INC.

Victorias City, Negros Occidental,

Philippines

Company Profile

One of the earliest sugar milling and refining facilities in the Philippines, employs 1000 craftsmen, and produces up to 25,000 bags of sugar per day.

October 15, 1998 to July 10, 2005

NATION BROADCASTING CORPORATION

Makati City, Metro Manila

Philippines

Tel.: (063-**-***-****

Radio Operator/ Maintenance

Job Description:

Setups, operates, and maintain the electronic equipment used to transmit radio and television programs. Control audio equipment to regulate volume level and quality of sound during radio and television broadcasts. Operate radio transmitter to broadcast radio and television programs. Maintain programming logs as required by station management and the Federal Communication Commission. Control audio equipment in order to regulate the volume and sound quality during radio and television broadcasts. Monitor strength, clarity, and reliability of incoming and outgoing signal and adjust equipment as necessary to maintain quality broadcasts. Regulate the fidelity, brightness, and contrast of video transmission, using video console control panels. Observe monitors and conserve with station personnel in order to determine audio and video levels and ascertain that programs are airing. Preview scheduled programs to ensure that the signals are functioning, and programs are ready for transmission. Select source from which programming will be transmitted. Report equipment problems, and ensure the repairs are made; make emergency repair to equipment when necessary and possible.

Record sound onto tape or film for radio and television on-air checking its quality and making adjustment where necessary. Align antenna with receiving dishes and transmitting element in order to obtain the clearest signal for transmission and reception of broadcast from field and studio locations. Organize recording sessions and prepare areas such radio on-air booths and production booths for recording. Perform minor and major preventive maintenance using appropriate tools. Read radio and television programming logs in order to determine which program to be aired. Instruct trainees in how to use radio and television production equipment and how to copy/edit graphics or sound onto video tape/film and disc.

NATION BROADCASTING CORPORATION

Makati City, Metro Manila

Philippines

Tel.: (063-**-***-****

Company Profile

A commercial radio and television satellite network in the Philippines (subsidiary of PLDT) that covers all over the country, having fifteen (15) amplitude modulation (AM), fifteen (15) frequency modulation (FM) stations and three (3) Ultra High Frequency (UHF) television station in three major areas in the Philippines.

PERSONAL INFORMATION

Age : 40

Birth Date : May 27, 1979

Height : 170 cm

Weight : 75 kg

Civil Status : Married

Religion : Roman Catholic

In case of emergency, please contact:

Mrs. Judi Gustilo-Aquino

Gethsemane road, Casunsingan Mandaue City, Cebu

Philippines 6014

Tel.: +63-092*******/ +63-090********

EDUCATION

Diploma: Industrial Computer Technician

Capitol Institute of Technician

Bacolod City, Negros Occidental

Philippines

Industrial Electronic Technician

Capitol Institute of Technician

Bacolod City, Negros Occidental

Philippines

Attended taken: Afternoon Session-1996-1998

General Radio Communication Operator

First Class Radio Telephony

NTC registration #: 98-1PVI-22536

Bacolod City,Negros Occidental

Philippines

Attended taken: Morning Session-1996-1998

SPECIAL SKILLS

Experience in leading the Commissioning aspect of large value EPC Projects in the Oil & Gas Industry.

Experience in overseeing the complete commissioning function from start to finish on sizeable projects process plants (Saudi Kayan Polyethylene, Maaden Amonia Plant, Saudi Chemical North phase and Aramco Hydro core Project) Saudi Arabia.

Experience in both construction and testing commissioning supervision, troubleshooting, client facing ability, strong communication skills and man management ability.

Develop strategy for execution of pre-commissioning, commissioning and start-up of the project; Planned and scheduled pre-commissioning & commissioning activities.

Develop systems, sub-systems and pre-commissioning & commissioning works lists; Prepare pre-commissioning procedures and systems commissioning procedures for issue.

Knowledge in Computer networking and configuration

Background in network administration

Thorough understanding in radio broadcast technicalities, principles and operation

Knowledge in Microsoft Office (Word, Excel, Power Point)

Knowledge in RCS (radio broadcast software) and Corel draw 9 ( image editor application)

SEMINARS/TRAININGS ATTENDED

August 12 - 14, 2018

(APAVE) Preparation for the Authorization of Electricians

LRT, Lusail Office

Doha, Qatar.

February 20 - 21, 2018

Compressor type Surge Vessel

Mesaieed Town RPS Site Office

Doha, Qatar.

December 22, 2011

Emerson- Mobrey Level Switch Training

Mesaieed Town RPS Site Office

Doha, Qatar.

December 22, 2011

Saudi ARAMCO Certified Calibration Technician

Manifa Core Hydrocarbon Facilities Project

Snamprogetti Ltd. (A company of Saipem)

Ref. #: MCHF-SP-MMG-L-1640-11

Manifa, Saudi Arabia

Jan. 19 - Feb. 23, 2008

CPI, (Calibration for Process Instrumentation)

MFI Technological Institute, Meralco Center

PasigCity, Philippines

December 06, 2002

Transform your Business with IBM Seminar

Sponsored: Integrated Business Machine (IBM)

Negros Occidental, Philippines

November 15, 2007

The Digital World Today Seminar

Kapinasananngmga Broadcaster ng Pilipinas

Clark Special Zone, Pampanga, Philippines

Passport number: P4303813A

Date of issued: 07 SEPTEMBER 2017

Expiry date: 07 SEPTEMBER 2022

Place of issued: Doha

Ronie Gutierrez Aquino

Applicant’s Name

Contact this candidate