CARLITO BUAN CENA

Contact no: +974-******** /+639**-*******

Email. adashv@r.postjobfree.com

POSITION APPLYING FOR : ELECTRICAL ENGINEER

PERSONAL BACKGROUND:

Place of Birth : Batangas City, Philippines

Date of Birth : November 4, 1969

Nationality : Filipino

Current Location : Qatar

EDUCATIONAL BACKGROUND:

Degree: BACHELOR OF SCIENCE IN INDUSTRIAL ENGINEERING

Major: Electrical Engineering Technology

Batangas State University (BSU)

Technical Course: DIPLOMA OF INDUSTRIAL TECHNOLOGY

Major: Electrical Technology

Batangas State University

CERTIFICATE OF TRAINING

PERFORMING AUTHORITY

QATAR PETROLEUM

DATE: April 26, 2017

H2S/BA TRAINING CERTIFICATE

QATAR PETROLEUM

DATE: May 31, 2017

BASIC OVERHEAD CRANE OPERATOR SAFETY

QATAR PETROLEUM

GL- GERMANISCHER LLOYD

DATE: February 21, 22 & 23 2017

TEAM BUILDING DYNAMICS WORKSHOP

NAKILAT-KEPPEL OFFSHORE & MARINE

CELLS MANAGEMENT AND CONSULTANCY PTE LTD

DATE: February 7, 2012

PMS OPERATOR & MAINTENANCE TRAINING

ABB OY, SUBSTATION AUTOMATION SYSTEMS

DATE: 13 & 14 December 2011

BASIC PROGRAMMALE LOGIC CONTROLLER (PLC) TRAINING

STEEL CORPORATION OF THE PHILIPPINES

DATE: 14 & 15 March 2000

WORK EXPERIENCES AND RESPONSIBLITIES

POSITION: ELECTRICAL SUPERVISOR

COMPANY: SPIE Oil & Gas Services Middle East

Project : QP-RLIC Facilities and Utilities, Qatar Petroleum

NAKILAT DAMEN SHIPYARD QATAR- NDSQ,

NAKILAT-KEPPEL OFFSHORE & MARINE-NKOM

DURATION: From October 1, 2016 to Present

JOB RESPONSIBILITIES

OPERATION, REPAIR AND MAINTENANCE OF ELECTRICAL SUBSTATION & OTHER ELECTRICAL SYSTEM.

oExecuted hands-on switching operation the HV, LV & MV Switchgear and preventive maintenance of transformer 11/.433KV for under-ground and above ground Sub Station, Distribution Board Panel, PLC Panel, VFD, UPS Battery & Chargers, Socket & Lightings, associated electrical equipment and control system.

oHands-on performed and executed electrical equipment testing (Insulation Resistance Test -IR test, Contact Resistance Measurement-CRM test & other required basic electrical equipment test)

oHands-on synchronizing the Power Diesel Generator (PDG) Set.

oHand-on maintenance and execute operation the High Ways road street Package Unit Sub Station-PUSS ring circuit, road-street lighting (Hi-Mast lighting) and feeder pillar control panel with automatic multi control system-timer and photo cell.

oExecuted troubleshooting process on the electrical system and equipment to ensure operational readiness.

oProvided input developing maintenance strategy and skills to increase the effective maintenance work.

oAdministrative daily, weekly and monthly report and other supporting documents which are required by client.

oProvided and created works orders for preventive and corrective maintenance from maintenance work flow system (SAP) and update the improvement of company properties and asset to ensure all are met in specific date and time.

oAttended the client daily meeting and update the daily output activities as well as discussed the daily plan work site activities.

oProvided a safe, successful, timely and economical electrical maintenance & repair service for all onboard electrical equipment within the area of responsibility.

oAssisted and executed the electrical installation, testing and commissioning, modification and repair of electrical equipment with vendors.

oEnsured the team is carryout the works according to the plan, policy and procedure.

oExecuted and implemented the daily preventive and corrective maintenance (PPM) task base in the client standard and procedure which regards safety compliance.

oAttended on-calls duty on emergency task if require immediate response.

oPlanned and controlled the electrical maintenance team to facilitate the safe and efficient operation to meet the company maintenance and strategy policy.

oLeaded the activities on workshop on daily basis to ensure correct safety procedure was followed and coordinated with other responsible team.

oApplied PTW for different electrical task with standard operating procedure and approved Job Safety Analysis & Method of Statement.

Followed all relevant company Health and Safety policies, processes, procedures and instruction to ensure compliance in all aspect of fields of work.

Applied all safety policies and procedure to self and others to ensure reasonable care of the health and safety of the team.

POSITION: ELECTRICAL ENGINEER-FACILITIES & UTILITIES

COMPANY: NAKILAT-KEPPEL OFFSHORE & MARINE Ltd.

Southern Breakwater, Ras, Laffan Industrial City

Doha, State of Qatar

DURATION: June 01, 2011– February 9, 2016

OPERATION, REPAIR AND MAINTENANCE OF ELECTRICAL SUBSTATION & OTHER ELECTRICAL SYSTEM.

JOB RESPONSIBILITIES

oAssisted with the review of Single Line Diagram (SLD) and controls strategies for start-up and safe operation of equipment.

oAnalyzed and reviewed operating manuals and start up procedures varied electrical equipment.

oVerified equipment and system were electrically complete when hand over.

oInstallation, tested and commissioned the electrical HV, MV &LV switchgear (11/.433KV), Distribution Panel (220/110Vac), Lighting and Power, UPS, Generator, Variable Frequency Drives (VFD), Transformer (11/.433KV) electrical socket and associated electrical equipment & control system.

oPlanned & started-up of HV, MV & LV switchgear and associated electrical equipment and control system.

oAssisted the equipment vendor and system engineer to initiate the full performance of the electrical equipment and control system.

oAssisted the plant manager to train the maintenance technician and other workforce in the field of specialization.

oIndependently conducted commissioning and inspection and executed commissioning tests base on company procedure and requirements

oPlanned and maintained the work system, procedures, and policies that enable and encourage the optimum performance of the people for offshore and onshore activities.

oExecuted hand-on switching operation the HV, LV & MV Switchgear and preventive maintenance of transformer 11/.433KV for under-ground and above ground Sub Station which is required on preventive maintenance activities and ensure the safety standard.

oExecuted and understanding the testing and commissioning requirements for cable earth, grounding, generators, Automatic Transfer Switch (ATS), lighting and lighting controls, UPS and battery charging system, over current protection and related electrical system.

oExecuted hands-on synchronized the Power emergency Diesel Generator (PeDG) Set.

oHand-on maintenance and execute operation the High Ways road street Package Unit Sub Station-PUSS ring circuit, road-street lighting (Hi-Mast lighting) and feeder pillar control panel with automatic multi control system-timer and photo cell.

oIdentified abnormal system conditions, determined cause and recommended actions.

oVerified the safety of all employees and contractors working in operating unit or department by driving continuous improvement towards a true safety culture. This includes supporting all corporate safety programs; developing SOP’s, identifying and eliminating hazards and enforcing all safety rules.

oExecuted and conducted tool box talk or meeting prior start the job to secure the safety measure are implemented and job safety analysis well clear with regards the proper work methods or method of statement- MS, techniques and compliance with applicable standard and specifications to ensure adherence to established guidelines, rules and regulation.

oMaintained efficient records on operation and activities (logbook) and coordinate and prepare a variety of reports.

oAttended to urgent operational equipment failure and reports and include recommendation to prevent such failures re-occurring.

ABILITY TO:

Can plan and execute repair, maintenance and installation of controls and equipment.

Ability to use any type of electrical power tools, hand tools and measuring equipment such as Multi-meter, Megger, Contact resistance Meter, Clamp Meter, Hi-Pot- Hi-Potential measurement equipment, Secondary Injection Equipment- OMICRON 356 and Earth Tester- KEW 4106.

Can troubleshoot and diagnose problem.

Can read and interpret technical illustration, SLD-HV, MV & LV schematic, single Line Diagram and associated electrical controls.

Can operate office equipment including computers and supporting software application.

Can work under steady pressure with frequent interruption.

POSITION: LEAD ELECTRICAL SUPERVISOR- CONSTRUCTION

INSTALLATION, TESTING & COMMISSIONING

COMPANY: DAEWOO E & C (ENGINEERING & CONSTRUCTIONS)

COMPANY AWARD: GOLD AWARD-OUT STANDING EMPLOYEE OF THE MONTH of JANUARY 2011

DURATION: December 2007- March 2011

PROJECT INVOLVES:

NAKILAT-KEPPEL OFFSHORE & MARINE

Southern Breakwater, Ras Laffan Industrial City

Doha, State of Qatar

July 2010 – March 05, 2011

QATAR CHEMICAL COMPANY-Q-CHEM

Messaeid, Industrial City

Doha, State of Qatar

December 2007 - March, 2010

JOB RESPONSIBILITIES

oExecuted, tested, commissioned the program in electrical discipline and associates work scope and coordinate, assist during pre-commissioning and commissioning activities.

oExecuted and understanding the testing and commissioning requirements for cable earth, grounding, generators, Automatic Transfer Switch (ATS), lighting and lighting controls, UPS and battery charging system, over current protection and related electrical system.

oPerformed primary and secondary testing of instrument transformers (current and voltage transformers), polarity and rotation.

oHand-on installation, testing, commissioning and execute operation the High Ways road street Package Unit Sub Station-PUSS ring circuit, road-street lighting (Hi-Mast lighting) and feeder pillar control panel with automatic multi control system-timer and photo cell.

oTested of HV, MV switchboards including apparatus i.e circuits breakers, disconnecting switches, earth switches and including testing of LV switchboards, loop test to control and supervised the computerized system and fault recorder.

oPerformed scheme test or functional tests, testing of inter-trip panel and tripping matrix and monitor the electrical interlocking schemes.

oEnsured the commissioning obligations of the project are carried out in accordance with the terms of contract, quality and schedule in conformance with good practice of commissioning standards.

oDefined and requested work or test permit, release service operation and to follow-up of clearance works and responsibility in handling over commissioned system to the operation team.

oUtilized and managed the documentation for electrical commissioning such as taking over certificates, as built drawing, manufactures manuals and instruction, test procedure, risk assessment, health and safety method of statement and end of commissioning reports.

oMonitored and directed supervision the technician on project site.

oEnsured all quality controls records like test reports, equipment calibration certificate, designed modification request.

oCompiled, consolidated and follow-up the end of electrical commissioning reports and preparing the taking over of system or sub-system for operational team.

oReviewed the construction method statement, pre-commissioning procedure and endorse red marks drawing and dossiers.

oControlled and endorsed work permit for the project work and ensure that QPs safety standards safety regulation, project safety plan was understood and followed by contractors.

oInspected construction works and materials in accordance with the project Quality Plan and inspection Test Plans.

oAttended weekly progress meeting, update the daily and weekly construction progress reports and verify contractor progress for accuracy.

oCoordinated with end users, prepared and categorized punch list and ensure that the contractor clear punch list items.

POSITION : ELECTRICAL TECHNICIAN

COMPANY : STEEL CORPORATION OF THE PHILIPPINES

BALAYAN, BATANGAS PHILIPPINES

DURATION : October 1997 – September 2003

JOB DESCRIPTIONS

oOnline plant wide inspection and monitoring.

oAssisted the engineer in installation, testing and commissioning of electrical equipment i.e Electrical switchgear, Distribution Panel, socket and lighting system.

oCable pulled, laying and tagging, installation the cable tray and trenches, conduit pipe layout and installation, earth and lightning copper bare bar installation.

oDiagnosed cause of electrical & mechanical malfunction or failure of operational equipment and performs preventive and corrective maintenance.

oPerformed the preventive and corrective maintenance activities.

oPlanned, direct records the periodic electrical testing, recommends or initiates modification and replacements of equipment which fails to meet acceptable operating standards.

Contact this candidate