Mechanical Engineer
Resume:
CURRICULUM VITAE
M.MOHAMMED FAYAJ
Abu Halifa, Kuwait
adaq3o@r.postjobfree.com
Position Applied for : MECHANICAL ENGINEER
Qualification : B.E., Mechanical Engineering in Anna University Mohamed sathak engineering college,Kilakarai (2009-2012) CAREER OBJECTIVE:
A highly motivated, confident individual with exception multi –tasking and organizational skills. Able to exhibit confidentiality, discretion, tact, diplomacy and seeking a challenging position,. To achieve organizational goals and reach the pinnacle of success in sprit of team work by utilizing my educational background and skills. To take up a challenging career and grows with honesty, loyalty, good relationship and best performance and translate my experience, knowledge, skills and abilities into value for an organization. NOTE: -
HAVING MEMBERSHIP CARD & NOC IN KUWAIT SOCIETY OF ENGINEERS
HAVING APPROVAL AS MECHANICAL ENGINEER IN KOC
HAVING KUWAIT VALID DRIVING LICENSE
HAVING APPRECIATION LETTER IN KNPC
KEYS OF SKILL & COMPETENCIES:
I have about 7 Years in design & construction field of which is related with petroleum refinery / Engineering Company. I am capable of working independently and conversant with the following activities related to engineering design and construction
Ability to work in a fast paced environment and handle multiple tasks
A resourceful team player with great attention to details
Good experience working as piping field engineer
Preparation of equipment data sheet, design drawings for material procurement 2
Familiar with international Standards & codes, ASME 31.1, ASTM ASME SECTION -II, ASME SECTION-VIII
Ensure safety standards and procedure are implemented are followed in accordance with contract requirements
Review and evaluate technical submittals and shop drawings according to required project standards
Responsible for and report on the scheduling of project activities in conjunction with project target
RESPONSIBILITES:
DEC - 2016 TO TILL DATE GULF ENERGY COMPANY SUPPLY TO M/S AL-KHADDA – KUWAIT MECHANICAL ENGINEER @EF-1877-42” PROJECT o Proficient in understanding isometric, plan and piping & instrumentation drawings.
o Strong Supervising skills in fabrication and erection of piping and structural works as per the issued for construction drawings.
o Supervised erection of piping and structural fabricated spools on site as per the Isometric and plan drawing
o Able to prepare punch list of line, prepare the line for hydrostatic testing as per the Approved hydrostatic test package and marked on the isometric & P& ID drawing for the limit of test.
o Conducting hydrostatic test in accordance with the approved hydrostatic test procedure.
o Reinstatement of line for the punch item B & C.
o Supervising the foremen and leadsmen and assigning jobs as per their experience and capability.
o Explain the assigned jobs to foremen and leadsmen and keeping proper track of their progress and monitor to ensure that discipline related activities. o Arranging equipment as per the requirements and priority of job. o Planning of job in advance as per priority basis. o Shutdown works purging, spading, removal of the Old valves and Erection of the new valves,
3
o Pipe Supports, air leaks testing, Hydro testing for Spools o Line Installation of spool pieces’ spacers and blind flange o Modification of pipe lines as per field condition. Prepare the line for hydro test as per hydrostatic test package. Punch List works, Commissioning of Project o Installation of 42” pig LANCHER / RECEVER and the installation associate piping works
o Preparing & maintained the progress reports day by day. PROFESSIONAL SKILLED:
o Preparing the pre-commissioning procedures for the turnover systems as prescribed by the design engineers.
o Supervising a complete P&ID punch list of the systems as they are turned over to o pre-Commissioning as mechanically complete.
o After punch lists were cleared, did the preparation of the systems for air blowing or water flushing to clean any dirt and/or debris from the piping. o After cleaning the systems each was reinstated to operable condition for drying and boxing up.
o All of the systems had to be signed off by the client for cleanliness and the cold systems were checked and signed off for dryness.
o 42” Split tee welding on on-line pipeline for hot tapping successfully completed in 42” HP pipeline project KOC
o Preparation of hydro test piping / pipeline for 42” & 40 “test pressure upto 60 bar with blow off and drying line with dew point -40 c o Nitrogen purging and spading exiting valves in KOC o Preparation of pre-commissioning & commissioning jobs. o Plan and organize, including generation of programmers. Follow-up and optimum resource utilization, Control and monitoring of departments man-hour expenditure including indirect hours, overtimes and days off to workers. o Installation of jib crane capacity 5ton & carried out load test up to 7.5 ton as per KOC standard
4
COMPANY : AL-KHADDA COMPANY
CLIENT : KOC –BS 180-GPM TEAM
PERIOD : FROM DEC -2016 TO TILL DATE
PROJECT TITLE : 150*****-**” HP FUEL GAS PIPE LINE PROJECT POSITION : MECHANICAL ENGINEER
JUNE-2013 TO DEC -2016– STORK GENERAL TRADING & CONT.CO.WLL-KUWAIT MECHANICAL ENGINEER OIL & GAS SECTOR
Responsible of plan, organize, execution of piping pipeline fabrication Equipment installation and erection works
Allocation of material, man power and equipment for daily work activities
Monitor all piping installation and modification activities
Ensure the productivity and high quality of the subordinates and sub-contractors activities
Allocation of material, man power and equipment for daily work activities
Provide assistance in pre-mechanical completion activities
Coordination with site supervisor to take work permit
Attending client monthly safety meeting to report contract safety awareness report, near mis report, substandard condition
Initiating of preparation of isometric drawing, welding detail drawing and NDT-required sketches for inspection & corrosion dept. For shutdown activities/ pre-planning schedule works.
Site survey, field dimension, site sketch for low pressure & high pressure leaked pipes & piping fittings
Conduct frequent audits and document the outcomes to verify that enough efforts have been put in the areas of productivity, safety and quality
Ensure that all work is carried out to the required quality in the best possible manner and within the guidelines of industry’s best engineering practices
Stringing, fit up & welding of 30” pipeline (3LP coating) at inside shuiba up to 900meter 5
COMPANY : STORK GENERAL TRADING & CONTRACTING.
CLIENT : KNPC – MAA,MAB &SHU
PERIOD : FROM JUNE 2013 TO DEC 2016
PROJECT TITLE : CA/3956-ON-LINE LEAK SEALING & EQUIPMENT POSITION : MECHANICAL ENGINEER
COMPANY : STORK GENERAL TRADING & CONTRACTING.
CLIENT : PIC- PETRO CHEMICAL INDUSTRY
PERIOD : FROM JUNE 2013 TO DEC 2016
PROJECT TITLE : 12-15947/L-ON-LINE LEAK SEALING & EQUIPMENT POSITION : MECHANICAL ENGINEER
COMPANY : STORK GENERAL TRADING & CONTRACTING.
CLIENT : PIC- PETRO CHEMICAL INDUSTRY
PERIOD : FROM JUNE 2013 TO DEC 2016
PROJECT TITLE : 80000014 -ON-LINE LEAK SEALING & EQUIPMENT POSITION : MECHANICAL ENGINEER
JOB DESCRIPTION & RESPONSIBILITY
24” pipeline cleaning by using pigging for 2km utility lines.
Mandrel Pigs are made up of component parts that mount on a steel body allowing multiple configurations and the replacement of individual parts.
Individual parts may consist of: cups, magnets, and discs scraping elements, including brushes, or blades for cleaning.
42” Split tee welding on on-line pipeline for hot tapping successfully completed in 42” HP pipeline project KOC.
6
30” Bypass line welding,installation,hydro test & drying a. Stopping installed in split tee by STATS
b. 42” Tie-in using 5D bends in main line FG-70
c. Inside BS-180 carried out 42” & 40” piping installation, fit up,welding’s
& torquing.
d. Installation of 42” ESDV & air vessel tank.
MAY 2012 TO MAY. 2013 ALPAN ENGINEERS CONSTRUCTERS PRIVIVATE LIMITED – INDIA PIPING DESIGNER
COMPANY : ALPAN ENGINEERING & CONSRUCTION
CLIENT : TR TECHENICAL RENEUDS LTD
PERIOD : FROM 2012 TO 2013
PROJECT TITLE : SATHARA
POSITION : MECHANICAL ENGINEER
JOB DESCRIPTION & RESPONSIBILITY
Checking Piping Isometrics & MTO
Study project scope, P&ID, piping plan, equipment GA drawing
Review construction drawing of equipment and piping meets or exceed the specification standard
Client complaint handling regarding installation work and procedures and ensuring the work should be done as per design general specification and inspection and test plan
Supervise all piping activities like fabrication, Erection, Welding and testing up to pre- commissioning activities with safety
Equipment layout, Piping modeling, Equipment modeling
Checking & Preparation of Piping Layout
Supervise all equipment internal tray installation, distributor pipe installation, Equipment internal cleaning, final inspection and equipment final box up
Pipe rack sizing, planning and developing pipe rack intersections 7
Assigning resources and manpower for different activities and ensuring execution of activities within the specified time
Installation of internals in Columns & Reactors as per equipment drawing and specification and ensuring the safety rules to be followed in confined spaces.
Review & commenting Vendor drawings
Leak sealing designing
Invoice preparation & documentation maintenance
Design the clamp up to 130 bar & I able to stop the leak up to 130 bar and 900 C temperature on on-line service piping
Preparation of quantity material MTO as per P&ID
Proficiency in blueprint reading, pipe layout, subcontractors scheduling, material procurement, safety policies implementation, and lockout tag out procedures
Developed conceptual skills and produced detailed technical drawings using 3D and 2D
Improving the design, performance and efficiency of existing products
Writing professional progress reports for project managers and clients. Compile test qualification schedules and reports when required. Undertaking simple draft stress calculations, weight calculations. Considering issues such as cost, safety and time constraints. Communicating with customers and suppliers to resolve design issues. Checking drawings for accuracy and errors.
Implemented hydrostatic tests on systems to ensure they will function under the designed pressures and temperatures
Academic Qualification : B.E., Mechanical Engineering in Anna University, Software Knowledge:
Operating System: MS Office, MS excel and MS
PowerPoint & MS outlook
AUTOCAD 2D & 3D Modeling
PRIMAVERA (planning software)
PDS – Piping/Equipment Modeling
Micro station & Smart Plant Review
8
Languages Known:
Arabic (Speak)
English
Tamil
Hindi & Urdu
Personal Information:
Date of Birth : 01.08.1991
Gender : Male
Marital Status : married
Religion : Muslim
Nationality : Indian
Passport No. : K3007072
Date of Issue : 17.02.2012
Date of Expiry : 16.02.2022
Civil id No. : 291*********
DECLARATION:
I hereby declare that the above statements made are correct and true to the best of my knowledge and belief.
Date: 09/09/19 Thank You,
Place: Kuwait Mohammed Fayaj
Contact this candidate