Highly skilled mechanical engineer

Education

B.E in Mechanical Engineering CGPA : 7.4 / 10 2016-2019

St.Joseph’s Institute of Technology, Sholinganallur

Diploma in Mechanical Engineering Percent : 82% 2013-2016 Bharath Polytechnic College, Selaiyur

High School Percent : 71% 2012-2013

Christ The King, Medavakkam

BALASUBRAMANIYAM K

Citizenship : Indian Date of birth : 19 December 1997 Contact

Phone : +91-979*******

e-mail : *******@*****.***

Career Objective

To pursue a challenging career and be a part of a progressive organization that gives scope to enhance my knowledge and utilizing my skills towards the growth of the organization. Projects

1. ECO FRIENDLY WELDING BY HYDROGEN FUEL CELL 05/09/2017-15/03/2018 Most of the countries are doing research in the development of renewable sources of energy to replace the fossil fuel as it is lacking day by day. So there in this project we are going to discuss about the use of hydrogen fuel cell for welding torch. As most of the welding is done either by the gas (Acetylene) or by electricity directly. This paper shows the use of an electrolysis process in which water splits into hydrogen and oxygen when electricity is supplied to it, which is further used as a flame for welding. In addition to hydrogen cell we had design and fabricate various safety devices specially made for hydrogen.

2. PERFORMANCE ANALYSIS OF DIESEL ENGINE WITH ADDITION OF HYDROGEN 24/09/2018-30/02/2019 The unburnt hydrocarbons (HC), carbon monoxide (CO), nitrogen oxide (NOx), sulfur oxide (SO2), etc present in the vehicle emission plays a major role in air pollution. Hydrogen is one of the alternate fuels under current research. In this project, a hydrogen dry cell is fabricated to produce the hydrogen. The hydrogen is added into the air intake system of a 4 stroke diesel engine. The performance evaluation and emission test are carried out. The test result indicates considerable improvement in the performance of a diesel engine. There is a significant reduction in the emission of CO, CO2, NOx, HC, and an increase in the amount of oxygen 3. FLY WHEEL BASED REGENERATIVE ENERGY MANAGEMENT SYSTEM 03/12/2015-05/03/2016 Energy storage systems (ESS) provide a means for improving the efficiency of electrical systems when there are imbalances between supply and demand. Additionally, they are a key element for improving the stability and quality of electrical networks. They add flexibility into the electrical system by mitigating the supply intermittency, recently made worse by an increased penetration of renewable generation. Flywheels have attributes of a high cycle life, long operational life, high round-trip efficiency, high power density, low environmental impact, and can store megajoule (MJ) levels of energy with no upper limit when configured in banks. 4. FASTEST LINE FOLLOWER for Robot club 02/07/2018-05/09/2018 Line follower robot is a mobile machine that can detect and follows the line drawn on the floor by the 16 IR array sensor and Raspberry Pi 3 processer. Designed and fabricated a sleek and weightless chassis by using 3D printer. Conference Paper

Presented Technical paper on “Eco Friendly Welding by Hydrogen Fuel cell” at TIME-2019-National Conference Dr.M.R.G Educational and Research Institute

Presented Technical paper on “Performance Analysis of Diesel Engine with Addition of Hydrogen” at National conference Organized by SAE in Rajalakshmi Institute of Technology Software Skill Set

Software skills: Solidworks, Ansys, Autocad

Programming skills: CNC Turning, Milling.

Technical Symposiums

Won second prize in “TRUSS THRESHOLD” event in AUTOMEET 2k18 at Madras Institute of Technology.

Won first prize in “MECH MINDZ” event in TORQ 2k18 at Loyola Icam College of Engineering and Technology.

Won third prize in “GLEEMING GLIDER” event in DETONA 2k18 at Easwari Engineering College.

Won second prize in “MECH-O-FIX” event in TECHNOSUMMIT 2k18 at Sathyabama institute of science and technology.

Won first prize in “MODEL MAKING” event in INTRA DEPARTMENT SYMPOSIUM 2k17 at St.Joseph’s Institute of Technology.

Won second prize in “WATER ROCKETRY” event in INTRA DEPARTMENT SYMPOSIUM 2k17 at St.Joseph’s Institute of Technology.

Won second prize in “WATER ROCKETRY” event in INTRA DEPARTMENT SYMPOSIUM 2k18 at St.Joseph’s Institute of Technology.

Won first prize in “ARRESTO MOMENTUM” event in YANTRA 2k17 at Meenakshi Sundararajan Engineering College.

Won second prize in “HYDRO ROCKETRY” event in YANTRA 2k17 at Meenakshi Sundararajan Engineering College.

Won second prize in “MR.Machinist” event in SWIVEL 2k18 at MNM Jain Engineering College. Certifications

Certified in Basics of Automation course by MSME in CDCE automation.

Certified in Business English Certificate in Cambridge English language assessment with B1 level.

Certified in CNC Programming, 3D Printing and GD&T course in CAD School. In Plant training

Titanium Tantalum Products Limited, Gowrivakkam 21/05/2018-26/05/2018

.

Learned about the manufacturing process of various metal parts such as pipes, fittings, pump and blower sparer

Co-curricular Activities

Served as the Department Representative for Robot club in the St.Joseph’s Institute of Technology.

Coordinator in IMPULZ-2k18 - One day National level technical symposium, conducted by St.Joseph’s Institute of Technology

Organized “Water rocketry” in IMPULZ 2K18 - One day National level technical symposium, conducted by St.Joseph’s Institute of Technology.

Organized “Water rocketry” in IMPULZ 2K17 - One day National level technical symposium, conducted by St.Joseph’s Institute of Technology.

Activities and Interests

Sports : Chess, Carrom

Reading books

Languages

English : Professional

Tamil : Professional

I hereby declare that all the information furnished above are correct and trust worthy to the best of my knowledge.

Place : Chennai Yours Sincerely,

Date : Balasubramaniyam K

Achievements

Won third prize with cash award of Rs 10000 in “COIMBATORE SCIENCE & TECHNOLOGY FESTIVEL” for my project “ECO FRIENDLY WELDING BY HYDROGEN FUEL CELL” at Codisia Trade Fair Complex, COIMBATORE.

Presented project in IEEE Project Expo 2019 at Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya Kanchipuram

Won second prize in “Project presentation” event in MECHAMORPHIS 2k18 at KCG college of technology

Honored as a Achiever for having won the place in the Inter-Collegiate Curricular competitions held at various levels in the year 2017-2018

Honored on Achievers day 2019 in the appreciation of co-curricular activities.

Participated and won numerous prizes in national level Technical symposiums conducted by various colleges in Tamil Nadu

Contact this candidate