Name : Akash Deep Khanna C/O Mr.
Father s Name : Late Sh. M. L. Khanna
Date of Birth : 25May, 1973
Postal Address : H.No.112, Nizatam Nagar,
Near Union Bank of India
Email : firstname.lastname@example.org
Education Qualification :
Work Experience :
Present Employer : ADNOC DRILLING,ABU DHABI
Duration : JANUARY 2019 TILL NOW
Designation : Chief electrician
Present Employer :Dalma energy,oman
Duration :August 2015 to December 2018
Designation : Chief electrician
Employer : Sun drilling,Kazakhstan
Duration : Nov2013 To august 2015
Designation : Senior Electrician
Previous Employer : Shivani drilling
Duration : DEC 2008 TO OCT 2013
Designation : SENIOR ELECTRICIAN
Employer :Mudra Lifestyle Ltd.,BOISAR,MUMBAI
Duration :FEB 2007 TO NOV 2008
Designation :Chief Engineer
Duration : From 28th September 1999 to January 2007
Designation : AGM
Employer : JCT Ltd., G.T. Road, Pagwara
Dist: Kapurthala, Punjab (India)
Duration : From 21st May, 1997 to September 1999
Designation : Asst. Engineer (Electronics Dept.)
Employer : Mahavir Spinning Mills Ltd.
NATURE OF WORK
Preventive maintenance activities like repair, test, troubleshoot installation and connection of power appliance, switchgear,S.C.R testing, Rig related MUD PUMPS,DRAW WORKS,TOP DRIVE,BAYLOR BRAKE SYSTEMS, A.V.R, VFD Etc., heaters, transformer, electrical motors, over head crane and electrical sub system like U.P.S systems and Battery chargers Generators, Alternators and Electrical, electronic, pneumatic and Hydraulic control systems. Other related devices AC drives (VFD), motor manager system, electronic circuit board, testing transistor (PNP, NPN, UJT, Diode) and lighting circuits, master drives, MCC, STAR, DELTA, reverse forward, DOL, power distribution, speed drives, Variable Frequency Drives, variable speed motor controllers, control panels, ACB, (MERLIN GERIN) VCB, OCB MCC Breakers, Transformers, and Generators and familiar feeder management really.
Maintenance of AC, H.V / L.V motors, AC motor starter controls electrical equipments, installation of H.V / L.V panels, cable laying, glanding, termination, system earthling, operation and maintenance of emergency diesel generators.
Knowledge on HV, LV, electrical panels, instrument panel testing and faultfinding
Carrying all routing check up, preventive maintenance (3.3 Kv up to 11Kvmotor) troubleshooting and repair of LT & HT switch gear and feeder management relay testing IR test and cable pulling work.
Routine test and preventive maintenance of emergency generators and synchronizing (Caterpillar, Cummins) and routing check up transformers testing procedure and daily inspection data logging etc.
PLC Control of ALLEN BREDLEY, SIEMENS, GE Fanuc Instrument Control Panel, Electric Control Panel, Loop Checking, and having knowledge of Digital and Analog circuit. Interface with personal assigned to process control and maintain all facility main power generation, distribution and utilization systems. PLC Programming. Etc.
Completed maintenance work activities; permit to work policies, isolation and desolation procedure with lock out.
Involved in external lighting layout, wiring, termination and connection of supply panel according to drawing and external lighting fixture work.
Attending on –call Duties individually.
Maintenance of A/C system for routine, preventive and breakdown maintenance of HVAC equipment Systems like Spilt units (In & Out door), package units, chillers,stuchwell system air handling units, (AHU, FCU), Co-ordinate & supervise maintenance contractor’s work.
Control panel testing and fault finding according to the Control Circuit drawing like, termination details & Trouble Shooting related to Electrical Fault Finding, Relay Logic, ladder Logic, testing & commissioning.
Carry out other similar or relatives duties such as mantling tools and equipment in a service cable condition, practicing good house keeping in the workshop and onsite.
Working with Maximum and conversant with permit to work system.
Experienced with test equipments Megger, Multimeter, clinometers, hip tester, hydrometer, CT& PT test &. Transformer oil test etc
Personally involved in loop checks function checks and field DCS-PLC for all types field Instruments and having ability to follow interface layer.
Knowledge of pressure, temperature, flow, level transmitters, flow switch, limit switches, R.t.d, Thermocouple,
Pyrometers, flow meter, MOV, ladder logic, relay logic, Gate logic and P & I D.
Dismantling and reassembling of generator,inspection of stator and rotor windings as per the schedule.
Preventive and Break down maintenance of Mud pumps, Draw works, Elmagco, motor controls and pneumatic control of valves through PLC.
Maintenance, Repair,Testing and trouble shooting of electronic equipments.
Operation, maintenance, Repair, Testing and trouble shooting, modification & up
20 & 10 Ton BOILER,WTP,ETP & ALL UTILITIES
Regular and preventing maintenance
To make standard operation procedures and maintenance standard for machines.
To investigate electronic procedures and maintenance standard for machines.
To provide technical support in case of breakdown and minimizing the breakdown time.
In case of breakdown, supervising the maintenance job and Coordinating with concerned department.
Development of maintenance standards, schedules and programmes and guidance to maintenance technicians and machine operators.
To maintain and implement quality standard ISO 9002 in the organization
To maintain maintenance record.
To calibrate, adjust and install electronics process controlling equipments.
Supervise, monitor, inspect and participation in installation, testing, trouble shooting and commissioning.
Testing and analysis of components and material to determine their performance.
Reading and interpreting engineering drawings/circuit diagrams and specification of components as per Indian and International Standards.
To manage shift independently.
Shift Scheduling, manpower planning, supervision and training to subordinate staff.
Preparation of schedule reports, estimate, costing and budgeting.
To look after safety measurement.
Technical Instruments Handled:
1)Worked on Rigs ZJ40 and ZJ 70 with BPM Top drives of Siemens Drives and Siemens PLC Of S7 300 series.
2)Plant monitoring and controlled by DCS system Electronic power Design (OP37).
3)Maintenance of SCR controls, GE make, Top Drive – BPM.
4)Maintenance of VFD panel with ABB 800 drives for mud pumps, Rotary and Drawbox.
5)Motors and Starter Controls, Panel boards, MCC, AC motors, DOL, star Delta Starters, cable laying glanding and termination.
6)Wiring of all Siemens PLC Siematic S7 300 series can easily read from any drawing and find out the faults of any short circuit or wire open and refed the program from CPU.
7)7)Drives:Make:ABB-ACS-550,800 SERIES,ALIVAR,SIEMENS POWER 240,DELTA VFD B SERIES,DANFOSSYS DRIVES,ALLAN BRADLEY,LENZE MAKE,KEB,ETC
8)PLC’s of Siemens Simatic series S7 100,100U,300U series, Delta, Allan Bradley and Lenze .
9)Worked on all types of encoders and resolvers with 5,8,12 wires.
10)Flow meters of ENDRESS & HAUSER to see the flow of water or chemicals in the line. Programming of them.
11)Temperature controllers both PT 100 & Thermocouple sensors of Select, APU enterprises and Semitronic.
12)Worked on 33kv, 11kv with transformers handled SF6, ABB and Siemens Breakers.
13)Maintenance and breakdown handling of 2 Ton BOILERS in case of any sparking problem or any other problem.
14)Maintenance and breakdown handling of 400kw VOLVO Penta DG sets in case of any voltage fluctuations or frequency variation problems.
15)Maintenance and breakdown handling of 800Kw DG.
16)At present working on KERUI 1000hp rigs with NOV top drive.
17)Working on Caterpillar 3512B 1045 KW GENERATORS.
Drilling Contract Execution
1)Sound knowledge on basic rig operations & troubleshooting electrical oriented problems.
2)Specialized in providing electrical system installation to the plant during and after the Rig moves .
3)Work in close coordination with the Inventory and ensure that materials received are in accordance with the right quantity & to the scheduled time.
4) Well exposed to Variable Frequency Drive(VFD).
Comprehensive experience in repair, maintenance, Trouble Shooting and installation of SCR's, VFD's,PLC's, High, Medium, Low Voltage Switch, Generators and Transformers, AC MOTOR control, Electromagnetic Controls and Sensors, Pneumatic / Hydraulic Controls, AC Generators, Air Conditioning & Refrigeration and Good Knowledge in Schematic drawings Controls and Power Diagrams.
Written reports on Safety, Equipment Failure, Maintenance Routines to Manufactures Standards, Surveys and Inspections, Daily Work Schedules, Modifications and Upgrades
certificate courses / Trainings
ATTENDED 28 DAYS TRAINING COURSE FOR SIEMENS 200,300 SERIES PLC AND ABB PLC.
(Akash Deep Khanna)