Engineer Power
Resume:
Resume of Ravikumar K T Page * of *
RAVIKUMAR K T Mailing Address:-
Testing Engineer Nandagokula Nilaya, #17/1, 2nd Main, E-mail : *********@*****.*** 14th B-Cross, Agrahara Dasarahalli, Mobile No : +91-810******* Bengaluru-560079
Carrier Objective:-
Seeking a promising career that provides an opportunity to enhance my skills constructively in line with organization goals in the field of PCBA Testing and ATE Testing. Professional Summary:-
A competent professional with 3.6 years of experience in PCBA TESTING and ATE TESTING.
All non-linear measurements have been observed like Noise figure, P1dB, harmonics, Spurious, Gain, Tx Power, Normal Mode Power, Isolations and Phase Shift etc.
Worked on the testing of hardware like, Power Amplifier, OTRM, QTRM, Up/down converter, TRG module level testing using ATE.
Characterize the performance of RF modules in the lab using Vector Network Analyser, Oscilloscopes, Vector Signal Generators, and Spectrum analyser.
Coordinated with SMT Engineers for Component placement and layout of PCB.
Good knowledge in Inspecting a PCBA’S and co-ordinate with QA Engineer.
Creating COC, PO, Dispatch Note, FQA, FAI, Work instructions, BOM.
Work with product engineers, RF experts and other test engineers to develop the test strategies to meet quality standards
Responsible for component selection and Ability to resolve PCBA repair rework.
Testing & optimizing various Products passive and active devices such a power supply, RF Transmission and Receive paths.
To Develop ATE Test jig based on the ATE input and output parameters.
To derived on test jig based on UUT specifications. i.e. Module Output power, input power, gain and TRM parameters.
Develop on jig specification of mechanical fabrication to match module connectors properly. Resume of Ravikumar K T Page 2 of 3
Usage of equipment and instruments to developing jig for ATE is a 1:16 power divider, 30 dB Attenuators, Isolators, RF couplers and RF connectors connectors.
Support technicians with troubleshooting and program meetings in developing root cause and corrective actions.
Work closely with other RF engineers and baseband algorithms engineers to optimize the overall wireless communication system performance.
Working with manufacturing and product development engineers for yield improvements and test time reduction.
Communicating with customer for understanding their requirements and Facilitation inspection and Testing of new products as well as components before starting testing. Equipment's Handling:-
Handle of various RF testing equipment’s, Rohde & Schwarz MXA Signal Analyzer (N9000B), Keysight Spectrum Analyzers, R&S Spectrum Analyzers, Agilent Signal Generators, Keysight Network Analyzers (5222A), Noise Figure Analyzer (Keysight N8975A), Noise Source (N4002A) Power Meters (R&S NPR-Z81), Oscilloscope (Tektronix TDS3011B, TD3045B), Programmable Power Supply (4 Channel), programmable Digital Multimeter and Various RF measuring instruments.
Work Experience: -
Presently Working as Testing Engineer in DCX Cables Assemblies Pvt Ltd, Bengaluru From January 2018 to Present.
1 Year 11 Months worked as a Testing Engineer in Bharat Electronics Limited, Bengaluru, From Feb 2016 to Jan 2018.
Experience Summary: -
Company : DCX Cables Assemblies Pvt Ltd, Bengaluru, Designation : Testing Engineer
Project : TRG (Transmitting Receiving Module).
Description:
The TRG consist of 16 independent Channels at the TX I/P and RX O/P. The TRG Consists of 5 PCBA’S Integration modules they are ORXU, IF, TR, DTR and LVPS. The Operating frequency is 3.1 to 3.5GHz. The gain of TRG module is 50 to 65 dB, the TX o/p power is greater than 42 dBm, control signals for TRG module are generated on board FPGA. Resume of Ravikumar K T Page 3 of 3
Experience Summary:-
Company : Bharat Electronics Limited, Bengaluru,
Designation : Testing Engineer
Project : X-QTRM(X- band Quad Transmit and Receive Module). Description:
The Quad Transmit and Receive Module Consists of four Independent T/R Module with 1:4 splitter / combiner at the Tx I/P Rx O/P. QTRM essential elements for the construction of Active Phased Array Antennas with a broad range of applications for Radars communication and electronic warfare systems. The main role of QTRM is to amplify the both Transmit and Receive Signals. The operating frequency of X-band (10-10.5 GHZ). Given Input power is 8dbm and Output power is 26 dBm. The gain of the QTRM is 18 dB, also controls Six-bit phase shift and Attenuator. The control signals for QTRM are generated b on board FPGA. Educational Qualifications: -
B E (Electronics & Communication) form Government Engineering College Hassan, VTU with 68.16% Duration (2011-2015).
PUC from AES National College, Gauribidanur with 60% Duration (2009-2011).
SSLC from Sri Maruthi Progressive high School, Gauribidanur with 72.16%. Personal Profile:-
Nationality : Indian
Date of Birth : May 26, 1993
Sex : Male
Marital Status : Single
Permanent Address : Katanakallu Village, Nakalahalli Post, Gauribidanur Taluk, Chikkaballapura-561208,
Declaration: -
I hereby declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.
(Ravikumar K T)
Contact this candidate