Engineer Quality

Jefferson G. Manalo

Sitio Sto. Nino, Banga, Talisay, Batangas

+639*********, 043-*******, +601********

*********@*****.*** and or *********@*****.***

SUMMARY OF QUALIFICATIONS:

Effective in quality assurance and quality control management.

Highly educated in technical and engineering field and able to do problem analysis and come up with solutions and countermeasures using the necessary problem solving tools.

Technically inclined with engineering works and design interpretation.

Strong communication skills with my co-workers particularly with customers locally and abroad.

Trained at Statistical Process Control and can work hands on in relation with product performance and quality.

Can directly handle aluminum die casting and machining production for process, engineering and quality system.

Represents the company for business related meetings whereas production, engineering and quality system is involved.

Leads the operation team for improvement plan implementation for defects encountered on the production line.

Performs the supplier and vendor audit to help ensure quality system also being followed based on our requirement.

PROFESSIONAL EXPERIENCE:

ENG TEKNOLOGI SDN BHD Machining and Die Casting Plant (Penang Malaysia)

Operations Manager January 2018 up to present

Fully responsible to ensure all department related to operation are all directed to over-all company Quality Objectives with the guidance of the Key Performance Indicators supported by their bottom line Key Result Areas.

Directly handles the Process Engineering Department to ensure all the yield improvement activities, troubleshooting and cost savings program will be handled efficiently and effectively.

Jefferson G. Manalo

Page 2

Communicates directly with external parties majority with customer New Product Introduction and ensures the parties involved will participate in the review until DFM discussion, sample submission and turning to mass production.

Participate in the problem solving analysis and develops system improvement necessary to ensure the whole organization works according to targets.

Engaged in developing new suppliers which treated as partners to ensure a cost competitiveness and balancing will always be priority without sacrificing quality.

Ensure the continuous development of people that will participate and contribute to the organization’s growth as well as their career enhancement activity.

Spearhead the organization on moving to automation process, ensuring cost effectiveness will always be considered and labor dependency will be improved.

(projects such as robotic spraying in die casting, robotic deburring process and machining auto-loading concept by use of fixtures and robots combined together)

Participate in the customer business reviews locally and overseas to ensure a good working partnership in between two parties.

Ensures a comprehensive and accurate reporting of operational performance to the management team in particular with the objectives set and continuous improvement activities.

ENG TEKNOLOGI SDN BHD (Penang Malaysia)

Quality Assurance Manager July 2013 up to December 2017

Fully handles quality assurance department and ensures the whole group is being driven by designed Key Performance Indicators supported with the Key Result Area of each of the section.

Conducts the full review of the New Product Introduction requirement and translates to the whole team which regards to the full compliance and FA package completion.

Spearheads the whole operation group in terms of driving improvement activities with the use of all the needed quality data.

Handles the Casting Production (separate plant) quality and ensures complies to standard set required by Machining production.

Provides review of Casting Molds especially with the standardization to ensure the least possible failure along the production.

Continuously provides training and development to all the people under the whole department to maintain awareness and ensure competency especially with the developing manufacturing.

Jefferson G. Manalo

Page 3

ENGTEK PRECISION PHILIPPINES INCORPORATED

Quality Assurance Assistant Manager August 2009 to July 2013

Ensures quality assurance and quality control system is being enforced and followed within the company with reference to standards.

Reports to management scrap trend and responsibly spearheads the improvement needed for top defects and line failures.

Involve in reviews and approval for cost reduction activities through lean approach.

Handles First Article team under QA and continuously communicates with supplier to customer until approval for mass production.

Ensures manpower allocation is aligned to current production requirement.

Directly leads calibration section and responsible for IMTE purchases and maintenance.

Delegates the company in support for solving issues at customer side and quality meetings.

Dates of Departure and Arrival

April 6, 2010 to April 9, 2010

April24, 2010 to April 30, 2010

Senior Quality Assurance Engineer Jan 2008 to July 2009

From Jan 2008 up to present, assigned to responsibly handle all Outgoing Quality Assurance concerns for all milling products at EPPI.

Directly communicates and coordinates with all our customers related to EPPI Milling Section.

Responsible with milling products’ continuous improvement and to value engineering’s proposals.

Attends to customer quality meetings and visit in Thailand.

Dates of Departure and Arrival

October 15, 2008 to October 18, 2008

February 11, 2009 to February 14, 2009

Production Quality Assurance Engineer Jan 2005 to Dec 2007

From 2005 to 2007, working as Outgoing Quality Assurance Engineer connected with Fujitsu Computer Product Corporation of the Philippines and Totoku Thailand for hard disk drive mechanical components parts.

Responsible with product quality and management going to end user/customer.

Jefferson G. Manalo

Page 4

Able to represent in behalf of the company for any customer requirement particularly in terms of product improvement, evaluations and proposals.

Improved effective customer relationship and able to get more projects in addition to existing models.

Traveled to Thailand to represent the company for product quality meetings and customer invitation.

Dates of Departure and Arrival

January 22, 2006 to January 28, 2006

May 7, 2006 to May 11, 2006

April 5, 2006 to April 9, 2006

July 12, 2006 to July 16, 2006

December 4, 2006 to December 9, 2006

January 19, 2007 to January 26, 2007

March 21, 2007 to April 2, 2007

August 15, 2007 to August 19, 2007

In-Process Quality Control and Quality Assurance Engineer Jul 2003 to Dec 2004

Responsible for the First Article approval and product maintenance of hard disk base plate for FCPP 3.5 inch hard disk drive model.

Maintained the Nidec Philippines 2.5 inch hard disk drive base plate in-process controls until product’s end of life

Effectively established and maintained product’s in-process quality for Nidec Copal Philippines SSA-31 Yoke Top as part of hard disk drive component.

Able to maintain the zero dimension defect from 2004 to 2005 for Fujitsu Computer Products Corporation of the Philippines Spoiler Models.

Provided the In-process Control Standards statistically based both FCPP (presently named as Toshiba Storage Devices of the Phils.) and Nidec Philippines Products.

Related Trainings and Seminars:

Basic Leadership Training (September 20, 2003)

Kaizen Quality Circle and 7 QC Tools (December 13, 2003)

Statistical Process Control - Level 1 (February 20, 2004)

Global 8D Methodology Training (September 11, 2004)

Rainbow Life at Work (November 6~7, 2004)

Basic Supervisory Course (January 8, 2005)

Statistical Process Control Light and Minitab (May 11~12, 2005)

Basic Microsoft Project Training (October 21, 2005)

Passion for Excellence (November 4~5, 2006)

Basic Supervisory Training - Passion for Excellence II (April 21, 2007)

EPPI’s Certification to ISO 14001:2004 (EMS) (September 14, 2007)

Jefferson G. Manalo

Page 5

Autocad Training (October 26~27, 2007)

ISO / TS 16949 Internal Audit (November 24, 2007)

APQP / PPAP Training (March 1, 2008)

Cost of Quality (September 26, 2008)

EMS Auditor’s Refresher Course (May 9, 2008)

Tact Time Law (October 28, 2008)

Loss Control Management (November 14, 2009)

EDUCATION:

Bachelor of Science in Mechanical Engineering – Technological University of the Philippines.

Diploma in Mechanical and Production Engineering Technology – Technological University of the Philippines

oScholarship grantee from the Department of Science and Technology (DOST), a three (3) year technology course.

Contact this candidate