Tamilmaran Thamizhazhagan

Email: ada9hy@r.postjobfree.com

Link IN: www.linkedin.com/in/thamizh-marant

Current Location: Dubai, UAE.

Visa Status: Visit Visa Valid until March 10th 2020 Phone No: +971-********

PIPING DESIGN ENGINEER / PDMS&E3D ADMINISTRATOR

To secure position of the Piping Design Engineer in a reputed engineering firm where the sound technical experience and prowess in Design & Detail Engineering can help in executing projects at a faster pace through reduced cost and time by work as individual or team with proven leadership & communication skills and innovative. KEY SKILLS

Including but not limited to:

Familiar at Pipe routing, Equipment’s, Structures and steelwork & Pipe supports modeling in PDMS&E3D.

Troubleshooting, Project setup, Backup Activity, Administration involving Teams, users, DBs, Access control rights (ACR) given, MDS & ADP in PDMS.

Familiar at PDMS Paragon Module and Building of 3D Catalogue piping items to include valves, bulk items, special design items and instruments and Generations of 3D Catalogues and 3D specifications for piping in PDMS as per the PMS&VMS.

Preparation of Plant & equipment Layout, Piping GA, Support detailing, Isometric checking with good engineering practice & Standards.

Extracting piping, equipment and support GAD’s by using PDMS DRAFT module.

Transfer specifications and catalogues within various projects in PDMS.

Pipe support span calculation for pipes with various materials and pipe wall thickness calculation, Piping stress analyzing concepts and HAZOP/HAZID study.

Conversant with international codes such as ASME, ANSI, API & DIN, etc..,

Report customization for piping in Design Module (PDMS) and cross check it with the piping manual specifications and line list.

Report customization for piping in Paragon Module (PDMS) and cross check it with the PMS and VMS.

3D Specification and 3D catalogue updation in PDMS as per latest revisions.

Reports customization as per the project requirements and extracting MTO for piping and supports.

Model Reviewing 30%, 60 %, 90% using Navisworks freedom and Resolving modeling comments and updating the 3D model.

Extraction of Clash reports and cross check with model and update.

Assigning user defined attributes (UDA) for various PDMS module.

Preparation of Backing sheet and isometric set up for Isometric generation for various projects.

Extracting Isometric drawing for piping and cross check it with P&ID and update the model.

Basic understanding in programmable macro language (PML) and PML programming.

Data analysis and data interpretation by Advanced Excel and VBA.

Good knowledge and experience in ERP and software SAP ERP.

Design & Detail engineering with fundamental engineering concepts, Feasibility study and Project documentation.

SOFTWARE SKILLS

PDMS(Administration, Design, Paragon, Specon, Lexicon, Draft &Isodraft)

E3D Ceaser-II (primary level)

Solid Works Auto CAD-2D&3D

MS Office

Navisworks manager & freedom

Windows operating system

SAP ERP

MEMBERSHIP AND CERTIFICATION

AUTOCAD - certified by AUTODESK

Member - Indian Welding Society (IWS)

PROFESSIONAL EXPERIENCE

Company : PROJECKTENGAGEMANG, Chennai, India.

Position : Piping Design Engineer

Period of time: Jun 2019 – Dec 2019 SOFTWARE: PDMS 12.1 SP2 Project :Cirebon 2, 1x1000MW Coal Fired Power Plant Project, Indonesia.

To Provide Complete PDMS 3D modeling of Water Treatment plant including Equipment’s, piping, structure,Civil, Electrical& Instrumentation work for the 1x1000mw coal fired power plant Indonesia. Duties & Responsibilities:

Piping components 3D catalogue creation and valve catalogue creation in PDMS as per the project requirements and discuss with the clients.

Pipe wall thickness calculations and cross check with the inputs.

Co-ordinate with the design team and issue clearance while modeling and problem solving.

Pipe support catalogue creation and update at required specification.

Creation of Vendor 3D catalogues such as GRP,GRE,PVC,CPVC pipe & items in PDMS.

Specification generation for 3D modeling of piping as per the PMS and VMS of the project.

Specification updation in paragon module as per latest PMS.

Large and small bore Pipe routing as per the P&ID.

Support modeling for various pipes and stress lines.

Equipment’s updated at the model as per the latest GA’s.

Report generation of specification and cross check with the latest PMS.

UDA creation and isometric setup for this project.

Extracting MTO and detail engineering outputs for deliverables.

Extracting drawing of BOP and TOP of pipes.

Extracting Isometrics and cross check it with P&ID and updating model.

Extracting BOQ and BOM of piping and components for the project deliverables. Period of time: Feb 2019 – May 2019 SOFTWARE: PDMS 12.1 SP4 Project : DM –V PLANT & SWRO-II DESALINATION PLANT

To Provide Complete PDMS 3D modeling of Water Treatment plant including Equipment’s, piping,Structure, Civil, Electrical Instrumentation work for The Visakh Refinery Modernization project (HPCL). Duties & Responsibilities:

Piping components 3D catalogue creation and valve catalogue creation in PDMS as per the projectrequirements and instrument catalogue creation.

Co-ordinate with the design team and issue clearance while modeling and problem solving.

Pipe support catalogue creation and adding at required specification.

Creation of Vendor 3D catalogues such as GRP,CPVC pipe & items in PDMS.

Specification generation for 3D modeling of piping as per the PMS and VMS of the project.

Report generation of specification and cross check with the latest PMS.

Discussion with the client and specification updation in paragon module as per the project requirements. Period of time: Sep 2018 –Jan 2019 SOFTWARE: PDMS 12.0 SP6 Project : Utkal alumina refineries expansion (1.5 MTPA to 2.0 MTPA)

Utkal Alumina International Limited (UAIL) is a green field alumina refinery located at Doraguda,RayagadaDistrict, Odisha. An interim capacity expansion by 0.5 MTPA taking the plant size to 2.0 MTPA is in the scope this project.

Duties & Responsibilities:

Piping components 3D catalogue creation and valve catalogue creation in PDMS as per the project requirements and discuss with clients.

Co-ordinate with the design team and issue clearance while modeling and problem solving.

Creation of Vendor 3D catalogues such as GRP,CPVC and PP(Poly propylene) lined pipe & items in PDMS.

Specification generation for 3D modeling of piping as per the PMS and VMS of the project.

Equipment modeling as per the vendor GA drawing.

Specification updation For Piping in design module for 60% model submission.

Specification updation in paragon module as per the project requirements. Company : PROJECKTENGAGEMANG, Chennai, India.

Position : Graduate Engineering Trainee (GET) Period of time: Jun 2018 – Sep 2018 Duties & Responsibilities:

Understand the scope of various project and create PDMS database structures that will enable 3D design and subsequent creation of deliverables from the project.

Hands on experience in catalogue creation of various piping components for various project requirements.

Pipe routing as per the P&ID and Equipment modeling as per the Equip GA’s and pipe support modeling.

Project set-up, administration and user support for AVEVA PDMS for various projects.

Follow up the tasks and finish up before on time and co-ordinate with in team and discussing ideas about the piping and structure modeling.

Attending Personal development and skill development programs. ACADEMIC CREDENTIALS

Bachelor of Mechanical Engineering Graduated, June 2018 Coimbatore Institute of Technology (CIT)

Affiliated by Anna University,Coimbatore, India

Diploma in Mechanical Engineering Completed, June 2015 Varatharajan Polytechnic College

Directorate of Technical Education, Perambalur, India. PROJECTS WHILE ACADEMIC

Design of agricultural seedbed preparation by utilizing integrated tiller mechanism(2018)

The integrated design of agricultural tiller mechanism of combining different type of cultivators using by3DModeling software Solid works and analysis the various types of dynamic and static forces acted on the design model.

Fabrication of Multi nut Engagement and Disengagement system(2017)

Spur gear arrangement that engage/disengage multi nuts at the same time. Further integration can be applicable by Automate the process.

PERSONAL DETAILS

Date of Birth : 10th June 1997

Passport no : R7403049 (Valid till 2027)

Language known : English, Tamil and Malayalam

Hobbies : Reading, Art & Outdoor games

Contact this candidate