*-******** ****

Full Name

Gender

Date Of Birth

Place Of Birth

Nationality

Address

Country

Current location

Marital Status

Military Status

Experience

Contact number

Email address

Skype ID

Driving license

Mohamed abd Elkader haikal

Male

24/02/1981

Behaira -Egypt

Egyptian

Kom Hamada,behaira, Egypt

Egypt

Egypt

Married

Finished

+10 years

+201*********

ada9dg@r.postjobfree.com

Alpha.ahmed2

Egypt/Saudi Arabia

2-Education

University Degree

Dept.

Graduation Project

Project Grade

Graduation Grade

Graduation Year

Spoken Languages

-B.Sc. Engineering / Tanta university

-Electronic & Communication engineering

-Antenna arrays in radar system

-Excellent

-Good (73.46 %)

-2004

-Arabic - Degree: Excellent / English - Degree: Very Good

3-Work Experience

Period

Position

Company

Project

Work Responsibilities

From Oct 2018 to Nov 2018

Commissioning DCS operator

LOTTE E&C – Indonesia Power

Grati CCPP (PEAKER)Extension 450 MW, Indonesia

- To control and operate safely and efficiently 2*150 MW insaldo gas turbines “ABB Control System" - with Air Cooled generators

- to control and operate 150 MW Skoda steam turbines with “ZAT Control System", for reliability test

Involve by 2*GE HRSG with water cooled condenser and all of combined cycle auxiliaries (Netmation control system).

-monitor desalination plant that produced 40 t/h

1. Provide support to the operations team for any kind of operation such as unit start up / unit shut down / unit cool down / decision making during operation.

2.Support the operations team with the PTW process.

3.Support the operations team in recovering the unit during turbine trips

a)Support the operations procedures to the Operations Manager.

b)Support the corrective maintenance when required. Act in emergency situations.

c)Support the creation of the QMS regarding the work procedure and instructions for the operations tasks.

d)Lead the possible plant improvements from the operations point of view.

Act as bridge for the Engineering support coming from client or other vendors

In case of occurrence of any troubles such as a forced outage the Instrumentation and Control Engineer shall:

1.Attend the location of the trouble immediately.

2.Investigate the cause of trouble and raise a non conformity or observation report as required.

3.Report the result of the investigation with sufficient data to appropriate sections of the Contractor, and notify the Owner.

3.Establish necessary countermeasures for the trouble in cooperation with the appropriate sections of the Contractor, which includes dispatch of Technical Advisers to site, preparation of procedures, schedule for remedial work, supply of necessary parts to carry out the countermeasures. Staff

* Provide regular OJT to the Customer Maintenance Staff and Customer Operations.

*In case of occurrence of any troubles such as a forced outage the Instrumentation and Control Engineer shall:

1.Attend the location of the trouble immediately.

2.Investigate the cause of trouble and raise a non conformity or observation report as required.

3.Report the result of the investigation with sufficient data to appropriate sections of the Contractor, and notify the Owner.

4.Establish necessary countermeasures for the trouble in cooperation with the appropriate sections of the Contractor, which includes dispatch of Technical Advisers to site, preparation of procedures, schedule for remedial work, supply of necessary parts to carry out the countermeasures.

- Provide regular OJT to the Customer Maintenance Staff and Customer Operations staff.

-Communicate effectively with all levels of employees and project stakeholders

-Maintain the highest degree of honesty and integrity at all times

-Responsible to solve Customers technical problems.

-To participate at the identification and resolution of technical non conformities

-Any other duties as may be required in the scope of your role

Period

Position

Company

Project

Work Responsibilities

From Feb 2008 To present

operation Engineer

Middle delta for electricity production co.

Nubaria Combined cycle power plant, Egypt.

Control and operate safely and efficiently 4*250 MW Siemens gas turbines “T3000 Control System" - frame V94.3A with Air Cooled generators.

- to control and operate 2*250 MW Mitsubishi steam turbines with “DCS Control System",

Involve by 4*HRSG with water cooled condenser and all of combined cycle auxiliaries.

- Commissioning and operation for 2*250 MW GE gas turbines "mark vie control system”- frame MS9001FA.

- Carrying on the construction work of 1*250 MW - ALSTOM steam turbines by ALSTOM company, 2*HRSG by

STF company and all of combined cycle auxiliaries.

-1. Provide support to the operations team for any kind of operation such as unit start up / unit shut down / unit cool down / decision making during operation.

2.Support the operations team with the PTW process.

3.Support the operations team in recovering the unit during turbine trips

a)Support the operations procedures to the Operations Manager.

b)Support the corrective maintenance when required. Act in emergency situations.

c)Support the creation of the QMS regarding the work procedure and instructions for the operations tasks.

d)Lead the possible plant improvements from the operations point of view.

Act as bridge for the Engineering support coming from client or other vendors

*In case of occurrence of any troubles such as a forced outage the Instrumentation and Control Engineer shall:

1.Attend the location of the trouble immediately.

2.Investigate the cause of trouble and raise a non conformity or observation report as required.

3.Report the result of the investigation with sufficient data to appropriate sections of the Contractor, and notify the Owner.

4.Establish necessary countermeasures for the trouble in cooperation with the appropriate sections of the Contractor, which includes dispatch of Technical Advisers to site, preparation of procedures, schedule for remedial work, supply of necessary parts to carry out the countermeasures. Staff

* Provide regular OJT to the Customer Maintenance Staff and Customer Operations.

*In case of occurrence of any troubles such as a forced outage the Instrumentation and Control Engineer shall:1.Attend the location of the trouble immediately.

2.Investigate the cause of trouble and raise a non conformity or observation report as required.

3.Report the result of the investigation with sufficient data to appropriate sections of the Contractor, and notify the Owner.

4.Establish necessary countermeasures for the trouble in cooperation with the appropriate sections of the Contractor, which includes dispatch of Technical Advisers to site, preparation of procedures, schedule for remedial work, supply of necessary parts to carry out the countermeasures.

- Provide regular OJT to the Customer Maintenance Staff and Customer Operations staff.

-Communicate effectively with all levels of employees and project stakeholders

-Maintain the highest degree of honesty and integrity at all times

-Responsible to solve Customers technical problems.

-To participate at the identification and resolution of technical non conformities

-Any other duties as may be required in the scope of your role

Period

Position

Company

Project

Work Responsibilities

From March,2014 until March 2017

Commissioning & operation engineer

Saudi electricity company (SEC)

PP#12 Combined cycle power plant, Saudi Arabia

- To control and operate from DCS safely and efficiently 8*180MW GE gas turbines “Mark Vie Control System"- frame

MS7001FA .05 With hydrogen cooled generators, 8 ALSTOM HRSGs and 2*340MW ALSTOM STGs.

-1. Provide support to the operations team for any kind of operation such as unit start up / unit shut down / unit cool down / decision making during operation.

2.Support the operations team with the PTW process.

3.Support the operations team in recovering the unit during turbine trips

a)Support the operations procedures to the Operations Manager.

b)Support the corrective maintenance when required. Act in emergency situations.

c)Support the creation of the QMS regarding the work procedure and instructions for the operations tasks.

d)Lead the possible plant improvements from the operations point of view.

Act as bridge for the Engineering support coming from client or other vendors

In case of occurrence of any troubles such as a forced outage the Instrumentation and Control Engineer shall:

1.Attend the location of the trouble immediately.

2.Investigate the cause of trouble and raise a non conformity or observation report as required.

3.Report the result of the investigation with sufficient data to appropriate sections of the Contractor, and notify the Owner.

4.Establish necessary countermeasures for the trouble in cooperation with the appropriate sections of the Contractor, which includes dispatch of Technical Advisers to site, preparation of procedures, schedule for remedial work, supply of necessary parts to carry out the countermeasures. Staff

* Provide regular OJT to the Customer Maintenance Staff and Customer Operations.

*In case of occurrence of any troubles such as a forced outage the Instrumentation and Control Engineer shall:

1.Attend the location of the trouble immediately.

2.Investigate the cause of trouble and raise a non conformity or observation report as required.

3.Report the result of the investigation with sufficient data to appropriate sections of the Contractor, and notify the Owner.

4.Establish necessary countermeasures for the trouble in cooperation with the appropriate sections of the Contractor, which includes dispatch of Technical Advisers to site, preparation of procedures, schedule for remedial work, supply of necessary parts to carry out the countermeasures.

- Provide regular OJT to the Customer Maintenance Staff and Customer Operations staff.

-Communicate effectively with all levels of employees and project stakeholders

-Maintain the highest degree of honesty and integrity at all times

-Responsible to solve Customers technical problems.

-To participate at the identification and resolution of technical non conformities

-Any other duties as may be required in the scope of your role

4-ON shore training courses

From 12 Aug to 17 Aug 2017

Successfully completed the training about PTWO in Siemens permit to work system in Cairo New capital CCPP

By Siemens company.

From Dec 11 To Dec 24,2015

Successfully completed the operating training about CONRO STEAM for steam turbine and (BOP) balance of plant, by ALSTOM company training center in PP#12 training center.

From Feb.10 To Feb.23,2015

Successfully completed the operating training about GE MS7001FA0.5 gas turbine in PP#12 training center, Saudi Arabia.

the training course includes all data about GE gas turbine, startup & shutdown procedure, normal & emergency operation, trouble shooting, 13.8 kv switch gear, 480 v load center, generator & transformer protection and diesel generator.

From Sep. 05 To Sep. 9,2014

Successfully completed the operation of GE gas turbine training session in Alqquryah training center, Saudi Arabia.

The training course.

From Mar.01 To Apr,15,2008

Successfully completed a thermal power plant training session in Nubaria combined cycle power plant training center, the training includes all electric & mechanical information about all power plant types.

5-Skills & Interests

Qualifications Skills

- Experience in a leadership role within a power generation field.

- Focused, innovative, fast learner and an excellent team player.

- Accustomed to working under pressure, priority setting, and taking initiative and

Calculated risks.

- Proficiency with computer tools

- Ability to understand any new systems as fast as possible.

- Ambitious, patient, and hard worker.

- Ability to lead and motivate others within a team environment.

- Ability to read and interpret documents such as P&ID's, schematic diagrams, safety rules, commissioning

Books, operating and maintenance instructions and procedure manuals.

- Ability to write routine reports and correspondence. Should be able to read P&ID's.

- Strong communication & organizational skills.

Contact this candidate