Sign in

Civil and Structural Design Engineer

Daang Amaya II, Cavite, 4108, Philippines
December 28, 2019

Contact this candidate


Dear Sir / Madam,

I hope you are well and having a great day.

I’m writing to express my utmost interest in applying for the position as Civil & Structural Design Engineer. I am a self motivated Engineer with twenty two (22) years of combined experiences in Front End Engineering & Design (FEED), proposal, detailed engineering, drafting / design, and site / field support for industrial plant projects such as Oil and Gas, Refineries, Petrochemicals, Processing, Mining / Minerals, and Power / Electricity. I’ve been assigned to Fabrication shops for quality checking & monitoring consistency of fabrication drawings with the structural engineering drawings.

I am currently connected with


Fluor Daniel, Inc. Philippines. I have recently worked with


Arcadis (GEC,

Philippines) Consulting Middle East Ltd.,


Gulf Sky Cranes & Contracting Co. Ltd. Jubail, Saudi Arabia. I have also worked with EPC companies such as


GS East Asia Manila, Inc.,


Foster Wheeler Brunei /


Foster Wheeler



Fluor Daniel, Inc. Philippines,


Lycopodium Minerals Pty. Ltd. Western Australia,



Alumina Pty. Ltd. Western Australia, and


JGC Philippines, Inc. During the early stage of my Civil Engineering career, I was employed by local engineering firms such as


Mendoza Engineering, Inc. and


General Planners,

Engineers, Resource Consultant & Co. I also did some freelance engineering / designing/drafting jobs for an MRT extension project with


North Luzon Railways, Corporation.

My work experiences as a Civil / Structural Design Engineer mainly includes:


Preparation of design calculations

for steel / concrete / precast (non prestressed) structures such as piperacks, multi level equipment supports, shelters, miscellaneous pipe supports and platforms, as well as their connections and foundations utilizing engineering programs such as STAADPro, RISA3D, RISAFoundation, AFES, TEDDS, Limcon, SpaceGASS, and Strand7;


Preparation of material take off (MTO);


Preparation of structural layouts;


Quality checking of

engineering and fabrication drawings;


Coordination / performing plant 3D model quality / clash checking with Clients and other Disciplines utilizing programs such as SmartPlant Review (SPR) and NavisWorks;


Assigned at

site to assist the Construction Team to any changes in the design brought about by actual site condition or non conformance of subcontractors to the initial design. In addition, some companies I have worked with also required me to


Perform 3D structural modelling utilizing programs such as FrameWorks Plus, Bentley Triforma Structural, ProSteel 3D, and Tekla Structures; and,


Prepare / extract 2D engineering drawings from the 3D models utilizing programs such as MicroStation and AutoCAD. My knowledge in design, dedication to work, timely delivery of outputs, quick learning ability, wide range of program operation / know how, and constant practice of workplace etiquettes have been key factors for me to be recognized by my Supervisors, which led them to entrust me with handling / designing major structures, to be given a (Structural) Lead role and handle design works for sub areas of the project, and receive spotlight award for my contribution to the project.

Kindly refer attached latest CV for the details of my employment and the specifics of my duties / responsibilities. Thank you very much for taking time and consideration of my application. I am looking forward in hearing from you soon.

Yours sincerely,

Allan P. Mendoza

eMail : ; Mobile # : +63-949-******* ; +63-925-*******

Skype ID : Applicant_APMendoza

1 / 18


Contact Details in Philippines

Address : Block 5 - Lot 15, Retirees Village 2, Daang Amaya 1, Tanza, Cavite, Philippines, 4108.

Mobile Nos. : +63-949-*******


eMail :

Skype ID : Applicant_APMendoza

Career Objective

To work in a quality and output driven Engineering Firm, challenges its staff to come-up with technical solutions to engineering problems. Advancement in Civil / Structural Design Engineering through project involvement / execution, project (site) assignments, and training / support. Job Summary / Qualifications

Civil / Structural Design Engineer with a total of 22 years of experiences in preparing design calculations, detailed design drawings, and field assignment / site support for on-shore structures for Industrial Process Plants such as Oil & Gas (14 yrs), Mining / Mineral (6 yrs), and Power / Electricity (2 yrs). Experience includes being assigned to work at project sites (local and abroad: such as Malaysia, Thailand, Western Australia, Singapore, Brunei, and Saudi Arabia).

Structural Site Engineer (Bunbury, WA); Civil/Structural Designer (Perth, WA) with 5 years experiences in producing standards, detailed design and general arrangement drawings for Mining / Mineral Processing Plants. Worked in Singapore for a brown field Power Generation Plant Project. Then, transferred to the project site in Brunei to continue design engineering support services to Construction. Review of Client / Project / ITB (Invitation to Bid) documents & specifications for the preparation of BM (bill of materials) of structural items (steel members, bolts, painting, fireproofing, concrete, rebars, etc.) and earthworks (excavation, backfilling, disposal, forms, etc.) for use in Proposal Bids. Technical expertise with full range engineering and drafting software knowledge such as STAADPro, RISA3D, RISAFoundation, TEDDS, Limcon, AutoCAD, and Bentley MicroStation (2D, 3D). Also, use / develop design calculation spreadsheets (MS Excel, MathCAD).

Knowledge with Design / Construction Codes such as American Concrete Institute (ACI), American Institute of Steel Construction (AISC), National Structural Code of the Philippines (NSCP), National Building Code of the Philippines (NBCP), Uniform Building Code (UBC), American Society of Civil Engineers (ASCE), British Standard Structural Use of Concrete (BS8110), Australian Standard for Concrete Structures (AS3600), Australian Standard for Steel Structures & accessories (AS4100 & AS1657, respectively), and Eurocodes. Familiarity with some Plant Design and Engineering Practices due to work / project involvement such as Shell’s DEP v34, Aramco Standards, and Process Industry Practices (PIP). Onshore industrial plant structures handled includes major structures such as piperacks, pipe bridges, equipment structures, shelters, and their corresponding foundations. Minor structures includes pipe stanchions, portal frames, access / maintenance platforms, sleepers, pits / trenches, pumps, control room foundations, etc. 2 / 18

Professional Experience

Employer: Fluor Daniel (Philippines), Inc. (Jan. 2, 2019 ~ Present) 7th Floor, Polaris Corporate Center, Spectrum Midway, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines, 1781

Job Position:

Design Engineer IV

Duties / Responsibilities (Philippine Office):

1. Familiarization with the project specifications, standards, design codes, geotechnical report, meteorological and seismic design data, job directives/bulletins, and design softwares. 2. Prepare the structural layout based on 3D model from SmartPlant Review (SPR). 3. Initial calculation preparation as basis of 60% 3D model / review of the Firewater Pumphouse

(structure & foundation), Flare Derrick (flare stack foundation), and Liquid Burner (flare stack foundation). Utilizing RISA3D, RISAFoundation, and in-house developed spreadsheets (MathCAD & MS Excel) for the loadings and design of the structural components. 4. Coordination with flare derrick vendor (Zeeco). 5. Design of foundations (spread, mat, and piled foundation) taking into account the clashing avoidance with other foundations, civil structures (trenches, pits, sheet piles, etc.), and other Disciplines’ elements.

Project (Duration):

LNG Canada Project (LNGC) (September 2019~Present) Client(s): Joint Venture of Shell Canada Limited (40%), Petronas (25%), Mitsubishi Corporation (15%), Petro China Company (15%), and Korea Gas Corporation (5%),

Project Location: Kitimat, British Columbia, Canada Product: Liquefied Natural Gas.

3 / 18


Duties / Responsibilities (Philippine Office):

1. Familiarization of the Client’s (Gazprom) / project specifications, standards, geotechnical report, Russian codes (GOST, SNIP, & STO). Also, familiarization of the developed design spreadsheets for the project.

2. Prepare the structural layout based on 3D model from NavisWorks. 3. Calculation / preparation of the basic load cases (i.e. dead, operating, wind, seismic loads, etc.) for STAADPro input.

4. Prepare material take-off for Project Lead checking and evaluation. 5. Design of foundations (spread, mat, and piled foundation) taking into account the clashing avoidance with other foundations, civil structures (trenches, pits, sheet piles, etc.), and other Disciplines’ elements.

6. Prepare structural sketches for the designers / 3D modelers. 7. Checking of engineering drawings (steel structure, concrete / foundation, piling drawings). 8. Preparation of design calculations and supporting appendices, and initially send to “Translators” for the Russian interpretation of the document.

9. Submission / uploading of deliverables thru CoreWorx. (Also, retrieval of info / comments thru CoreWorx.)

10. Submit deliverables (calculations and eng’g drawings) as per agreed schedule, as site construction already started progressing.

11. Structures assigned (so far) for eng’g design are: Vertical vessel foundation on piles; Miscellaneous pipe supports & platforms, and; Additional piperacks. Project (Duration):

Amursky Gas Processing Plant (AGPP) (Jan 2019 ~ September 2019) Client: JSC Nipigaspererabotka

Contractor: China Petroleum Engineering & Construction Corporation (CPECC) Project Location: Svobodnensky District, Amur Region, Russia Product: Gas.

4 / 18

Employer: Arcadis Consulting Middle East Limited (May 28, 2018 ~ Jan. 01, 2019) 9th Floor, Tower 6789, Ayala Ave., Brgy. Bel-Air, Makati City, Philippines, 1209 Job Position:

Principal Structural Design Engineer (for Building Structures) Duties / Responsibilities (Philippine Office):

1. Coordination with counterpart at Lead Office (Arcadis, Sydney) regarding scope of work (SOW) packages ( construction phase support (CPS), design changes due to actual site condition / construction, request for information (RFI) ); deliverable outputs such as calculations and engineering / redline mark-up drawings; and schedule, through skype business and/or emails. 2. Prepare basis of design (BOD) for design engineers based on design information and coordination gathered from (Regional) Lead Office and material specifications required by the project. 3. Convey and discuss received design information to engineers / drafters. 4. Provide proposal structural layout and connection details (redline mark-up sketches / drawings) for getting Client acceptance.

5. Quality checking of deliverables (calculations and drawings). 6. Submit updated / new calculations and drawings in ProjectWise. 7. Monitor manhour spent by engineers & drafters. Provide Department Manager with weekly manhour and financial status report.

8. Attend and participate in the weekly project lead meeting to discuss manpower requirement and allocation.

9. Closely monitoring the work progress assigned to the design engineers and drafters/designers. Project (Duration):

Transport Access Program 3 Accelerated Projects (TAP 3AP) - for North Strathfield, Kingswood, & Glenbrook Train Stations (Dec 2018 ~ Jan 2019)

Client: Transport for New South Wales (TfNSW)

Project Location: Sydney, Australia

Product: Quality checking of 3D / Revit models and structural drawings for the above said train stations (steel & concrete drawings).

Sydney Metro - Barangaroo Station Stage 2 & 3 Project (Sep 2018 ~ Jan 2019) Client: Transport for New South Wales (TfNSW)

Project Location: Sydney, Australia

Product: Technical support to Regional Lead Office (Sydney, Australia) in preparing 3D / Revit models, structural drawings, and design calculations for Barangaroo Station packages: Over track exhaust (OTE) steel structure, vertical transport framing, balustrade design, cladding support, Northern-entry canopy, and (blockwork/) wall stiffener.

350 Wellington Road Project (Aug 2018 ~ Oct 2018) Client: Stockland Pty Ltd / RPD Partners

Project Location: Stockland Mulgrave Business Park, Victoria, Australia Product: Technical support to Regional Lead Office (Sydney, Australia) in preparing tender

(structural) drawings and associated design calculations for pedestrian link-bridge, ramp, stair, slab strengthening, and wall modification.

WestConnex M4 East Project (May 2018 ~ Aug 2018) Client: WCX M4 Pty Ltd

Project Location: Sydney, Australia

Product: Technical Support to Construction Team with regards to arising RFIs and NCRs

(Request for Information and Non-Conformance Report, respectively) at site: Paramatta Road Ventilation Facilities, Underwood Road Ventilation Facilities, and Cintra Park Ventilation Facilities.

5 / 18

Employer: Gulf Sky Cranes & Contractors Co. Ltd. (Apr. 18, 2017 ~ May 17, 2018) Street 118, 3rd Industrial Support Area, Jubail, Saudi Arabia, 35729. Job Position:

Civil / Structure Design Engineer

Duties / Responsibilities (Jubail, KSA Office):

1. Participate in GSCC’s accreditation application to Saudi Aramco and be accepted as one of their Subcontractors. Participation includes preparation of sample structural design calculations and standards

(steel structure and foundation) for presentation to Saudi Aramco, and, (successfully) answering technical queries during panel interview conducted by Saudi Aramco personnel upon their visit to GSCC. 2. Develop design spreadsheets (Excel) such as steel structure connections, based on AISC specification, detailing, manual, and design guides.

3. Develop Company checklists for steel structure calculation, foundation calculation, steel / concrete engineering drawings, 3D structural model, and fabrication drawing based on Saudi Aramco’s (prospect Client) engineering standards.

4. Assigned to design GSCC’s Painting Shop Building, a 14m wide x 24m long x 8.5m high, partially enclosed shelter. Conduct site survey for feasibility study and investigation of nearby existing structures for possible clashing / hindrances. To prepare structural design calculations and engineering drawings that will be submitted to the Royal Commission (Saudi Arabia government authority on land allocation and infrastructure). Prepare material take-off list. Check / issue fabrication drawings to Production Team. 5. Support to Fabrication / Production Team. Use of Columbus CAD / CAM nesting software for preparing

”mpg” files that will then be read by the CNC plate-cutting machine. 6. Assigned to do material handling works which includes: A)

Attend / get signatures / compile mat’l requests

forms prepared by Fabrication / Production Team,


Update / search in the Delivered Mat’l Summary List spreadsheet, the availability of the item in the stockyard, C)

Search in stockyard / laydown areas for the

specific mat’l(s) required (i.e. look / match Mat’l Heat #, size, type, etc.) and mark on each item(s) the mat’l request number,


Arrange forklift / rigging vehicle to transport item from stockyard to fabrication shop,


For the case where material is not available at stockyard, prepare Material Requisition and give to Purchasing Dep’t, or, inform Supervisor to instruct Client to supply mat’l, F)

Receive and inspect mat’l

delivered by Purchasing Dep’t or Client, add to Delivered Mat’l Summary List spreadsheet, G)

Prepare /

accomplish gate pass for the delivery of finish members / spools to Client or galvanizing shops. 7. Support to Estimation Team during proposal projects / bidding stage, by preparing Bill of Material (BoM) / Bill of Quantity (BoQ) based on the engineering drawing supplied by prospect Clients. 8. Assigned to prepare structural layout and analyze the adequacy of the steel members for 21-circular platforms attached to a vertical vessel, 10-T-1505 (5.3m (dia.) x 74m (high) vessel), for our client Bilfal in Jubail, KSA. Design and calculation are based on Process Industry Practices (PIP) and Sipchem structural design criteria. Checking of (IFC) Engineering drawings for Client, and Fabrication drawings for Production Division.

9. Assigned to prepare structural layout and analyze the adequacy of the steel members for 15-circular platforms attached to a vertical vessel, 10-T-1504 (2.2m (dia.) x 42.7m (high) vessel), for our client Bilfal in Jubail, KSA. Design and calculation are based on Process Industry Practices (PIP) and Sipchem structural design criteria. Checking of (IFC) Engineering drawings for Client, and Fabrication drawings for Production Division.

10. Support Estimation Team on preliminary engineering design for basis of steel tonnage and concrete volume (for bidding) of 10 shelters in a 200m x 100m fabrication yard. The shelters range from plan dimensions of 10mx19m up to 16.2mx30m size. Building types as follows: Workshops (with 10tons crane each), warehouses, offices, canteen, and prayer hall. 6 / 18

Employer : GS East Asia Manila, Inc. (Feb. 2, 2015 ~ Feb. 9, 2017) 12th Floor, Aeon Prime Building, Northbridge Avenue cor. Alabang-Zapote Road, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines, 1781. Job Position:

Design Engineer III / Asst. Manager

Duties / Responsibilities (Philippine Office):

1. Attend telepresence meetings with GS Korea to clarify scope of work between offices. 2. Review of Client's Invitation To Bid (ITB) documents to gather informations about required design codes, material specifications, standards, client preferences, geotechnical reports, etc. that will be used as basis in the proposal / generation of the bill of materials (BM). 3. Help prepare Technical Queries (TQ) to Client for any inconsistencies or lack of relevant design information

/ requirement from the supplied ITB documents.

4. Participate in reading Tender Bulletins (TB) or clarifications by Client to the TQ that will affect the output of design / BM. Update the design / calculations as required. 5. Specifically assigned to review and compare windloads computed from ASCE 7-10 and RNV 2013. 6. Help prepare / review of Civil and Structural "Internal Instruction" and "Job Instruction" that will serve as the team's common design reference towards the generation of the BM. 7. Review and coordinate design informations from other disciplines such as plot plans, piping / equipment / cable loadings, setting elevations, cable routings, fire hazard maps, etc. Make sure that latest information is used in the design.

8. Help validate in-house design tools (excel spreadsheets) that will be used for load calculations and material take-off.

9. Adhere to Department’s Checklists upon performing structural design as part of satisfying ISO requirements

/ standards (for excellent quality of outputs).

10. Make structural layout for assigned structures to satisfy other disciplines' support needs / requirements for their items, thus, coming-up with a support system which is stable, feasible, and clash-free. Utilizing MicroStation in doing the 3D stick-model (and for importation to STAADPro) 11. Assigned to design EPC1 main piperack, EPC1-PR-001, 8m-wide x 435.9m-long x 15m-high. Utilizing STAADPro program for the design of the structure and AFES (Automatic Foundation Engineering System) program for the design of the foundations. An in-house spreadsheet tool was used to summarize the BM. 12. Assigned to design EPC2 piperack, EPC2-PR-005, 6m-wide x 42m-long x 9.5m-high. Utilizing STAADPro program for the design of the structure and AFES program for the design of the foundations. An in-house spreadsheet tool was used to summarize the BM.

13. Perform adequacy and consistency self-check on assigned structures before submitting to the Structural Part Lead / Checker.

14. Incorporate comments by Structural Part Lead / Checker. 15. Meet submission deadlines and work within allotted manhour budget. 16. Provide technical advice to other team members, especially the Junior Engineers / Staffs. 17. Properly file design-output documents and check prints for ISO auditing purposes. 18. Perform other work assignments given by the Project Leader and / or Structural Part Lead. Project (Duration):

Proposal Project: Algeria HMD Project - EPC1 & EPC2 (Oct 2016 ~ Feb 2017) Client: Sonatrach

Project Location: Hassi Messaoud, Ouargla, Algeria Product: Oil and Gas.

Proposal Project: DUQM REFINERY PROJECT (Apr 2016 ~ Jul 2016) Client: Duqm Refinery & Petrochemical Industries Company LLC Project Location: Duqm, Oman

Product: LPG, Naphtha, Jet / Kerosene, Diesel (Euro V Standards), Petroleum Coke, & Sulfur. 7 / 18

Duties / Responsibilities (Philippine Office):

1. Provide quality checking for “Issued For Construction” engineering drawings (for piperacks, equipment support structures, shelters, pump & horizontal vessels foundations, structure foundations) done by Korean drafting subcontractors.

2. Perform consistency check of IFC eng’g drawings against structure / foundation design calculations, latest vendor prints, plot plans, fabrication drawings (general arrangement / assembly) and other reference drawings. 3. Adhere to Department’s Checklists upon performing the drawing check as part of satisfying ISO requirements / standards.

4. Tabulate findings / comments to each drawing sheets for submission to GS Korea for their further assessment. 5. Strictly meet submission deadlines and work within allotted manhour budget. Project (Duration):

CLEAN FUELS PROJECT (Nov 2015 ~ Jul 2016)

Client: Kuwait National Petroleum Company

Project Location: Kuwait

Product: Petroleum Products with low Sulfur Content.

Duties / Responsibilities (Philippine Office):

1. Assigned as Assistant Lead Engineer for steel structures and foundations (such as piperacks, equipment structures, platforms, and miscellaneous pipe supports). 2. Supervise six (6) Structural Design Engineers and assign to them their respective structures to design. 3. Confirmation of Scope of Work / work demarcation with GS Korea. 4. Review of ITB documents (Client / Project specifications & requirements). Summarize all the findings

(inconsistencies or lack of relevant design information / requirement) as Technical Queries (TQ) for submission to the Client.

5. Review Tender Bulletins (TB) or clarifications by Client to the TQ. Discuss to assigned engineers the effect of the TB with their respective items and advise them to update the design / calculations. 6. Review / amend the “CAS Job Instruction for Material Take-Off” (a design & MTO guide for assigned engineers). Check its consistency with the ITB documents. 7. Coordination with other disciplines for the purpose of extracting / confirmation of design data (piping / equipment

/ cable loads, setting elevation, etc.), also, to provide them with relevant information which will enable them to proceed with their design activities, as well.

8. Review assigned engineer’s structural layout, STAADPro input (such loads, member orientation / end-connection condition, base support condition, member parameters, material strength, etc.), STAADPro output (passed the drift / deflection limit and structural member strength ratio limit), AFES input (material strength - concrete & reinforcement, soil bearing capacity, etc.), and AFES output (foundation stability checks - sliding, overturning, uplift, and soil bearing / BOF contact area; and foundation strength check - bending, axial, one-way shear, and punching shear).

9. Provide / upload / inform team members of the latest design information to be used for their design. 10. Monitor work progress of team members and report to CAS Resident Engineer (Korean), Department Manager, and overall Lead Engineer.

11. Review of software developed (excel spreadsheet) by team members for project usage. 12. Review / consolidation of output of team members and prepare Bill of Materials Summary Sheet. 13. Consolidation of each team member’s lessons learned. Project (Duration):


Client: Abu Dhabi National Chemicals Company (ChemaWEyaat) Project Location: Al Gharbia in Abu Dhabi, UAE

Product: Chemicals (Naphtha, Benzene, Toluene, Paraxylene, Orthoxylene, Meta-xylene, Cumene, Glycols, Phenol, LPG, light Naphtha, & Polyethylene) 8 / 18

Duties / Responsibilities (Philippine Office):

1. Review / familiarization of GS’ work procedures and standards. 2. Participation on Department internal seminars.

3. Review of “Invitation To Bid” (ITB) documents.

4. Preparation of Technical Queries (TQ) and review of Client clarifications / Tender Bulletins (TB). 5. Preparation of “Job Instruction for Material Take-Off (MTO) and Proposal”. 6. Prepare MTO of assigned structures (piperacks & equipment structures). 7. Participation on making Value Engineering and Alternative List. Project (Duration):


(Unit 180 - Diesel Hydrotreater Unit, DHTU) (Feb 2015 ~ May 2015) Client: International Petroleum Investment Company (IPIC) Project Location: Northern Emirate of Fujairah, UAE Product: Oil & Gas

Employer: Foster Wheeler (Brunei) Sdn Bhd (May 2, 2014 ~ Feb. 28, 2015) Unit 507-509, 5th Floor, Kompleks Jalan Sultan, Bandar Seri Begawan, BS8811, Negara Brunei Darussalam.

Job Position:

Civil and Structural Engineer

Duties / Responsibilities (Brunei Office):

1. From Singapore, transferred to Project Site to continue design engineering services to Client and support Construction team on their Site Technical Queries (STQ). 2. Attend 3D model (SPR) review with other disciplines and Client. Actively participate in the discussions, point-out considerations made on the design, and also consider comments given by other disciplines / Client

(Tags) which gives more emphasis on the plant’s operations, worker’s safety, and construction activities. 3. Provide solutions and close-out the “Tags” mentioned above. 4. Check (Site) Drafter works, such as “Issued For Construction” (IFC) drawings. 5. Review of fabrication drawings, check its consistency with the IFC engineering drawings. 6. Attend toolbox meetings which usually discusses safety talks. Project (Duration):

BLNG COGEN II PROJECT (May 2014 ~ Feb 2015)

Client: JV between Brunei Department of Electrical Services (DES), Brunei LNG (BLNG), and Brunei Shell Petroleum (BSP)

Project Location: Lumut, Brunei Darussalam

Product: Electricity

9 / 18

Employer: Foster Wheeler Asia Pacific Pte Ltd, Singapore (May 20, 2013 ~ May 4, 2014) 991E Alexandra Road, #01-25, Singapore, 119973.

Job Position:

Civil and Structural Engineer

Duties / Responsibilities (Singapore Office):

Front-End Engineering Design (FEED) Phase

1. Familiarization of the Project history / background / scope of work. Study of Detailed Engineering Design Data, Project Standards, Design Procedures, Manuals and other references. 2. Project is a brownfield type and most of the design calculations for the existing facilities / structures are already missing or got corrupted, my task is to make the STAADPro model / file of my assigned structures

(which are piperacks, pipe bridges, and multi-level equipment support structures) based from Client provided old engineering drawings, plot plans, and piping arrangement drawings. 3. As the electronic information given are in bulk and mixed-up, I was assigned to see / review each file and segregate them according to area / unit, and then segregate furthermore per structure item. 4. For some structure items that lacks information (i.e. missing engineering drawing sheets), I coordinated with

/ requested to the FW Structural Engineer assigned at site (Brunei) to provide as-built sketches of the structure. And in some cases, I was assigned by the Lead Engineer to go to site to investigate / do the as-built sketching.

5. Attend the BLNG (Client) safety training courses (in Brunei) and pass their exams, to be granted an ID badge which will give me right to access the existing plant premises to be able to conduct the above said structure investigations.

6. Prepare layout of additional structural supports for new pipelines that Brunei Shell Petroleum (BSP) will use to supply (high pressure) fuel gas to the Department of Electrical Services’ (DES) two new Gas Turbine Generators (GTG).

7. Prepare layout of additional structural supports for new pipelines that DES will use to supply (high pressure) steam to Brunei LNG Facility’s (BLNG) three new Waste Heat Boilers (WHB). 8. Investigate the existing structure and foundation’s strength capacities if it can withstand the additional piping, equipment, steel member loadings. Propose resolutions to the Lead Engineer in case the structure is found failing - such as strengthening the structural layouts (i.e. additional bracing systems), member strengthening (i.e. use of stiffening bars or combining sections), foundation enlargement (i.e. use of HILTI post-installed reinforcements), and additional tie-beams - just to name a few. 9. Assigned to provide an adequate size (using Hydraulic Institute Standard, ANSI HI 2.1-2.5 1994) and design a cooling water return pit supporting 2 - (1 ton) vertical pumps on the slab cover. 10. Study / adopt design procedures from Shell’s Design Engineering Practices (DEP v34). 11. Prepare design calculations of assigned structures (super-structures and foundations). Utilizing STAADPro and (excel, in-house) spreadsheet programs.

12. Monitor and check drafter /

Contact this candidate