KANNAN.G
ELECTRICAL PRECOMMISSIONING ENGINEER & COMMISSIONING SUPERVISOR
Mobile +918*********(India), +919*********
Email: ada4dx@r.postjobfree.com, ada4dx@r.postjobfree.com
PROFILE SUMMARY
A dynamic professional with about 18 years of experience in Installation, Precommissioning & Commissioning, operation & Maintenance, of Power & Distribution Transformers, HV & LV Motors, Switchgears, Heaters, UPS & Battery, Plant lighting network, and Static & Numerical control relays in Oil & Gas, Power and petrochemical industry
DCS Loop check Co-ordination, supporting to instrumentation Team and Troubleshooting.
Deft in improving efficiency of Electrical & control using available resources & by searching/ installing suitable equipments as per requirement
Proficient in the areas of selection of field electrical equipment, installation, testing & commissioning of all field equipments and control systems
Preparing and maintenance/services schedules for conducting regular testing to ensure the performance of equipment
Implementing knowledge Onshore Oil & Gas Standards, work Permit System, Safety procedures, Tools, and Technological advancement in Electrical field
Involved in the testing of Logical Sequence, interlocks in Start-up and Shutdown, based on schematic diagram
Expertise in handling maintenance of Diesel engine Systems
Strong problem solving skills and technical skill enables effective solutions that positively impact customer satisfaction and operational costs
Planning, scoping, estimation, orders required materials spares and equipment tracking & implementation of shutdown job plans within pre-set budgets and deadlines and coordinating project for the set up facilities
ORGANISATIONAL EXPERIENCE (START FROM CURRENT EMPLOYER):
FEB – 2012 to till date with Tecnimont Pvt Ltd as an SR. Engineer Electrical (construction) – Pre commissioning & Commissioning India, Abu Dhabi, Saudi Arabia.
List of projects executed:
NATIONAL PETROCHEMICAL INDUSTRIAL Co(NATPET) Polypropylene Reinstatement Project: Oct-2019 to Nov-28
Al Dabbiya Surface Facilities Phase III, New CPP ADNOC PROJECT, Abu Dhabi Duration: Aug- 2017 to Aug-2019
SADARA HPLDPE PROJECT, SAUDI ARABIA Duration: Dec- 2014 to Dec-2016
BOROUGE-3 POLYLIOFIN PROJECT, Abu Dhabi (RUWAISE) Duration: Aug- 2012 to Nov-2014
RELIANCE POWER PROJECT VIDARBHA INDUSTRIES POWER LIMITED Maharashtra Butibori:Feb-2012-Aug-2012
Job Responsibility:
MV/LV Power distribution transformer commissioning, maintenance.
Commissioning of HV & LV switchgears (Make: Schneider & ABB, Alstom, Powell, Eaton, Wescosa, Siemens)
Commissioning of HV and LV motors, No load test run, Insulation resistance test (IR), Winding resistance test (WR), and Loop check of motor starter controls.
Testing & Commissioning of HV Circuit breaker. (33kV,11Kv,3.3Kv,415V)
Commissioning and loop checks of Numerical relays.
Commissioning of UPS, Battery & Battery charger.
33/11Kv/3.3Kv Bus bar protection stability test
220/33kv,33/3.3Kv,33/11Kv, Transformer stability &Sensitivity Test
Co - ordinate with operation and process team while commissioning the process plant.
High voltage test for power cables, HT bus bars and HT Bus ducts.
To ensure that all persons within the Electrical team fully comply with all Project HSE requirements.
HT & LT Motors including Protective relay test & final test reports prepared.
Plant Normal, Emergency Lighting system and DC Critical Lighting systems testing
Approval of drawings, Project Scheduling, Supervision, Commissioning, Operation, Maintenance and handing over as per clients Oil & Gas and Petrochemical requirements.
Operational Functional and Loop Checking for Commissioned systems co-operate with DCS.
Inspection to be carried out for the laid cable & termination to be inspected as per ITP and Approved Documents.
Technical design and modification work for substation equipment with field system.
Prepare and monitoring the daily work schedule and Activities.
Maintenance in all electrical work under HSE and safety precaution for working in hazardous area.
Maintaining the Day by Day substation Operation & Maintenance activity Logbook.
Respond the on-call Emergency breakdown activities to reduce the plant down time.
Carry out installation, maintenance and repair of a wide range of High and Low voltage equipment’s and associated systems such as Motors, Switch Gears, Control Panels, Battery, UPS, all lighting’s etc. in the assigned operating plants adhering to the work specifications and HSE measures.
Carry out the skilled diagnosis of fault and perform repair of equipment; performing electrical isolation and de isolation for LV systems in accordance with the maintenance procedure or work instruction in the shortest time.
Participates in carrying out the major equipment in the Plant Complies with all HSE and fire related rules and regulations and observes all requirements.
To take initiative to become multi-skill person and reviewing technical projects/modification documents and raise concerns as required
I have knowledge of DOL starter, Star Delta starter, of Power and Control Diagram,
Pre- commissioning, Commissioning activities LV breakers Functional test,
Commissioning of UPS, Battery & battery chargers,
Testing Commissioning & Functional test of High-Power Induction Heater up to 1000 KW
Maintenance & functional testing of Bridge crane and Hoist trolley up to 50 Ton
Nov – 2010 to Dec - 2011 with Powertech engineering LLC, Oman, as Electrical Testing & Maintenance Engineer
List of projects executed:
Oman electricity board Revamping project, Oman (Muscat)
Oman electricity board Wade Kabeer substation 132Kv Extension Bay project Oman (Muscat)
Petroleum Development of Oman Maintenance project (PDO) Oman
Prepare the drawing for revamping circuits, cable interconnection schedule.
Target achieving the Revamping project within 3 days for 132kv Relay panel.
ITP Preparation for All testing as per Client requirement.
132/33/11Kv Bus bar protection stability test
132/33kv Transformer stability test
MV/LV Power distribution transformer commissioning, maintenance.
Commissioning of HV & LV switchgears (Make: Schneider & Alstom, Siemens, L&T)
Commissioning of HV and LV motors, No load test run, Insulation resistance test (IR), Winding resistance test (WR), and Loop check of motor starter controls.
Testing & Commissioning of HV Circuit breaker.
Commissioning and loop checks of Numerical relays.
Commissioning of UPS, Battery & Battery charger.
Pre- commissioning, Commissioning activities LV breakers Functional test
Carry out installation, maintenance and repair of a wide range of High and Low voltage equipment’s and associated systems such as Motors, Switch Gears, Control Panels, Battery, UPS, all lighting’s etc. in the assigned operating plants adhering to the work specifications and HSE measures.
Operation, Testing & Maintenance of Electrical circuit Breakers VCB, ACB and Vacuum Contactor. Insulation resistance Contact resistance and breaker timing test.
Maintenance of HV and LV motors including auxiliary pump motor at site.
Maintenance No load trail run of Diesel Generator up to 1500 kVA for emergency power source.
Maintenance and Commissioning of UPS and related Battery banks with vendor.
Maintenance of Plant Normal and Emergency Lighting networks.
Maintenance of 220 VAC power socket and 415 VAC welding sockets.
Prepare and monitoring the daily work schedule and Activities.
Maintain the Substation logbook to communicate the day to day activities to superiors.
Prepare and submit the Maintenance activities check list and substation Monitoring check list.
Operation and Monitoring Substation Electrical equipment and follows the Lockout & Tag out procedure for Isolation & De Isolation activities in safe way.
Feb – 2008 to Oct - 2010 with De Technosys Electromechanical LLC (Dubai, Abu Dhabi) as Electrical Testing Engineer
Lists of Projects executed:
132/11 kV Substation DEWA, AL QUSAIS EAST.
132/11 kV substation DEWA, MRTC.
132/11 kV substation DEWA, JUMEIRA VILLAGE.
132/11 kV substation DEWA, TIJARA TOWN.
132/33/11 kV substation FEWA, AJMAN WATER TOWER
132/11 kV substation TRANSCO, KHALIFA- IIA.
400 kV substation TRANSCO, SHUWEIHAT.
Testing and Commissioning of Control & Relay panels like line, transformers, feeders and bus bar protections up to 132 Kv Level.
Testing and Commissioning of Numerical Relays of AREVA, SIEMENS, REYROLLE make for various Protection schemes.
Testing and Commissioning of Indoor and Outdoor substation, GIS System up to 132 Kv levels of AREVA and SIEMENS make.
Prepare testing and commissioning schedule. Testing of Numerical and electromechanically protection relays.
Testing of 132 kV GIS and 33 kV switchgears power equipment’s.
Testing of Complete scheme check for the control and relay panels.
Testing of 132 kV & 33 kV GIS and 33 KV switchgears power equipment’s.
Testing and commissioning of AVR and Annunciator.
Stability and sensitivity test for 132 KV bus bar differential protection.
Stability and sensitivity test for Transformer differential protection.
From Aug 2002 to JAN 2008 Technosys Engineer and Consultant (Chennai) Pvt Ltd, India Sr.Electrical Testing &Maintenance engineer.
List of Projects executed:
JINDAL STEEL&POWER Chhattisgarh
NTPC BILASHPUR
TATA STEEL& POWER JAMSHEDPUR
ARCI HYDERABAD
Testing&Commissioning of 6.6KV(Siemens),33KV(ABB) Switchboards,415V(L&T) Switchgear boards,Power Transformers (2MVA,1.6MVA),Protection Relays(Over Current, Earth Fault, Overvoltage, Under Voltage) Cable differential,HT< Motors, Power Cables, Control Cables.
HV Testing of 24KV Bus duct & PT’s NGT
Testing&Commissioning of 6.6KV (Siemens) Switchgears, Power Transformer (1.6&2 MVA),
Protection Relays, HT < Motors, LT Switch board (L&T)
33KV,11KV & 415V switchgear equipment,1.5MVA Transformer,500KVA DG Sets Parallel operation & Maintenance
Operation and Maintenance of HV/ LV power and Distribution transformers, Switchgear and Motors.
Operation, Testing & Maintenance of Electrical circuit Breakers VCB, ACB and Vacuum Contactor. Insulation resistance Contact resistance and breaker timing test.
Maintenance No load trail run of Diesel Generator up to 1500 kVA for emergency power source.
Maintenance of VFD drive panel as per manufacture check list.
Maintenance and Commissioning of UPS and related Battery banks with vendor.
Maintenance of Plant Normal and Emergency Lighting networks.
Prepare and monitoring the daily work schedule and Activities.
Handled Test Equipments:
Multi meter (fluke - V), 5KV Insulation tester (Megger-MIT520/2), Winding Resistance Tester (Megger – MTO-210, Range-10A), Motor Circuit Analyser (ALL TEST IV PRO), Digital Low Resistance Meter (Megger – DLRO 10X), Oil Test Kit (Megger –FOSTER OTS60AF/2) OMICRON (CMC-356,CT ANALYZER,CPC100,SFRA,TANDELTA TEST KIT),FREJA,PROGRAMMA
Qualification Highlights:
Training Courses.
H2S and Breathing apparatus training at Abu Dhabi,
Permit to work (PTW) receiver training from ADNOC,SADARA
Hazardous area training,
Confine space training,
Lock out Tag out Processes training
EDUCATION
Diploma in Electrical & Electronic Engineering (1998-2001) Annamalai polytechnic chettinadu Tamilnadu, India.
PERSONAL DETAILS
Date of Birth: 26-11-1981
Permanent Address: 2/458b, Sivasakthinagar 1st Street, Perungudi, Madurai, Tamilnadu, India- 625022
Languages Known: English, Tamil, Hindi and Malayalam
Nationality: Indian
Marital Status: Married
Gender: Male
Passport Details: NO: P5808175, Issue Date: 30/12/2016, Exp Date: 29/12/2026, Place of issue: MADURAI
DECLARATION:
I do here by declare that above mentioned fact is true and correct to the best of my knowledge and belief.
Yours truly,
(KANNAN.G)