Resume

Sign in

Pressure Vessel / Piping Inspector, QAQC / Welding & NDT Supervisor

Location:
Lagos Island, Lagos, Nigeria
Salary:
Negotiable
Posted:
December 19, 2019

Contact this candidate

Resume:

Page */*

Curriculum Vitae

JUDE JOHN IMADEJIE

+234**********, +234**********

Email: ada3y4@r.postjobfree.com

EDUCATION

Enugu State University of science & technology > 2006 B.Eng. Electrical Electronics Engineering

PROFESSIONAL QUALIFICATIONS / TRAINING

API 510 - Pressure Vessel Inspection; Cert. No: 71164 API 570 – Piping Inspection; Cert. No: 92718

API 580 - Risk Base Inspection; Cert. No: 65708

CSA W178.2 - Canadian welding bureau (CWB level 2); Cert. No: 19792 AWS - Certified Welding Inspector (AWS-QC1); Certification No.: 12112961 PCN - British Standard in Non-Destructive Testing (UT & RFI); Cert. No: 324542 ASNT - Certified Level II (SNT-TC-1A) in MT, PT, UT & RFI. ISO 2001:2008 QMS Auditor / Lead Auditor Training Course. Nigeria Institute of Safety Professionals (SPDC ACCREDITED); Contractor Employee HSE Course (Level 1.2).

Contractor Employee HSE Course (Level 3 (Supervision)). Total E&P / Saipem Nigeria; Confined Space Entry Training. Total E&P / Saipem Nigeria; Work at Height Training. Valid Offshore Medical Certificate.

COMPUTER SKILLS

MS Word, MS Excel, Power Point and Outlook, Lotus Note. EXPERIENCE RECORD

Remarkable 12+ years of oil and gas experience (Onshore / Offshore) fabrication and in in-service inspection of pressure / piping equipment, dimensional inspection, testing / inspecting welds and construction materials.

Outstanding surveillance experience (Onshore / Offshore fabrication, Refineries & Process plants) with hand-on experience in working with written procedures, structural drawings, international codes / standards.

Operational knowledge of the precision measuring equipment with hand-on skills in inspecting welds, casting, forgings, OCTG's, Fixed equipment; using the required NDE techniques. CAREER HISTORY

API Inspector (Static Equipment)

Comerint s.r.l

05.2019 > Present

Basic Duties & Responsibilities: -

External, On-stream & Internal inspection of operating units and systems; static equipment including pressure vessels, heat exchangers, air fin coolers, columns, fired heaters, stacks, drums, tanks, miscellaneous equipment and piping to ensure compliance with standards, codes and specifications.

Identifying areas of special concern and deterioration (e.g., dead legs, injection points, corrosion under insulation, erosion & corrosion/erosion), preparation of inspection procedures and advisories to follow-up their resolution to improve plant integrity. Page 2/4

Determining repair / replacement requirements, remaining service life and performing retirement thickness calculations of equipment and piping based on inspection findings and operating conditions.

Evaluating factors, such as materials used, safety devices, regulators, Jacketing, riveting, painting/coating condition, welding, erosion/corrosion, cracking, and safety valve operation.

Selection and supervision of Conventional NDE (UT, PT, MPT & RT) and Advanced NDE techniques based on process streams and equipment/piping, including review of interpretations.

Specifying and witnessing pressure tests (Hydrostatic / Pneumatic) of equipment, piping and pressure safety valves.

Preparation of inspection reports / certificates with all findings, abnormalities and recommendations applying RBI and updating through database.

Reviewing welding procedures including heat treatment requirements.

Specifying procedures including welding, painting and related QA/QC for repair works.

Preparation of post shutdown inspection reports with all observations, abnormalities and repair recommendations for long term remedial actions.

Examining permits and inspection records to determine that inspection schedule and remedial actions conforms to procedures and regulations.

Reviewing and updating the inspection and NDE techniques required for each equipment, including the extent and locations of inspection

Ensuring all NDE results are evaluated and determined to be accepted or rejected, with recommendations to resolve all deficiencies.

UFR QAQC Welding Supervisor

Total E&P Nigeria Limited

10.2014 > 11.2018

Basic Duties & Responsibilities: -

Reviewed and monitored the welding activities executed by the EGINA UFR Contractor, Subcontractor & Suppliers on site.

Inspected and monitored the fabrication of subsea structures such as FLETs; ITAs, T-FLET, SIV, PLEM, PWMD & RBS.

Reviewed and monitored Destructive (Mechanical Test) and Non-Destructive activities executed by the EGINA UFR Contractor, Subcontractors & Suppliers.

Assisted in the supervision of onshore Field Joint Coating (3LPP & 5LPP) of the welded GE, WI, & PR Flow-line Quad joints.

Carried out review of hydro-test packs prior to hydro-testing of structures.

Participated in the witnessing of Pig-gauging, Retro-jetting / flooding of piping systems prior to hydro- testing.

Witnessed the hydro-testing of piping systems on structures and signing-off of test packs.

Monitored / inspected the fabrication activities of the FPSO piles, SHR piles and Buoyancy tanks.

Participated in the inspection and supervision of the Double / Quad joint fabrication activities on site.

Assisted in the analysis of UFR Contractor Site technical queries / deviation requests / concession requests and preparation of comments and proposed answers to these site queries.

Provided technical assistance and relevant quality controls during site construction.

Ensured that Contractors / Subcontractors perform welding inspection activities on site in accordance with project requirements, specified acceptance criteria and the contracted scope of work.

Page 3/4

Attended Quality meetings and assisted in providing all necessary help to close CAR, NCR that occurred during the site construction.

Inspection Engineer

Bureau Veritas Nig. Ltd Port Harcourt, Rivers State 04.2013 > 09.2014

Basic Duties & Responsibilities: -

Reviewed technical requirements, drawings, specifications, inspection & test plans in accordance with international codes and client specification.

Performed in-service inspection / shut down inspection of tanks, pressure vessels, heat ex-changers, fin fan coolers, process-piping system, flares & lifting inspection.

Performed standard tests to verify condition of equipment and calibration of meters and gauges, using test equipment and hand tools.

Evaluated factors, such as materials used, safety devices, regulators, construction quality, riveting, welding, pitting, corrosion, cracking, and safety valve operation.

Calculated allowable limits of pressure, strength, and stresses.

Examined permits and inspection records to determine that inspection schedule and remedial actions conforms to procedures and regulations.

Witnessed Mechanical Tests (Destructive Test) for the PQR's and all WQT's.

Witnessed / reviewed WPS, PQR, welders & welding operators’ qualification.

Reviewed and controlled the fabrication activities as per the ITP / contract specification / codes and approved drawing.

Overall quality control responsibility such as interaction and co-ordination with clients, repair planning, welding & NDE, in process inspection verification ranging from material identification.

Performed surveillance during repair / inspection to verify compliance with specified procedure including pre-heat, inter-pass temperature control and post heat requirements.

Witnessed dimensional checks for completed weld as per drawing and specification.

Reviewed / witnessed NDE examination and signing off of inspection reports.

Witnessed hydro testing of piping systems and tanks. Welding Inspector

Dominus Vobiscum Engineering Ltd Port Harcourt, Rivers State 07.2011 > 04.2013

Basic Duties & Responsibilities: -

Carried out material identification, visual inspection on joints, fit-up; before, during and after welding.

Reviewed WPS prior to welding.

Monitored welding activities as per AFC drawings & WPS.

Carried out visual inspection of completed welds on the pipe spool.

Supported the development of repair plans and work procedures.

Maintaining of latest project specification, ITP's, procedures and drawings.

Witnessed welders' qualification test (WQT) and procedure qualification test.

Monitored consumable storage, handling, packing and drying processes / temperature as per project approved procedure.

Maintained proper chainage recording and total distance covered each day.

Ensured that all daily activities report are taken and completed for signing by client rep. Page 4/4

Maintained traceability for welded joints & documentation.

Controlled welding consumables and weld defect rate as per procedure. NDT Inspector

Sowsco Inspection Port Harcourt, Rivers

06.2009 > 06.2011

Achievements;

Conducted & coordinated NDT - MT / PT / UT / on welded joints (Structural & Piping Systems) as per inspection & test plan (ITP) & given specifications.

Performed ultrasonic scanning of welded joints, lamination check on stainless collars.

Performed ultrasonic scanning (shear wave) on slip/offset areas of drill pipes (DS-1 CAT. 5)

Inspection of drill pipes, casing & tubing (API 5CT), BHA tools, fishing tools, subsea, & completion tools onshore / offshore for various client.

Periodical calibration of UT equipment.

Performed Visual & Wet MPI (Florescent method) on pin & boxes of connections.

Interpreting, organizing and reporting test results.

Reviewed final documentation prior to submission to client. NDT Inspector

Tuboscope NOV Port Harcourt, Rivers

10.2006 > 06.2009

Achievements;

Carried out ultrasonic thickness gauging of vessels, separators, tanks & associated piping at various onshore/offshore locations.

MT / PT inspection on elevators, cargo boxes, hand slips, safety clamps, power tongs, separators, piping, tanks etc. at various project sites.

Performed complete inspection of the tools and followed the standard work procedures and policies while inspecting.

Prepared records of all the inspection work carried out and when required; provided sketches of the same.

Administered the process by using special calibrated tools and simple hand tools for inspecting the products.

Studied and interpreted the assembly blueprints and performed the inspection in accordance with the technical specifications.

PERSONAL DETAILS

DOB: 05-03-1980

Sex: Male

Marital Status: Married

Nationality: Nigerian

INTERESTS

Traveling Reading Football



Contact this candidate