FERNANDO M. MAHILOM

** ***** ******* *****, **, Calgary, AB, T3J 3S5

Phone: 403-***-**** I ada1pf@r.postjobfree.com

Professional Summary

Piping Designer/Drafter with excellent knowledge of 2D/3D equipment and piping modeling and layout design and drafting. A team player and able to handle multitask work and flexible to meet the needs of the project. Excellent communications, office administration, file organization and people skills. Has a strong professional ethics and self-motivated. Has a drive to learn and apply new knowledge quickly. He is enthusiastic, passionate and very dedicated to complete the tasks assigned to him.

Highlights

15 years’ experience from 2D drafting to 3D modelling and piping design and layout using CadWorx, Auto Plant, PDS, Micro station and AutoCAD.

Knowledgeable in Navisworks Simulate, Isogen, MS Office and ProCad 2D Autoflow, Piping Specs and Codes used in North America.

Work Experience

Piping Designer/Drafter – Part-time - (Jan 2017 - Present) - 3D Laser Scanning Solutions Ltd., Calgary, AB

As-built Projects – modifications, back drafting and creating packages of PIDs, GAs, Site Plans, Plot Plans, PFDs for multiple small projects using Auto Cad 2015 and CadWorx.

Site field work for as-built and scanning projects.

Mechanical Technician/Piping Designer - (August 2018 – Nov 2018) – Stantec, Fredericton, New Brunswick

3D piping layout, model and design for the Project Tiger, Irving Tissue Plant, using Auto Plant 3D design and Auto Cad 2016.

ISO creation and modifications.

Update PID’s as per required changes.

Piping Designer - (Jul 2014 – Feb 2015) - Wood Group Mustang, Calgary AB

Cenovus SAGD Projects and Husky Energy Projects - modeling and piping layout of additional well pads using Auto Plant.

Worked on Husky Colony Well Pad Phase 2 expansion project, modelling and piping layout of additional 20” emulsion, 12” steam and 3” fuel gas pipelines from Central Field Facility to Well Pad D and Colony Pad.

Piping Designer - (Jun 2013 – Jul 2014) - Fortress Engineering Inc., Calgary, AB

Access Pipeline Inc. Projects - Sturgeon Blend Loop and Trim System Upgrade - The purpose of this project is to make modifications to the Sturgeon Terminal blend loop to allow for the future higher flow rates and pressures and to make additions and modifications to the trim pump system to allow injection of diluent at higher pressures and increased blend flow rates.

3D piping layout and design on additional small pipes using CadWorx.

Access Pipeline Inc. Project - NEX Facility - The Project objective is to design, permit and construct an NPS 42 pipeline from the MEG Christina Lake and Devon Jackfish facilities to the Access Sturgeon Terminal to ensure the blend capacity of the Access pipeline system remains of the Owners production forecasts.

Modeled equipment area, pumps, tanks and connecting piping using CadWorx.

Created and modified ISO’s as per client’s specifications and standards.

Flint Hills Resources Project –Hardisty Terminal, Trim Blend Hydraulic Study - Created, modified and updated GAs, PIDs, PFDs, Plot Plans, Line list and Tie-point list for FEED.

Inter Pipeline Limited Project – Kerrobert Terminal, Kerrobert Butane Injection Station - As-building Projects - Creating packages of PIDs, GAs, ISO’s, Site Plans, Plot Plans, PFDs and Line List for multiple small projects.

Mechanical Designer - (Nov 2010 – Jun 2013) - Hood Engineering, Calgary, AB

Jack Pine Mine MFT Centrifugation for Syncrude Project - This project includes pre-treatment modules, centrifuge modules, pipe rack, tank farm, and utility pump skid module.

Modeled tank farm and piping connections from the tanks to the pipe rack using Auto Plant Piping and Equipment.

MFT Centrifuging Commercial Demonstration Plant for Syncrude Project - This project includes pre-treatment modules, centrifuge modules, pipe rack modules, utility pump skid module, tank farms, surge pond and piping, pump barge and piping.

Modeled tank farm, created and modified PDFs, Plot Plans, PIDs and General Arrangement drawings using Auto Cad and Auto Plant.

Foster Creek Commercial Plant Multiple Projects for Cenovus - Creating packages of PIDs, 3D Model, GAs, ISO’s, Tie-in List and Line List for multiple small projects. Projects include: Wellhead Facilities, Fuel Gas Lines, Heat Exchangers Connections and Flare Knockout Drum Connections with hot-tap by-pass connections.

All around drafter that incudes electrical, civil and structural drawings.

Site field work for as-built project.

Piping Designer/Drafter - (Nov 2009 – Nov 2010) - AMEC, Calgary, AB

Kearl 1 Project – Imperial Oil Project

Back drafted Isometrics and minor piping design corrections and update using PDS.

Back drafted GAs, PIDs, PFDs, Plot Plans and Piping standards.

Assisted the Iso Coordinator for the Iso collection, logging and submission to Document Control for issuance and distribution.

Junior Piping Drafter - (Jul 2007 – Feb 2009) - Bantrel, Calgary, AB

Voyageur Utilities Project– Suncor - As a Junior Designer/Drafter, I was primarily assigned to do the ISO Coordination for the project.

Back drafted some of the Piping Drawings such as Plot Plans, Key Plans, GAs and Piping Standards as per the mark-ups and update of the Engineer using Auto Cad.

Back drafted Isometrics with minor corrections using Auto Plant.

Document Management Specialists - Vendor Coordinator - (Oct 2006 – Jul 2007) - Bantrel, Calgary, AB

Suncor MCU/MVU/MNU Projects - Analyzed catalogue and distributed all vendor drawings and other submittals as required according to each project (MCU/MVU/MNU).

Coordination of Vendor drawings for the 3 projects, and see to it that it was distributed properly with the 6 document control technicians.

Preliminary review of vendor drawings for conformance and ensure the timely review of submittals by the engineer and reviewer.

Documentation, processing and cross-checking of EWP for submission and distribution.

Document Control Specialist - (May 2006 – Oct 2006) - Worley Parsons, Calgary, AB

Suncor, Petro Canada, Sherrit, Shell Albian Sands Projects - Coordinated the activities of document control including distribution and auditing controlled documents.

Maintenance of electronic department directories, tracking and reporting on document review progress.

Organized and maintained all documents and specs pertaining to project design including drawing and RFI’s and DCN’s.

Managed archival activities for controlled documents and validation files.

Site visit for the preparation of new project for Shell Albian Sands.

CAD Drafter - (Sep 2005 – May 2006) - Shaw Cable, Calgary, AB

Drafted cable equipment (coax and fiber) in Micro station V8, V8i and AutoCAD.

Interpreted as-built field works orders and transferred data to digital base maps.

CAD drafting of powering grids, schematics and other related drawings.

Generated and maintained cells, multi-lines and various systems standards.

Information Records Specialist - (Jun 2004 – Sep 2005) - Fluor Canada Ltd., Calgary, AB

Sunoco Project - Coordinated squad checks for in-house engineering, off-shore and vendor data using ArcInfo and projects on-line systems.

Assisted with registration, filing and control of incoming and outgoing documentation.

Quality checks drawings and documents prior to entry data, issuing and distribution.

Scanned drawings and documents that are not available electronically and convert it to PDF file.

CAD Drafter - (July 1997 – May 2004) - QC Data Limited, Calgary, AB

Performs advanced data manipulation and conversion processing on assigned projects using Micro station V8 and AutoCAD.

Assisted project management with the implementation, training, and maintenance of defined project standards, documentation, operating procedures and methodologies.

Education

Piping Drafting Certificate, June 2008

Southern Alberta Institute of Technology, Calgary, AB

Certificate in Basic Accounting Applications, June 2004

Bow Valley College, Calgary, AB

Bachelor of Science in Business Management, April 1990

Philippine Christian University, Manila, Philippines

Bachelor of Science in Office Management, April 1988

Makati College, Makati, Philippines

Training

H2S Certificate - Current

First Aid Certificate - Current

Fundamentals of Process Plant Layout and Piping Design, Certificate of Completion, SPED

Safety Training, 2005

Microsoft Word 97, Access 2000, Power Point 2000, Excel 2000, Learn 2 University – On-line courses

Software Skills

3D Auto Plant V8i

CADWorx 2012, 2013

ProCad

AutoCAD, Micro station V8, V8i

Isogen, Navisworks

Microsoft Office (Word, Excel, Access and Power Point)

PDS and PDMS (Home study)

Contact this candidate