Mechanical Rotating Specialist

RONALD B. LAMAT

Omod, Bayawan City

Negros Oriental,

Philippines 6221

Email : ******@*****.***

Mobile Number : +971*********

QUALIFICATIONS

MASTER OF SCIENCE IN MATHEMATICS (MS Math)

Negros Oriental State University (NORSU)

Dumaguete City, Negros Oriental

21 Units earned

June 2004 – March 2006

BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING(BSME)

College of Engineering and Architecture (CEA)

Negros Oriental State University

NORSU

June 1996 – March 2001

Mechanical Engineering Board Exam (Government Exam)

Rating: 80.70% (Passed)

WORK EXPERIENCE

Position : SENIOR MECHANICAL ROTATING TECHNICIAN

Company : ABU DHABI NATIONAL OIL COMPANY

(ADNOC) OFFSHORE

Location : UMM LULU FIELD

Rotation : 21/21 Rotation

Date : September 2018 up to Present

JOB DESCRIPTION

Carry out maintenance and repairs of various types of Rotating Equipments such as Gas Generators and Turbines, Air and Gas Compressors, Pumps, Gear Boxes, Emergency Generators and Firewater Pumps. This includes regular monitoring and rectifications of defective equipment. Carries out independently or under instruction.

Leading and assisting vendor representative during preventive, corrective, breakdown, shutdown, turnaround maintenance in the Super Complex.

Routine maintenance and repairs of Firewater Pumps and Emergency Generator Caterpillar Engine. Regular tasks include monitoring the engines and auxiliary equipment, conducting periodic inspections, and ensuring that all machinery is lubricated and functioning at optimum levels. Performs engine startup, priming pump, adjusting engine speed and pump valves, laying hose, appropriate nozzle use, effective use of water and additives. Inspects, checks, services and adjusts the pump, hose lays, tank and reels for equipment readiness.

Attends requests from Direct Supervisor for maintenance of different rotating equipment and packages like gas turbines, gas compressors, gear boxes, diesel engines, air compressors, various pumps, mechanical seals, Dry Gas seals, Fan coolers, auxiliary systems of rotating equipments, utility packages and material handling equipments.

Carry out Level 1 (4,000 hrs) and level 2 (25,000 hrs) maintenance of GE Gas Turbine (LM 2500+). This includes Water Wash, Borescope of Axial Compressor, Combustor and Gas Generator, Visual Inspection of Primary, Secondary and Tertiary air Intake Filters, Changing of Filters, Inspection of Chip Detectors of Sumps and gear boxes..

Performing scheduled maintenance and inspections on a variety of Caterpillar Engines specifically C 175-20 and C3508. Collaborating with the broader team to ensure the efficient and effective operation of Caterpillar equipment. Maintaining detailed records of all maintenance and repair activities. Diagnosing and repairing mechanical, electrical, and hydraulic issues.

Able to read, draw & understand mechanical drawings, cross sectional drawings, Piping & instrument diagram.

Multi skill to carryout different activities at the same time to avoid impact on production and HSE.

Performs installation and mechanical alignment of equipment such as pumps, compressors, gas turbines, using relevant tools including computerized laser alignment tools.

Monitors and measures vibrations readings level and keeps records for each unit, including detecting abnormalities, analyzing problems and recommending corrective actions.

Uses and ensures safe use of proper tools and tackles on the job by assigned workforce.

Able to perform assigned tasks independently with minimum supervision.

Learns from the methods and errors and recommends to the supervisor on ways of continuous improvement.

Closely apply and follow-up all SAP Process to manage notifications, work orders preparation and closing, parts ordering, job history recording and ensure work order closed after work completion with updated report and attachments

Checks and verifies tools, spares and other materials for conformity with the order for its acceptance and fitness for use, on arrival of items.

Conducts safety toolbox talk before job execution, attends group safety meetings, conducts safety observation tours and reports incidents and near-misses.

Carry out Replacement of Pumps Mechanical Seal and Bearings.

Carry out planned PMs of rotating equipment and auxiliaries according to prepared job plans which includes strainer cleaning, lube oil replacement, air filters / fuel filters replacement, collecting samples for lube oil analysis

Assists various rotating equipment vendors for conducting stage inspections and overhauls for eg. rotor replacements, boroscopic inspection, level 1 & 2 inspections of gas turbines.

Suspending activities when there is a potential or actual threat to human life, the installation or the environment, and notify forthwith the responsible supervisor.

Carry out Laser Alignment of Pumps and Motors using Rotalign Smart Ex.

Carry out vibration monitoring for Rotating equipments using Scout.

Carry out Replacement of GE Gas Compressor Bundle (358 BCL and 438 BCL) including Dry Gas Seal, journal Bearing and Thrust Bearing.

Strict adherence to Plant Safety Protocols including Plant housekeeping.

Responsible for the support of company safety, environment, policies and programs.

Follow correct torque procedure in tightening of bolts.

Work closely with Contractor to ensure compliance to codes and standards during start-up of the Plants and Commissioning.

Witnessed Pumps performance, temperature and pressure during the entire testing, this includes leak checks, housekeeping and preservation of the equipment. Informed the Direct Supervisor for any abnormalities during the tests.

Witnessed Start-up of Gas Turbines and Compressors.

Position : LEAD MECHANICAL TECHNICIAN

Department : Campaign Department

Location : North Oil Company formerly known as Maersk Oil Qatar, Al Shaheen Field, Echo Location Offshore, Qatar

Date : January 2015- September 2018

JOB DESCRIPTION

Give support to Supervisor with regards to accomplishing tasks or technical issues.

Performs skilled rotating equipments maintenance at an advanced level on Offshore Super Complex. Safely leads and directs assigned workforce (technicians, vendors, subcontractors) consisting of related skills, as well as participates in the workforce tasks. Work includes but is not limited to maintenance of gas turbines, gas compressors, gear boxes, diesel engines, air compressors, various pumps, mechanical seals, Dry gas seals, Fan coolers, auxiliary systems of rotating equipments, utility packages and material handling equipments.

Leading technicians and vendor representatives during preventive, corrective, breakdown, shutdown, turnaround maintenance

Carry out troubleshooting and preventive maintenance of Mechanical Equipment such as Pumps, valves, compressors, generators and others.

Installs, removes, inspects and repairs mechanical spare parts like bearings, seals, Dry gas seals etc. on typical rotating equipment.

Provide comprehensive and detailed e-logbook handovers at the end of each shift and crew change.

Makes recommendations to continuously improve the method of work, for safe execution.

Uses and ensures the use of proper PPEs by self and the team members.

Acts as a member of the emergency team and participates in firefighting when required.

Maximize the reliability and availability of plant equipment.

Designate and monitor the work of personnel in order to achieve safe and quality jobs.

Preparing permits for the jobs and doing toolbox talks before starting the jobs.

Make notification in SAP for any outcomes of preventive maintenance.

Assigned in Campaign Team, transferring from platform to another (including satellite and unmanned platform) and doing preventive maintenance and troubleshooting of Mechanical Equipment.

Position : MECHANICAL TECHNICIAN

Department : Maintenance Department

Location : Maersk Oil Qatar, Al Shaheen Field, Echo Location, Offshore, Qatar

Company : Maersk Oil Qatar

Rotation : 28 days on - 28 days off

Date : November 2009- November 2014

JOB DESCRIPTION

•Repairs and maintains machinery and mechanical equipments such as pumps (rotary and reciprocating), air compressor package, stock tank compressor package, gear boxes, all packages found in process platform such as nitrogen generator package, hypochlorite generator package, fuel gas package, glycol regenerator package, chemical injection package, vessels such as test separator, inlet separator, oil water separator, final stage separator, heating and cooling medium expansion vessel, tanks such as open drain tanks, closed drain tanks hazardous and non-hazardous, wellhead control panel, filters, strainers, exchangers, emergency generator, fire water pump, potable water maker, pig launchers and receivers.

•Preparing permits for the jobs and doing toolbox talks before starting the jobs.

•Carry out preventive mechanical maintenance and troubleshooting activities of the plant equipments stated above including HVAC, desalination plant and sewage system. Follow the procedure found in the preventive maintenance checklist.

•Assisting Production Operator for their jobs in Wellhead and Choke Valves.

•Attend toolbox meeting to establish scope of work activities such as safety requirements, permit to work, identify the risk and discuss on how to reduce the risk.

•Aligning motor and pumps using fixtur laser alignment.

•Assist turbine technician doing preventive maintenance and troubleshooting of Siemens gas turbine (SG 700) including gas dehydration.

•Assist crane specialist in performing repairs and functional test of lifting equipment including preventive maintenance of the Seatrax and Hydralift crane.

•To participate in conditioning monitoring checks on machinery and notify any malfunction and defects to the Lead Mechanical Technician.

•Changing and cleaning liners and dummy in hydrocyclone.

•Assist production operators for start up or bean-up of wells.

•Double checks the isolations or tagging made by production operators before doing the mechanical jobs to ensure safety.

•Work safely with H2S.

•Participate in the companies training and competency assessment program

•Ensure that all information, written and verbal obtained in the course of the work is handled in strict confidence.

•Follow all company policies, procedures and local by laws when completing task.

•Member of emergency team: previously assigned as evacuation officer, Fire and stretcher team member.

Position : MECHANICAL COMMISSIONING TECHNICIAN

Company : Maerks Oil Qatar

Department : Commissioning Department

Location : National Petroleum Construction Company

Plot No. 71, St 7, Zone 6,Mussfah West 5, Mussafah Industrial Area,

Abu Dhabi - United Arab Emirates

Rotation : 42 days on - 42 days off

Date : November 2008- November 2009

JOB DESCRIPTION

•Member of commissioning team during the construction of Maersk Oil Qatar: Gulf Alpha (GA) platform, Gulf Delta (GD) platform, Echo Delta (ED) platform, Bridges, Flares and Jackets in Mussafa, Abu Dhabi, National Petroleum Construction Company (NPCC) as a contractor from November 2008 to November 2009.

•Inspections of pumps and motor alignment using fixture laser alignment.

•Checking of vibration and temperature of motors and pumps.

•Checking of measurement layout of all packages, vessels, tanks, filters, motors and pumps, turbines, air compressors, based on the equipment plan.

•Internal inspection of all the vessels such as test, inlet, oil water, slug catcher, final stage separators, tanks such as heating and cooling medium top-up tank, non-hazardous open drain tank, closed drain tank.

•Witnessing hydro testing of carbon steel pipes, stainless steel pipes, fiber glass reinforce plastic (GRP) pipes.

•Checking all valves fasteners using ferrite tester in accordance to Maersk International Technical Standard (MITS) and P&ID.

•Inspection of deluge lines for blockage and punch listing

Position : ON - CALL INSTRUCTOR

Department : Training Department

Location : A.S. Fortuna St., Banilad, Mandaue City, Cebu, Philippines

Company : Oilwell Drilling Technology Development Center (ODT)

Date : June 2008 - October 10, 2008

JOB DESCRIPTION

Teaching Basic Oilwell Drilling Operations

Position : UNIVERSITY INSTRUCTOR

Department : College of Education

Location : Bayawan – Sta. Catalina Campus, Bayawan City, Negros Oriental

Company : Negros Oriental State University (NORSU)

Date : June 2004 – March 2008

SUBJECTS HANDLED:

College Algebra, Trigonometry, Analytic Geometry, Matrix Theory, Calculus 1 &

Position : MAINTENANCE ENGINEER

Department : Sugar Mill Factory

Location : Sta. Catalina, Negros Oriental, Philippines

Company : HeminioTeves and Company Incorporated (HTCI)

Date : June 2002 – March 2006

JOB DESCRIPTION

Carry out routine maintenance work and respond to equipment faults.

Diagnose breakdown problems

Carry out quality inspections on jobs.

Deal with emergencies, unplanned problems and repairs.

Monitor and control maintenance costs

Improve health and safety policies and procedures

Fit new parts and make sure equipment is working correctly

Ensure there is continuous cover of the machinery and equipment in case of breakdowns.

Repair and perform preventive maintenance of emergency generator, water treatment plant, mill and boiler and Steam Turbine.

Aligning motor and pump using dial indicator and feeler gauges.

Assigned in Machine and electrical shop.

Doing daily routine job of emergency generator, water treatment plant, mill, boiler and Steam Turbine.

Participate in conditioning monitoring checks on machinery and notify any malfunction and defects to maintenance supervisor.

Comply with company safety guidelines and procedures.

ON THE JOB (OJT) TRAINING

HerminioTeves and Company Incorporated (HTCI)

Sugar Mills

Assigned in Mill and Boiler Department

Sta. Catalina, Negros Oriental

March 1999 – May 2000

TRAININGS AND SEMINARS

BALANCING OF ROTATRY MACHINERY, BRM

Hayward Technology Middle East

Ras Al Nakhl, ADNOC, ABU DHABI

Aug. 19-23, 2024

ADVANCE GAS TURBINE MAINTENANCE AND TROUBLESHOOTING

ABU DHABI ENERGY BUSINESS CENTER

July 15-19, 2024

H2S Level 2

JAHEZIYA

Tawazon Safety Security and Disaster Management City

Abu Dhabi, UAE

Aug. 22, 2023

Advance First Aid

JAHEZIYA

Tawazon Safety Security and Disaster Management City

Abu Dhabi, UAE

June 15-17, 2023

OFFSHORE EMERGENCY RESPONSE TEAM MEMBER (OERTM)

Das Island, ADNOC FACILITY

Abu Dhabi, UAE

April 5-8, 2023

T-FOET

Tropical Further Offshore Emergency Training

JAHEZIYA

Tawazon Safety Security and Disaster Management City

Abu Dhabi, UAE

Sept. 8, 2021

SAP TRAINING

Maersk Oil Qatar

Al Jazi Tower

Doha, Qatar

FURTHER OFFSHORE EMERGENCY RESPONSE TRAINING MEMBER

Qatar International Safety Center (QISC)

Doha, State of Qatar

August 19 – 20, 2015-08-25

CONTROL OF WORK (PERMIT TO WORK)

Maersk Oil (Operations Department)

Radisson Blu, Doha, Qatar

March 8-10, 2015

HELIDECK ASSISTANT – INITIAL TRAINING (HAD-IT)

Consolidated Training Systems Incorporated

CTSI

Tanza, Cavite, Philippines

Feb. 16-18, 2015

LASER ALIGNMENT

Fixture

Radisson Blu, Doha, Qatar

Sept. 17-19, 2014

H2S/SCBA

Enertech Aviation and Maritime Academy

Doha, State of Qatar

Aug. 7, 2014

HELIDECK TEAM MEMBER

HDTM

Qatar International Safety Center (QISC)

Doha, State of Qatar

Aug. 9-12, 2014

OFFSHORE EMERGENCY RESPONSE TRAINING MEMBER

Qatar International Safety Centre

Street No. 45

Salwa, Industrial Area Doha, Qatar

EMERGENCY FIRST AID AND WORK

Qatar International Safety Centre

Street No. 45

Salwa, Industrial Area, Doha, Qatar

June 20, 2013

RISK ASSESSMENT TRAINING

Velosi

Radisson Blu, Doha, Qatar

May 6, 2013

P2: INTRODUCTION TO PRODUCTION FACILITY OPERATIONS

John M. Campbell and Company

PetroSkills Facilities Training

Radisson Blu, Doha, Qatar

March 29-April 2, 2013-04-11

H2S/BA (MAERSK APPROVED)

Enertech Aviation and Maritime Academy

Doha, State of Qatar

Sept. 15, 2010

PROCESS SAFETY

Mercure Hotel

Doha, State of Qatar

Sept. 6 – 7, 2010

OIL WELL DRILLING TECHNOLOGY DEVELOPMENT CENTER

AS Fortuna St. Mandaue City

Cebu Branch, Philippines

April – May 2006

IADC RIGPASS ORIENTATION AND BASIC SAFETY AWARENESS (INCLUDING SLINGERS AND BANKMAN SAFETY MEASURE)

Course Date: April 17-19, 2006

Certificate No: ODT/PH/CTP02-964

BASIC TRAINING PROGRAM FOR DRILLING PERSONNEL

Course Date: April 17- May 16, 2006

Certificate No: ODT/PH/CTP05-964

INTRODUCTION TO BASIC OIL WELL DRILLING TECHNOLOGY

Course Date: April 4 – 29, 2006

Certificate No: ODT/PH/CTP01 – 964

INTRODUCTION TO HYDROGEN SULFIDE (H2S)/SCBA

Course Date: April 20, 2006

Certificate No: ODT/PH/CTP04-965

ORIENTATION ON THE PREVENTION OF MARINE POLLUTION BY OIL

Course Date: April 19, 2006

Certificate No: ODT/PH/CTP – MARPOL – 965

FIRST AID AT OIL AND GAS DRILLING RIG

Course Date: April 21 - 22, 2006

Certificate No: ODT/PH/CTP05 – 965

Contact this candidate