Senior controls engineer
Resume:
Varadharajan L
Number **,Subramaniyam Pillai Layout, Agraharam, Singanallur, Coimbatore - 641105. Mobile: 701******* Email: ****************@*****.***
Objective
Experienced Robotics Engineer with over 6.5 years of experience in Robotics and Automation Industries. Excellent reputation for resolving problems and improving customer satisfaction. Technical skills
• Robot Programming : Yaskawa, ABB, Kawasaki, Universal Robots, Delta, Epson, Fanuc, MCI.
• Vision Camera : Epson CV2, Omron FHV7, Micro-scan, Delta, Panasonic.
• PLC Software : Omron, AB, Delta, Siemens
• HMI Designing : NB Designer (Omron), EXOR, Proface, DOP Soft (Delta), CCW(AB)
• VFD Control : Delta, AB, Schneider
• Electrical : Panel Wiring & AutoCAD Electrical
• Troubleshooting : PLC Programming, Panel Wiring Troubleshooting. Electrical& Electronics & Pneumatics.
Professional Experience
Senior Controls Engineer at ADNA Automation (Coimbatore) from Nov 2021 to till now.
Robotics Engineer at Malles Automated and Robotics system PVT Ltd (Chennai) from Apr 2019 to Nov 2021.
Automation Engineer at MM Forgings Limited (Chennai) from Dec 2016 to Apr 2019.
R&D Engineer at Indo Shell Cast Pvt Ltd (Coimbatore) from May 2016 to Dec 2016. Powder Coating Application:
1) Emerald Jewel Industry India Ltd, Coimbatore:
• Completed the Robotic Silver spraying system by using Epson VTL6 robot along with Kremlin spray unit in Emerald Jewels India ltd, Coimbatore. Time period - Dec 2021 to Jan 2022.
• Software & Device used:
1.PLC- Siemens S7 1400 (Tia V14 software)
2.HMI- EXOR (JMobile Studio)
2) Orbit Coatings, Chennai:
• Completed the Robotic Powder coating system by using 2 no's of Kawasaki RS010NA robots along with Nordson India Pvt ltd team in Orbit Coatings, Chennai. Time period - Feb 2021 to Mar 2021.
• Software & Device used:
1.PLC- OMRON NX1P2 (SYSMAC Studio software)
2.HMI- OMRON NB7W-TW01B (NB Designer)
3) Steel Strips Wheels India Pvt Ltd, Chennai:
• Completed the Robotic Powder coating system by using a Kawasaki RS010NA robots along with Nordson India Pvt ltd team in Steel Strips Wheels India Pvt Ltd, Chennai. Time period - May 2019 to May 2019.
• Software & Device used:
1.PLC- OMRON NX1P2 (SYSMAC Studio software)
2.HMI- OMRON NB7W-TW01B (NB Designer)
Polishing Application:
1) Amara raja Batteries Pvt Ltd, Tirupati:
• Completed the Auto Post Polishing system by using a Dual arm MCI robot to polish the terminals of batteries in Amara raja Batteries Pvt Ltd, Tirupati. Time period - Dec 2019 to Jan 2020.
• Software & Device used:
1. PLC- AB MICROLOGIX 1400 (RS Logix 500)
2. HMI- AB PanelView 800 (CCW)
2
Palletizing Application:
1) Indian Formers Fertilizers Cooperative Limited (IFFCO), Aonla-Uttarpradesh :
• Completed the Robotic Palletizing and Depalletizing system by using a Yaskawa robot to Palletizing & Depalletizing the Boxes from/to Conveyor in Indian Formers Fertilizers Cooperative Limited (IFFCO), Aonla-Uttarpradesh. Time period – Jan 2023 to Feb 2023.
2) Indian Formers Fertilizers Cooperative Limited (IFFCO), Phulpur-Uttarpradesh:
• Completed the Robotic Palletizing and Depalletizing system by using a Yaskawa robot to Palletizing & Depalletizing the Boxes from/to Conveyor in Indian Formers Fertilizers Cooperative Limited (IFFCO), Phulpur-Uttarpradesh. Time period – Feb 2023 to Mar 2023.
3) Indian Formers Fertilizers Cooperative Limited (IFFCO), Kalol-Gujarat:
• Completed the Robotic Palletizing and Depalletizing system by using a Yaskawa robot to Palletizing & Depalletizing the Boxes from/to Conveyor in Indian Formers Fertilizers Cooperative Limited (IFFCO), Phulpur-Uttarpradesh. Time period – Nov 2022 to Dec 2022.
4) Amara raja Batteries Pvt Ltd, Chittoor:
• Completed the Robotic Vision based Battery Palletizing system by using a Kawasaki robot to Palletizing the batteries by using FHV7 Omron Vision camera from Conveyor in Amara raja Batteries Pvt Ltd, Chittoor. Time period - Aug 2021 to Sep 2021.
• Software & Device used:
1. PLC- AB COMPACTLOGIX L18ER (Studio 5000)
2. HMI- AB PanelView 800 (CCW)
3. Vision camera- OMRON FHV7
4.Servo Actuator- SMC LEY controller
5) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Robot Programming Completed in FIAB - Robotic PCB Palletizing system by using a Universal Robots (UR05) robot to Palletizing the PCB from SMT Conveyor at Nokia Solutions and Networks, Chennai. Time period - Mar 2020 to Mar 2020. 6) Amara raja Batteries Pvt Ltd, Chittoor:
• Completed the Robotic Vision based Battery Palletizing system by using a Universal robot UR-10 to Palletizing the batteries by using Vision camera from Conveyor in Amara raja Batteries Pvt Ltd, Chittoor. Time period - Feb 2020 to Feb 2020.
• Software & Device used:
1. PLC- AB COMPACTLOGIX L18ER (Studio 5000)
2. HMI- AB PanelView 800 (CCW)
3. Vision camera- Microscan
4. Servo Actuator- SMC LEY controller
7) Amara raja Batteries Pvt Ltd, Chittoor:
• Completed the Robotic Battery Palletizing system by using a Kawasaki BX 200 robot to Palletizing the batteries from Conveyor in Amara raja Batteries Pvt Ltd, Tirupati. Time period - Dec 2020 to Jan 2020.
• Software & Device used:
1. PLC- AB COMPACTLOGIX L18ER (Studio 5000)
2. HMI- AB PanelView 800 (CCW)
Screwing Application:
1) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Completed the Robotic Filter unit Screwing system by using a Epson (LS6B) robot with the help of FHV7 Omron vision camera to Screwing the Antenna unit by using Deprag controller in Nokia Solutions and Networks, Chennai. Time period - May 2021 to Jun 2021.
• Software & Device used:
1.PLC- OMRON NX1P2 (SYSMAC Studio software)
2.HMI- OMRON NB7W-TW01B (NB Designer)
3.Vision camera- OMRON FHV7
4.Screw driver - Deprag controller
3
2) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Completed the Robotic Antenna Screwing system by using a Delta (DRS 60L) robot to Screwing the Antenna unit by using Deprag controller in Nokia Solutions and Networks, Chennai. Time period - Jan 2021 to Feb 2021.
• Software & Device used:
1.PLC- OMRON CP1E (CX programmer software)
2.HMI- Delta (DOPsoft)
3.Screw driver - Deprag controller
3) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Completed the Robotic Antenna Screwing system by using an Epson (LS6B) robot to Screwing the Antenna unit by using Deprag controller in Nokia Solutions and Networks, Chennai. Time period - Oct 2020 to Oct 2020.
• Software & Device used:
1.PLC- OMRON CP1E (CX programmer software)
2.HMI- OMRON NB7W-TW01B (NB Designer)
3.Screw driver - Deprag controller
4) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Completed the Robotic Filter Unit Screwing system by using UR-10 robot to Screwing the Antenna unit by using Deprag controller in Nokia Solutions and Networks, Chennai. Time period - Aug 2020 to Sep 2020.
• Software & Device used:
1.PLC- OMRON CP1E (CX programmer software)
2.HMI- Delta (DOPsoft)
3.Screw driver - Deprag controller
Gluing Application:
1) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Completed the Vision based Robotic Filter Unit Gluing system by using an Epson (LS6B) robot to Gluing the Filter unit by using Loctite controller in Nokia Solutions and Networks, Chennai. Time period - Feb 2021 to Mar 2021.
• Software & Device used:
1.PLC- OMRON NX1P2 (SYSMAC Studio software)
2.HMI- OMRON NB7W-TW01B (NB Designer)
3.Vision camera- Microscan MV40
4.Gluing controller - Loctite controller
Pick and Place Application:
1) Gautam Technocast,Rajkot, Gujarat:
• Completed the Robotic pick and place system with 7th axis by using Yaskawa GP180 robot to pick the automotive component from pallets and place it to 3 different VTL machines for machining. After that it will pick the component and place it for inspection. As per inspection result the component will place it on pallets in Gautam technocast, Rajkot. Time period - Jun 2022 to Aug 2022.
• Software & Device used:
1.PLC- AB Micrologix 1400 (RSlOGIX 500)
2.HMI- Proface (GP pro)
2) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Completed the Vision Based Robotic Filter Unit Resonator pick and place system by using an Epson (LS6B) robot to Placing the Resonator from Deprag controller to Filter unit in Nokia Solutions and Networks, Chennai. Time period - Apr 2021 to May 2021.
• Software & Device used:
1.PLC- OMRON NX1P2 (SYSMAC Studio software)
2.HMI- OMRON NB7W-TW01B (NB Designer)
3.Vision camera- OMRON FHV7
4.Servo controller – Omron and SMC LEY
4
3) Nokia Solutions and Networks Pvt Ltd, Chennai:
• Completed the Vision Based Robotic Filter Unit Lid Connector pick and place system by using an Epson (LS6B) robot to Placing the Lid connector from Deprag controller to Filter unit in Nokia Solutions and Networks, Chennai. Time period - Mar 2021 to Apr 2021.
• Software & Device used:
1.PLC- OMRON NX1P2 (SYSMAC Studio software)
2.HMI- OMRON NB7W-TW01B (NB Designer)
3.Vision camera- OMRON FHV7
4.Servo controller – Omron and SMC LEY
4) MM Forgings Ltd, Chennai:
• Completed the Robotic pick and place system by using a Fanuc robot to Pick the Hot Component from DQ Furnace to Quenching Tank in MM Forgings Ltd, Chennai. Time period - Feb 2019 to Mar 2019.
• Software & Device used:
1.PLC- OMRON NX1P2 (SYSMAC Studio software)
2.HMI- OMRON NB7W-TW00B (NB Designer)
5) MM Forgings Ltd, Chennai:
• Completed the Robotic pick and place system by using a Fanuc robot to Pick the Hot Component from SMG Press to DQ Furnace in MM Forgings Ltd, Chennai. Time period - Aug 2018 to Sep 2018.
• Software & Device used:
1.PLC- OMRON CP1E (CX programmer software)
2.HMI- OMRON NB10W-TW01B (NB Designer)
6) MM Forgings Ltd, Chennai:
• Completed the Robotic pick and place system by using a Fanuc robot to Pick the Hot plate From Conveyor to DQ Furnace in MM Forgings Ltd, Chennai. Time period - Aug 2017 to Sep 2017.
• Software & Device used:
1.PLC- OMRON CP1E (CX programmer software)
2.HMI- OMRON NB10W-TW01B (NB Designer)
7) MM Forgings Ltd, Chennai:
• Completed the Robotic pick and place system by using a Fanuc robot to Pick the job from Quenching tank to Chute in MM Forgings Ltd, Chennai. Time period - Feb 2017 to Mar 2017.
• Software & Device used:
1.PLC- OMRON CP1E (CX programmer software)
2.HMI- OMRON NB10W-TW01B (NB Designer)
Welding Application:
1) Oriental Plants & Equipements Pvt.ltd, Coimbatore:
• Completed the Robotic Welding system with Froniuos welding source by using ABB robot to weld the automotive components. Time period - Mar 2022 to May 2022.
• Software & Device used:
1.PLC- Siemens S7 1400 (TIA V14)
2.HMI- EXOR (JMobile studio)
Responsibilities:
• Kawasaki, Universal, MCI, ABB, DELTA, EPSON, Fanuc Robot ON line Programming and Off Line Programming and troubleshooting.
• Installation, Integration & Commissioning the Robotic System
• Create Online and offline Program for various brands of PLC.
• Interfacing the robot with Vision camera, Servo, HMI by using PLC.
• Led projects and analyzed data to identify opportunities for improvement.
• Create BOM, Control panel layout Designing, Panel building, Panel wiring.
• Technical Documentation.
5
Education:
BE Mechatronics Engineering 2012 – 2016
Nehru Institute of Engineering and Technology, Coimbatore. Anna University. 8.07/10.0 GPA Higher Secondary Education 2011 – 2012
G.H.S.S., Swamimalai, Thanjavur, Tamilnadu. 88.17% Secondary School Education 2009 – 2010
G.H.S.S., Swamimalai, Thanjavur, Tamilnadu. 93.8%
Academic Performance
• Secured 18th Rank in Anna University 2012-2016 batch. Certification
• Universal robots- E series Core Application track completion
• Universal robots- E series Pro track completion
• Universal robots- CB series Advanced level Programming
• Automation System Engineering – PLC, SCADA, HMI (Siemens, AB, Omron, GE Fanuc, Keyence, Delta and Mitsubishi). Personal Data
Name :
Father name :
Languages :
Varadharajan L
Loganathan S
English, Tamil.
Passport :
Available
DOB : 07 May 1995 ID Proof : P0420478
Address : 17/8, Mela raja veethi,
Swamimalai, Kumbakonam.
Declaration
All the Facts and figures, provided above, are accurate and genuine. Varadharajan L
Contact this candidate