Mig Welder Metal Fabrication
Resume:
SAMSON SUSPENE
Mag/Mig Welder
Slavičín, Czechia
***********@*****.***
SUMMARY
Good morning Sir/Madam.I'm Samson Suspeñe, from Cavite City Philippines currently living in CZECH Republic.i'm willing to apply and be a member a of your company..I'm applying for Welder Fabricator job that you advertise in thru online.i have technical certificate in welding and 10 years of experience in welding or Fabricator station. Using my principles i have learned i create good welds everytime,i am read engineering drawing like, isometric or engineering drawing,and i have completed both heavy metal fabrication,as well as light metal fabrication,,not only a welding or Fabrication,,i know how to use hand tools like grinding, drilling machine,,cnc machine like laser machine and plasma machine tickness of 1mm to 10mm...and also bending machine using plates and pipes for degree...all of them using for my previous experience like tank,base frame,tables,chairs, cabinets and also any special project for costumers needed.. I'm hardworking and take pride in my work so its is important to me that and i produced is high quality everytime and i willing to work long hours when needed for a project.. i believe you will agree that i would great Welder or Fabricator position for your company, please call and chat to contact me,,thank you...i'm waiting to your respond WORK EXPERIENCE
April 2023-Current
Mag/Mig Welder
TVD TECHNICKA VYROBA, A.S
Rokytnice, Czechia
Czech Republic
Car Parts/Carbon Steel/(1mm-12mm)
OTC XD 350 / 500
Address: Maguyam, Silang, Cavite
JOB DESCRIPTION:
*Weld components using manual & semi-automatic welding equipment in various positions(vertical, horizontal or overhead)..
*Test & inspect weldes surfaces & structure to discover flaws.
*Maintain equipment in a condition that does not compromise safety.
*Knowledge of relative safety standard & willingness to use protective clothing(face-shield, gloves, etc.). April 2021-May 2022
GMAW Welder
GLOBAL MAXX CORP
Silang, Philippines
DUTIES AND RESPONSIBILITIES:
*Before starting to work, I clean the area first then you get all the tools & equipment needed
*I will need to get the drawing from the Supervisor.
*I need to check the size & measurement of the plates.
*I will going to grind sharp edges to achieve the proper surface texture.
*Assemble the frame, after that the side covers(left & right), lastly, the back cover.
*Double check the measurement, if there is any adjustment that needs to be done.
*If there is no error or adjustment, you need to start welding the frame, side covers(L & R) & back cover.
*I need to polish all the sharp edges and make sure to double check again if there is any parts that is misweld. TIG) (Stainless Steel/15mm)ARGO 350/500amp.
Address: Biga II, Silang, Cavite
JOB DESCRIPTION:
*Designed in fabrication & welding using (TIG)
*Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand
*Perform TIG and other types of weld based on project needs.
*Operate within safety guidelines & operating procedures.
*Polishing of stainless steel metal components to clean finishes.
*Grind, sand & polish using cloth, hand tools, power tools to ensure a smooth surface, inspects for flaws or cracks. DUTIES AND RESPONSIBILITIES:
*Before starting to work, I clean the area first then you get all the tools & equipment needed.
*I will need to get the drawing from the Supervisor.and check the size and measurement of the plates using in fabrication process.
*I fabricate the production chairs, kitchen sink, tables, cabinet & also pipes (flanges, elbow & reduser) with the measurement of thickness of 1mm-6mm plates & cover.
*Then start welding using the proper filler based on project requirements.
*De-bur and grind metal as necessary to achieve proper surface texture.
*Polishing & cleaning of finished product.
December 2012-December 2014
Welder/Fabricator
KURAMOTO STEEL CO.INC
Hiroshima, Japan
Carbon Steel/1-30mm)YAMATO
Address: Hiroshima Ken, Fukuyama Shi, Japan
JOB DESCRIPTION:
*Assemble steel trusses, tanks& other parts of special project
*Perform all welding position (Flat, Vertical, Horizontal, Overhead) using FCAW February 2019-October 2020
WELDER
DYNA MICRO PREC. TOOLINGS & FAB. INC
Silang, Philippines
*Assemble & full welding of I-beams, double v-cut is applied by oxy-acetylene cutting, a good cut is good for less grind, fabricate A-frame & hook the chain block for lifting &, distortion after welding it has to be grinded partially to produce quality weld inside & out.
*Assigned to go in the field site for installing after all the fabrication works have been done, splice the I-beams by bolting, I would weld I-lifter, bevel it to I-lifter. Welding is critical during this lifting operation so right amperage & weld pudding technique is important.
DUTIES AND RESPONSIBILITIES:
*Fabricate column footer, if the I-beam have braces, beam cross, beam support by these pre-fabrication of trusses it would make us easy to assemble components of trusses but have to establish first the pedestal for column footer to have stable foundation we would use string to have square measure in each corner.
*Welding series of trusses on the top of space frame & bracing it for strength, string is needed from end to end to make a straight alignment.
*After a day of work, I make sure that machine, tools & equipment to be switched off specially tank & hose to avoid disaster.
• Welder Mig Fcaw
December 2007-September 2012
Welder/ Fabricator
MAENO GIKEN INC
Cavite, Philippines
Carbon Steel/Stainless Steel/Aluminum Steel/Galvanized Steel OTC XD 350-500/ARGO 350-500/(1.5-20mm)
Address: FCIE Complex, Dasmariñas, Cavite
JOB DESCRIPTION:
*Designed in fabrication & welding (SMAW/MIG/ FCAW/TIG)
*Fabricate & weld parts of transtrainer & container crane such as platforms, walkways. Pipes & handrails.
*Fabricate & weld special project such as tanks, base frame & beam.
*Responsible in checking & cleaning of item after welding. DUTIES AND RESPONSIBILITIES:
*Assembly and full welding of structural parts of transtainer, container and shipping crane.
*Fabrication and full welding of casing and gutter of boiler.
*Fabrication and full welding of structural parts of car parking system underground and puzzle type.
*Fabrication and full welding of different kind and size of tanks.
*Assemble and full welding of base frame and beams according to customer's requirements. I hereby certify that the above information is true and correct. Samson A. Suspeñe
Applicant
• Welder Mig Fcaw Tig, Fabricator
EDUCATION
International Training Center
Autocad Basic Nov.3-Apr.1,2016
MATERIALS/ TOOLS/ EQUIPMENTS:
*OTC XC - 350 OTC XC - 50
*OTC XD - 350 OTC XD - 500
*ARGO - 350 ARGO 500
*Meter, L-Square, Tape measure/Mig Wire
*Grinding disc/ cutting disc, Angle grinder (small & big)
*Spray gun/ roller paint/ paint brush/ steel brush
*Personal materials such as welding mask, long sleeve shirt, jeans, arm cover, safety shoes, goggles, gas mask, head mask & welding gloves.
Secondary: Cavite Institute
1994-1998
Vocational: TESDA NCII (SMAW)
Oct.26, 2019 - Oct. 25, 2024
WELDING SKILLS:
* Cutting process
* Shielded metal arc - SMAW - all position
* Flux core arc - FCAW - all position
* Gas metal arc - GMAW - all position
* Gas Tungsten arc - GTAW - all position
1988-1994
Biga Elementary School
Biga, Philippines
Primary: Biga Elementary School
1988-1994
SKILLS
Welding Hand Tools Blueprints Project Planning AutoCAD P Safety Standards 1994-1998
Vocational
Cavite Institute
Silang,Cavite
2003-2016
International Training Center
Iba, Silang, Philippines
Equipment Maintenance/Repair Operations Processes Housekeeping/Cleaning Polishing Machine Tool
LANGUAGES
English - Intermediate
WORK AUTHORIZATION
I am authorized to work in the following countries: Testing
Component Assembly
Contact this candidate