Quality Control Production Supervisor

Resume of Michael Harrison

PERSONNAL DATA: Michael Dean Harrison

Health: Excellent

Phone: 734-***-****

JOB OBJECTIVE:Seeking position in Quality Control field or Manufacturing Engineering

or Quality/Production Supervisor.

EDUCATION: Our Lady of the Lake Graduation Date: 05/04/78

Prudenville, Mich. Studies consisted of general private school classes.

Houghton Lake High Graduation Date: 6/12/81

Houghton Lake, Mich. Studies consisted of Machine shop,drafting.

Kirtland Comm. College Graduation Date: 8/31/81

Roscommon, Mich. Received one year certificate

In Mechanical and Electrical Drafting.

Northern Mich. Unv. 9/22/81 to 5/26/82

Marquette, Mich. Studies consisted of Mechanical Engineering.

Central Mich . Unv. 9/22/82 to 12/17/83

Mt. Pleasant, Mich. Continued Mechanical Engineering

Detroit Eng. Institute 09/25/85 to 09/26/87

Detroit, Mich. Graduated with a gpa of 3.47.

Received Electronics degree . Earned

several certificates for being on

Deans list and attendance and achievement awards.

Studies consist in the area of Robotics,Integreted

Computer Technology.

Macomb Comm. College 1/07/87 to 6/15/88

Warren, Mich. Received certificate in Statistical Quality Applications.

Work Experience:

Franklin Forge Inc. Date: 04/01/79 to 09/15/81

West Branch, Mich. I started as a coop trainee in the tool room.

Trained on surface grinders, milling machines,

bridge ports and lathes . Learned the use of

inspection gauging and blue print reading .

Rebuilt damaged forging dies.

Rahar Inc. Date: 6/10/81 to 3/10/83 Manufacturer of Gm,

Prudenville, Mich. American Sunroof and Taylor door products.

I worked in the Quality Lab certifying check

fixtures on the cmm . Also managed gage

calibration records .

S&J Grove Inc. Date: 4/1/83 to 10/30/84 Title: Q.C. Inspector

Performed all duties of a quality inspector and

trained on various inspection machines and

equipment . Parts were manufactured for G.M.

and Bell helicopter,Ford manifolds.

ICR Inc. Date: 1/15/85 to 10/18/87 Duties: Layout

Higgins Lake, Mi. Draftsman. I drafted and red lined electrical

wiring diagrams for Gm dashboards and

machine prints for GM/Saginaw steering

Division.

Micro Manufacturing Date: 11/1/87 to 9/12/88 Duties: Quality

Mt. Clemens, Mich. Control Technician. Programmed Cmm

machine and performed line inspections .

Manufactured gears and water pump impellers

for Detroit Diesel and Allison .

MSI Prototype & Eng. Date 9/20/88 to 2/6/2000 Duties: Cmm

Warren, Mi. Programmer and layout technician . Worked

in body panel design and build up of

prototype vehicles from automotive to

tractor parts & satellite dishes . Sheet Metal

fabrications were a big portion of our

industry. I used cad/cam packages to do off-line

programming for Cmm’s. I performed duties

as a department leader over six other

inspectors . Full filled all customers required

documentation for submissions . We also

maintained two production facilities in

different locations . I assisted and

maintained relationships with engineering

and initiated several Quality systems for QS certifications .

C. Armstrong & Assoc. Date: 5/10/86 to 9/1/94 Duties:Electronic Tech/Auto-cad

Detroit, Mi. Operator. This was a state of the art Parking

lot marking business. I managed a night

shift crew. Designed parking lot layouts,

maintained paint equipment. Designed a

painting apparatus to enable engine free

capabilities guided by laser technology.

Fabricated and assembled into a working

functional painting machine.Also programmed a

Sign-Mate router to cut out stencils out of wood or plastic.

Iverson Industries Date 2/14/2000 to 09/10/2008: Quality

Wyandotte, Mich. Control Manager/ technician.Programmed Pmm

machine and run the entire Qc Dept at

our Machine tool Div. Maintained ISO-9001/TS16949

Operating system . Work with two

production divisions in maintaining

our quality systems . I was also involved

with Engineering in design applications

for my division . We machined high

tolerance parts for Fanuc Robotics as well

as Automotive parts for Dana Corp,

Arvin Meritor, and General Motors,

Bell Helicopter,Boeing Aircraft.

We design and manufactured machines

for our production shops as well as for our

customers . We serviced Guardian glass

machines for there glass factories.

I was responsible for all the quality situations

at our division as well as customer contacts.

Program cmm using PC-Demis. Portable Cmm

is a Pharo-arm with cam-2 measuring soft-ware.

Involved in all job launches from start to finish

including design of holding fixtures,cost,quoting

all job specific issues.Maintained all ISO daily

functions and job training,timing,scheduling,job

cost,internal problems to every day shop floor and

field failures.I have exstensive mechanical assembly

experience as well as electronic assembly in building

robots,machines,mechanical testing fixtures.I did hands

building&assembly of custom machines and all testing for

customer runoff of production of parts with cert data.

General Dynamics Date 7/31/2009 to 7/1/2011: Skilled Trades/Quality Control

Eynon,Pennsylvania Worked in Gage Lab operating DEA Cmm,Romer-Arms,Wenzel Cmm

operating PC-Demis 3.7 and Open-Demis software.Duties also consisted

of repairing gages,calibrations on fixtures.Parts were machined and

certified to Government standards.All plant work was for Defense

equipment and vehicles,Robots to Tanks and numerous Fighter vehicles.

The company is very team orientated and has a fifty five

year structure base.I was a Union Member after my 90 day probation.

Ebersphaecer Date 12/1/2011 to 6/15/2013:Cmm Programmer/Operator.I work on Automotive

Wixom,Michigan Exhuast and Emission components.I am currently using Power-Inspect soft

-ware programming using 3-D cad files,performing PPAP's,setting up weld

cells for Robotic welding processes.I also am in charge of all calibration

for my division using Gage-Trak soft-ware.

AM General Date 6/18/2013 to 5/8/2014: CMM Programmer/Operator.Quality Department

Livonia,Michigan utilizing a 30'foot DEA Cmm using PC-Demis 2012 V43 interfaced with Data

from SAP system certifying Military Defense parts and vehicles.

World Tek Ind. Date 5/12/2014 to 3/17/2020: CMM Programmer/Operator PC-Demis on Brown&

Romulus,Michigan Sharpe Global and Romer-Arm in the Marine,Locomotive,Military Gas&Oil

Industries.I performed all Quality functions on new launches from start to

in-process production run studies setting up fixtures with proven processes

on CNC machines for prototype and production operational runs. Performed

Supervisory task on daily basis for the QC dept for two shifts along

with training and managing of all department functional ISO-9001

requirements including customer requirements.

Complete Prototype Date 3/6/2021 to 2/20/2023: CMM Programmer/Operator using PC-Demis 2017.

Fraser,Michigan Performed cmm layouts for the automotive,Military,and machine building

Industries.Completed fixture certifications,GRR runoffs,and complete

prototype PPAP submissions for the customers.

Special Skills: I have Cad background skills and I have operated and programmed

several different make Cmm machines. I have background

experience in several computer programs, Math, Electronics,

and all facets of inspection gauging and or machines.I have mechanical

Build and test experience with robots,machinery,work cell equipment.

Experience on computers using Gage calibration softwares,Microsoft

Excell spread sheets,Microsoft Word, Email Outlook in the office

atmosphere.

Special Comments: I take pride in every job I pursue. I work well with others and

believe in teamwork.I enjoy attending learning seminars and work

fairs to enhance my skills for the future in new technologies and

manufacturing principles.I completed on the job training in Diversity,

safety training,MSDS procedures,Kiosk training.

Contact this candidate