Solids Control

Tevin J. Lee

BEAUMONT/HOUSTON, TX

EMAIL: **********@*****.***

CELL: (409) 767 - 6323

AGE: 29

SUMMARY

Refinery, Plant, Drilling Rig: Control Panels; Heavy Equipment (Excavator, Front End Loader, Articulated Dump Truck, Bull Dozer, Forklift); Process/Closed Loop System; Pumps; Centrifuges; Vertical Dryers;; SAP systems; Motor Control Centers; Silo Product; Air Classifying/Jet Mills; Hot/Cold Work Permits; JSA; Quality Control; Crane Rigging; Grinding; Power Tools; Respirators; Dispatching

NOV. 2023 - PRESENT

TEXAS SOLIDS CONTROL SERVICES - HALLIBURTON

● Rig Up / Rig Down Solids Control Equipment

● Process Oil Base / Water Base Fluid through Centrifuges

● Maintain equipment: Clean, Grease, Ensure oil and fluid levels are where they need to be

● Take Samples daily: Centrifuge Effluent / Cuttings, Rig Shaker, Drying Shakers, Active System, & Flowout System

● Day & Night Reporting using Microsoft Excel / Outlook: Well Information, Well Intervals ( Surface, Intermediate, Production, Completion), Daily Summary of Rig Activity (Drilling Lateral / Curve, Sliding, Reaming, Tripping In / Out of Hole, Circulating, Cementing / Casing etc.)

● Run Barite Recovery

● Run Lynx 40s & GTech Centrifuges

JUL. 2022 - NOV. 2023

AIP ENERGY - STALLION OILFIELD SERVICES

● Rig Up / Rig Down Solids Control Equipment

● Process Oil Base / Water Base Fluid through Centrifuges

● Maintain equipment: Clean, Grease, Ensure oil and fluid levels are where they need to be

● Take Samples daily: Centrifuge Effluent / Cuttings, Rig Shaker, Drying Shakers, Active System, & Flowout System

● Day & Night Reporting using Microsoft Excel / Outlook: Well Information, Well Intervals ( Surface, Intermediate, Production, Completion), Daily Summary of Rig Activity (Drilling Lateral / Curve, Sliding, Reaming, Tripping In / Out of Hole, Circulating, Cementing / Casing etc.)

● Call dispatch for Trucking to Load Cuttings into End Dumps AUG. 2021- JUL. 2022

DWM CONSULTING - (STAGE 3 SEPARATION, STALLION OILFIELD SERVICES, REPUBLIC SERVICES)

-SOLIDS CONTROL TECHNICIAN / CENTRIFUGE OPERATOR

● Rig Up / Rig Down Solids Control Equipment

● Work Tank Farm.

● Work Shaker / Troph / Open Top setups

● Process Mud from Active system or Drying Shaker tank

● Transfer mud from DS tank to Agitator for Recovery

● Assist Derrickhand when able; Check Mud Weight / Viscosity from FlowOut & Active system, Spray down, Check for holes & change out Rig Shaker Screens

● Divert flow between Rig Shakers

● Knowledge of Pit Volumes, Hole Volumes

● Operate Excavator & Front End Loader

● Operate Bulldozer & Dump Truck at Landfill (Daily Greasing of Bearings, Cleaning Air Filters,

& Adding Diesel)

● Lockout/Tagout, Turning On/Off Breakers in MCC Housing

● Call for dispatch of Trucking Services for Haul Offs

● Daily Inspection / Topping low fluid levels (Oil, Diesel)

● Service Centrifuge Weekly / Grease daily: Take Pictures of Bowl, Plows, Scrapers, Ponds, Gear Box, Belts, & Grease Points

● Take Samples daily: Centrifuge Effluent / Cuttings, Rig Shaker, Drying Shakers, Active System, & Flowout System

● Day & Night Reporting using Microsoft Excel / Outlook: Well Information, Well Intervals ( Surface, Intermediate, Production, Completion), Daily Summary of Rig Activity (Drilling Lateral / Curve, Sliding, Reaming, Tripping In / Out of Hole, Circulating, Cementing / Casing etc.)

JUN. 2021 - AUG. 2021

Strom Engineering - Chemical Operator (Batch Plant)

● Ensure PPE is worn at all times.

● Start work orders & fill in daily paperwork.

● Use forklift to setup raw materials needed for batch.

● Replace propane tanks on lifts.

● Mix powders & chemicals per customer request; Kerosene, Luperox, Calcium Oxide, Lithene, Diisononyl phthalate, etc.

● Make Liquid transfers to batch while mixing.

● Monitor vacuum pressures for Mercury output.

● Make adjustments as needed using control panel.

● Maintain temperature of batch.

● Take samples to QC Lab for testing.

● Use scales for weighing product.

● Clean out Magna totes/ label drums for dumping & distribution.

● Record vacuum times & pressures, sample times, temperatures, use before date & manufacturing dates for all filling orders.

● Clean out mixers for next product.

● Fill in Hourly Production Log.

● Flag batches as: Quarantine, Scrap, or Rework per QC. JUL. 2020 - NOV. 2020

McDermott Inc. (Total Ethane Cracker Project) - Construction Laborer

● Ensure PPE is worn at all times.

● Maintain cleanliness around site.

● Use of 2 to 4 inch hose to clear rainwater from ditches, sewers, and sump.

● Place Red Danger tape/ Yellow Danger tape barricades where there is work.

● Confined space trained for entrance to clean & pump water. NOV. 2019 - JUN. 2020

Jacobs Engineering (Contractor) ExxonMobil Polyethylene Plant - Operator

● RailCar Switchman, Railcar Loader, & Railcar Washer.

● Fill in round sheet before starting work when in the Wash or Loading.

● Ensure gauges & temperature readings on equipment are at the proper rate.

● Cut all seals on empty Railcar for washing & drying.

● Complete Hopper Car Preload Inspection sheet after cleaning.

● Call for cars to be spotted by Switchman on shift, using radio.

● Weigh Railcars on scale for tare weight.

● Load cars with pellets or granular (powder) product from silos.

● Collect samples from compartments for Quality Control lab.

● Completely seal loaded Railcar for Outbound transport.

● Fill in all Compound Loader paperwork for finished loads.

● Write Work Permits for Exxon or Contractor employees for work to be done (Maintenance on pumps, spreaders, pipes, valves, etc.)

● Sign off on tags for work permits (Primary Isolation Point, Lockout/Tagout, etc.)

● Use of company iPad/touchscreen device for YardMaster (Railcar inventory)

● Communicate with Engine Driver to make rail switches & couple or breakaway railcars. Connect hose & open valve to apply air from one car to the other. JAN. 2019 - JUN. 2019

Invista (Contractor) Dupont Chemical Plant - Operator

● Operate forklift to receive shipments of orders.

● Maintain Inventory in warehouse; Bolts, Gaskets, Steam Traps, Pumps, Gauges, Flanges, (all equipment related to Plant Processes)

● Use of handheld scanner or computer to complete SAP.

● Communicate with Plant Operators/ Personnel on orders shipped to warehouse.

● Perform check on all inventory once weekly.

● Resolve any issues via telephone to stores or customer.

● Palletize parts & components no longer needed for plant operations.

● Complete manifest on orders being returned to stores.

● Organize warehouse material.

● Complete permits for Contractor work (usally electrical). DEC. 2017 - OCT. 2018

A. Schulman ICO Polymers Distribution Plant - Production Operator, Cryogenic Processor

● Attend safety meetings.

● Wear steel toe boots, respirator, gloves, & hearing protection.

● Maintain Feed Hoppers, Sifters, processing machines, etc.

● Work with Ambient Mills, Jet Mills, Air Classifying Mills, etc.

● Ensure circulation is steady through feed system.

● Label bags for processing.

● Adjust setup of digital panels for correct circulation.

● Clean Cooling Augers & Reheat Augers of Liquid Nitrogen.

● Perform a total clean on Mills for new Work Orders.

● Sort stocks of engineered plastics & specialty powders.

● Operate Front End Loader to hang products for mixing.

● Fill drums with classified chemicals & stack on pallets.

● Fill sacks with chemicals using process machinery & stack on pallets for distribution.

● Collect samples of every job being worked to the Lab for testing.

● (Bentone, Sealbond Ultra, Soda Ash, Petrac 215 Wax, etc.) Products for Drilling Fluids & Wellbore stabilizers for the Oil Field.

● Utilize Lockout/Tagout procedures on equipment.

OCT. 2017 - NOV. 2017

Dynamic Energy Services - Solids Control Operator - Oil Rig

● Attend daily safety meeting.

● Ensure PPE is worn; coveralls, steel toe boots, safety glasses, gloves, H2s monitor, etc.

● Perform startup & shutdown of Solids Control equipment; shale shakers, centrifuges, feed pumps, etc.

● Knowledge of drilling operations; drilling, tripping pipe, running casing, cementing, completions.

● Use D.E.S electronics to fill in Prontos Forms.

● Provide daily update of Well Data Information, Delivery Tickets, Haul Off forms, & current drilling operations.

● Sign & fill Trucking Manifests along with Haul Off tickets.

● Work Drying Shaker setup.

● Operate Track hoe.

● Grease Centrifuges & hammer unions.

● Rig up / Rig down solids control equipment.

● Rig up & run Barite recovery.

● Run Vertical Dryers.

● Make appropriate settings adjustments to VFD panels in response to drilling conditions.

● Maintenance equipment using hand held tools; ratchets/wrenches, sledgehammer, etc.

● Cut mud weight on drill bit.

● Communicate with Field Supervisor for daily history, problems if any, rig placement, etc. NOV. 2015 - OCT. 2017

DWM Consulting - Solids Control Operator - Oil Rig

● Attend daily safety meeting.

● Ensure PPE is worn; coveralls, steel toe boots, safety glasses, gloves, H2s monitor, etc.

● Perform startup & shutdown of Solids Control equipment; shale shakers, centrifuges, feed pumps, etc.

● Fill in Job Safety Analysis form before work.

● Knowledge of drilling operations; drilling, tripping pipe, running casing, cementing, completions.

● Communicate with pit hands; transfer fluids from centrifuge through PVC into tanks.

● Use pressure hose to add diesel to circulation to better break apart cuttings.

● Make appropriate settings adjustments to VFD panels in response to drilling conditions.

● Work Grinder/Troph setup.

● Work Dryer Shaker setup.

● Operate Excavator & Front End Loader.

● Grease Centrifuges & hammer unions.

● Cut mud weight on drill bit using small bowl when needed.

● Conduct Retort analysis for report of what flows through solids control system.

● Call for dispatch of end dump hauls to load mud cuttings.

● Assist in rig moves; knowledge of rigging down equipment; placement by crane; knowledge of installing & setup of solids control equipment during rig up; equipment stand, slides, male/female connectors, MCC house cords, pump hoses, ratchet straps, etc.

● Maintenance equipment using hand held tools; ratchets/wrenches, sledgehammer, etc.

● Communicate with Field Supervisor for daily history, problems if any, rig placement, etc.

● Communicate with Service Technicians about equipment if need be. AUG. 2014 - OCT. 2015

Conn’s Distribution Warehouse, - Equipment Operator

● Operate Stock Picker / Forklift / Clamps (electric).

● Fill Inspection Forms before equipment use each shift.

● Check batteries (charge, add water, change)

● Ensure safety harness is fully on in proper manner.

● Locate & pull merchandise from warehouse through picklist using Stock Picker & forklift.

● Stage/shrink-wrap pallets and outgoing product for scan-out of invoice.

● Load trailers with forklift for crossdock shipments.

● Ensure trailers are sealed and ready for transport.

● Assist customers with merchandise pick-up.

● Attend safety meetings with supervisors; following OSHA guidelines. JAN. 2014 - SEPT. 2014

FedEx Ground, - Package Handler

● Unload incoming air trailers.

● Handle heavy & HAZMAT parcels carefully.

● Check for damages/punctures in packages.

● Inspect & record status of forklifts (liquid propane) before shift.

● Ensure eye protection and gloves are worn before handling LP tank cylinders.

● Inspect service valves, fuel lines, gauges, expiration dates, and refuel tanks.

● Operate forklift for unloading pallets from trailers.

● Manually scan merchandise for insurance & location updates.

● Sort shipments using rollers for ground truck distribution.

● Close, lock, and secure trailers.

NOV. 2013 - MAR. 2014

United States Postal Service Distribution Center, - Warehouse Associate

● Process mail for distribution throughout Southern Texas region.

● Inspect, then operate forklift (electric) for unloading APC’s (All-Purpose-Containers) and OTR’s (Over-The-Road) containers and pallets of mail from trailers.

● Set up empty APC’s, OTR’s, and cage bins in staging areas for sortment of incoming mail.

● Work as Processing Machine Operator for other lines of package sortment.

● Scan and sort priority/standard packages on conveyor belts.

● Manually push full containers of parcels at designated times to trailers for outbound distribution.

FEB. 2013 - DEC. 2013

United Parcel Service, - Package Handler

● Unlock trailers for setup of rollers and unloading of parcels.

● Scan packages for location and time updates.

● Sort packages onto conveyor belts.

● Assist loading side of facility to distribute freight onto ground trucks.

● Adhere to safety meetings per shift.

OSHA

CONFINED SPACE

TWIC

FORKLIFT CERTIFIED

EXCAVATOR CERTIFIED

HSE TRAINING

PEC SAFELAND

H2S TRAINING

ISTC TRAINING

REFERENCES

● Keith Solley - DWM Consulting 432-***-****)

● Ted Brack - Mundy Maintenance 409-***-****)

● Sean Boutte / Dept. Supervisor - A. Schulman 409-***-****)

● Jake / Field Supervisor - D.E.S. 713-***-****)

● Andrew Vargas / Field Supervisor - DWM Consulting 409-***-****)

Contact this candidate