Set-Up Assistant Lead
Resume:
CHRIS P TOWNSEND
KENOSHA WISCONSIN 53142
*************@*****.***
OBJECTIVE
• TO SECURE A SKILLED POSITION WITH A WELL MANAGED GROWTH ORIENTED ORGANIZATION
WORK HISTORY:
03/15/23 – PRESENT - MACHINEST/SET-UP /ASSISTANT LEAD CARLISLE INTERCONNECT TECHNOLOGIES FRANKLIN, WI.
● SET-UP DMG/SIEKI HMC 5AXICS.160’s/ 100's and EVO 60’s WITH SEIMINS CONTROLS. CELOS WITH SIEMENS,SINUMERIK 840 SI,
● SET-UP/RUN HURCO MACHINES USING CONVERSATION CONTROLS.
● SET-UP / RUN STAR SWISS MACHINE.
● LEAD 9 OPERATORS.AS FAR AS KEEP MACHINES RUNNING, VERIFIED PROGRAM AND PACKET / PRINTS/GAGES ECT… WERE CORRECT.
● TOOK CARE OF SHIPPING AND RECEIVING UNLOADING PRODUCTS WITH A FORKLIFT, TRUCK OR PALLET JACKS
● RAN THE 5’S TEAM AND DID PRE AUDITS.
● DUMP METAL HOPPERS FOR THE OPERATORS DURING THE SHIFT AND AT THE END
● TROUBLE SHOOT,MAINTENANCE AND HELP OPERATORS CLEAR AND RESET ALARMS 5/29/2022-03/10/23 SET UP /OPERATOR/LIGHT PROGRAMMING HADER-SEITZ NEW BERLIN,WISCONSIN
● SET- UP MAZAK MACHINES WITH HYDRAULIC CENTER REST AND TAILSTOCKS.
● PUT JAWS OR DIFFERENT CHUCKS ON INDICTMENT AND DO INSPECTION SHEETS USING
● VARIOUS OF GAGES
● SET UP/ PROGRAM MORI-SIEKI MAKING LARGE TUBES USING DIFFERENT JAWS OR MANDRELS/ CENTER REST AND OR TAILSTOCK.
● MAINTENANCE THE MACHINES AND ORGANIZE THE CELL AND BACK UP PROGRAMS.
● CLEAN UP OLD PROGRAMS TO MAKE THEM MORE USER FRIENDLY/ MAKE SET UP SHEET THE NEXT TIME.
● WORK ALONE WITH NO SUPERVISION..VERY SMALL CREW.
● CRANE TRAINING AND FORK TRUCK
11/17-5/19- SET-UP/ OPERATOR, MED TORQUE, KENOSHA, WI.
● SET UP, L-20 and M32 SWISS MACHINES.
● WORK ALONE WITH LITTLE OR NO SUPERVISION. WORK AS A TEAM AND HELP OTHER EMPLOYEES TROUBLE SHOOT PROBLEMS AND FIX PROGRAMS.
● GET BAR STOCK AND SET UP THE BAR LOADER, PUT THE MAIN AND SUB COLLECTS IN AND BUSHINGS IN. LOAD THE PROGRAM IN, PUT IN ALL THE TOOL DATA
• PREPARE TO GET ALL THE TOOLS IN.
• GET PART READY FOR, FIRST PC INSPECTION AND FOLLOW THE QUALITY CHECKS AND
• PROCEDURES.
• WORK WITH VERY TIGHT TOLERANCES AND MAINTAIN QUALITY
• USE TOOL ARMS AND DIFFERENT ATATCHMENTS FOR
• RAN MUILTIPLE MACHINES AND TROUBLESHOOT PROBLEMS. 06/14-11/17- SET-UP/ OPERATOR.TECOMET, KENOSHA, WI
• SET UP SWISS MACHINES AND STAR SWISS MACHINES.
• WORK ALONE WITH LITTLE OR NO SUPERVISION. ALSO WORK AS A TEAM AND HELP O THER EMPLOYEES TROUBLE SHOOT PROBLEMS AND FIX PROGRAMS.
• GET BAR STOCK AND SET UP THE BAR LOADER, PUT THE MAIN AND SUB COLLECTS IN AND BUSHINGS IN. LOAD THE PROGRAM IN, PUT IN ALL THE TOOL DATA
• PREPARE TO GET ALL THE TOOLS IN.
• GET PART READY FOR, FIRST PC INSPECTION AND FOLLOW THE QUALITY CHECKS AND PROCEDURES.
• WORK WITH VERY TIGHT TOLERANCES AND MAINTAIN QUALITY.
• EDIT PROGRAMS AS NEEDED AND TIMED THE JOBS FOR THE RATES.
• RAN MUILTIPLE MACHINES AND TROUBLESHOOT PROBLEMS. MADE SUGGESTIONS TO MAKE THE PART RUNS FASTER AND SMOOTHER.
• WORK WITH LIVE TOOLS AND COOLANT THRU DRILLS WITH HIGH PRESSURE TOOLS AND MANY TAPS AND SEVERAL OF OTHER TOOLING, TURNING, SPOT, DRILL, TAPPING, AND S EVERAL OF OTHERS.
• USE COMPARATORS, MICS, CALIPERS AND HEIGHT STANDS, PINS GAGES AND MANY OT HER QUALITY TOOLS TO KEEP QUALITY AND CONSISTANCE GOOD PARTS. 11/12-03/14- PROGRAMMER/OPERATOR, BOHR ENGINEERING, UNION GROVE, WI
• SET UP MORI SEKI LATHE AND WROTE PROGRAMS USING CAPS AND VARIOUS OTHER PROGRAMS.
• WORK ALONE AND LOTS RESPONBILTY TO WRITE PROGRAM SET UP MACHINE AND PACKED AND SHIP PARTS.
• WORK WITH TOOL VENDORS AND OTHER OUT SOURCE MATERIAL NEEDED TO GET JOBS DONE.
• SET UP SWISS CITIZEN SCREW MACHINE AND DID PROGRAMMING AS WELL.
• TURN AND MADE JAWS FOR EVERYJOB AND ORGANIZE THE SHOP TO GET A SYSTEM IN PLACE
10/03-11/12 TEAM LEADER, MACHINEST OPERATOR A, GA PRECISION, FRANKLIN WI.
• OPERATE AND SET UP SEVERAL OF HORIZONTAL, VERTICAL HMC AND VMC AND LATHES CNC.
• EDIT PROGRAMS, CHANGE FEEDS AND SPEEDS.
• READ CMM REPORTS AND MAKE MOVES NEEDED TO KEEP INTO SPEC.
• CHANGE TOOLS, MILLS, USING TOOL SETTER AND IMAGER.
• TRAIN NEW EMPLOYEES AND WORK ON NEW JOBS/SET UPS.
• TROUBLE SHOOT MACHINE PROBLEMS AND FIXED SEVERAL OF COMPLEX ALARMS. 2/02-10/03 MACHINE OPERTOR, GORMAC PRODUCTS, RACINE WI.
• OPERATE AND SET UP SWISS SCREW MACHINES.
• WORK FROM DRAWINGS TO SET UP TURNING, DRILLING, BORING, TAPPING AND THREADING TO PRODUCE A VARIETY OF COMPONENTS.
• USE COMPARATOR, MICROMETERS, ROUNDNESS AND SURFACE GAGES AND OTHER INSPECTION EQUIPMENT.
• INSTALL COLLECTS, BUSHINGS, AND TOOLS ALSO RESPONIBLE FOR GRINDING TOOLS. 3/00-1/02 MACHINE OPERATOR, BOSCH, RACINE WI.
• SET UP,ADJUST AND OPERATE VARIOUS MACHINES
• WORK WITH COMPLEX CLOSE TOLERANCES.
• OPERATE CNC MACHINING, FINISH GRINDING, AND LATHE WORK, DRILLING, BORING, LAPPING AND MILLING.
• USE PRECISION MEASURING INSTRUMENTS AND ADJUSTABLE GAGES TO ASSURE GOOD QUALITY PRODUCTION.
10/97-3/00 MACHINE OPERATOR, DANFOSS, RACINE, WI
• MOVE MATERIAL, SET UP WITH SPECIFIED FIXTURING, TOOLING, SPEEDS AND FEEDS.
• MONTITOR TOOL LIFE, MAINTAIN SPECIFIED TOLERANCES AND DIMENSIONS.
• PERFORM PREVENTIVE MAINTENANCE.
• CNC, EDIT PROGRAMS AND CHANGE OFFSETS TO MAINTAIN QUALITY.
• SET UP AND WORK ON MANUAL MACHINES
• 10/96-10/97 MACHINE OPERATOR, WAXDALE, RACINE, WI.
• OPERATED HIGH VOLUME PRODUCTION LINES.
• OPERATED FORK TRUCK AND DID LINE SUPPLY.
• DID CHANGE OVERS TO THE LINES
ADDITONAL TRAINING
• FLAMMABLE LIQUIDS, LPG AND TOXIC CHEMICALS.
• ISO TRAINING
• CNC PROGRAMMING TRIANING
• FIRST AID RESPONDER CERTIFIED
EDUCATION
• 1994, HIGH SCHOOL DIPLOMA, PARK HIGH, RACINE, WI
• 1996, AUTOBODY AND PAINT DEGREE, M.A.T.C, MILWAUKEE, WI
• 2001, CNC GRINDING CLASSES FOR NEW EQUIPMENT, WAUKASHA, WI
• 2012, CNC PROGRAMING,SET UP CERTIFICATES, GATEWAY TECH,RACINE, WI
Contact this candidate