Cnc Programmer Project Management
Resume:
Stanley Brenton
South Lyon,Mi 48178
Phone: 817-***-****
Email: ****************@*****.***
Page 1 of 2
Objective: Acquire a position in Engineering, where extensive back ground in Design for Manufacturing with Over Twenty Years of Automotive and Aerospace Design Background, Tool and Fixture Design and All Phases of Cutter path programming can be utilized.
Summary of Qualifications:
Manufacturing expertise in areas of Process Engineering, Project Management, Tool selection, Materials research, Production planning and Operator training.
Extensive Background in Freeform Modeling and Solid Modeling for Tool and Fixture Design Die and Mold Design Six Sigma Lean Manufacturing Training. Certificate of Training Geometric Dimensioning and Tolerance 2009. Diversity Training and EH&S Training.
CNC Programming Experience 20 plus yrs. Trained and certified in Grinding, Lathe, Wire EDM, Mill 3,4,5 Axis Programming.
SYSTEM’S EXPERIENCE:
UNIGRAPHIC’S V18, NX Thru NX 12.0 and Post Builder (Master’s Certificate NX Cam) VERICUT 7.3 WIN 98-10, Esprit 2019 training
Education: kelloge community college to year course in automotive engine building
Work History:
Delta Research
CNC PROGRAMMER 12/18/2023 To Present
32971 Capital St. Livona,Mi 48150
Delta is a CNC Job Shop my responsibalities are to provide production programming
using Esprit 2019
Haliburton 10/2019 to 03/2020
Title: Mfg. Engineer 1020 East Beltline Rd. Carrollton
Haliburton is an oilfield tooling supplier worldwide. My position requires CNC
Programming for the production floor including lathe and mills using NX12.
Bae systems May-2018 to Sept-2019
Title: Contract CNC Programmer 163 Rochester Dr. Louisville, KY
BAE is the Gun Smith to the Navy. I support the production floor with Tool and
Fixture design my main task is CNC programing the multi axis Makino machine tools (two 4axis, one T1 5axis) (3) using NX11 updating postprocessers
Curtis Wright Aug-2017 to May-2018
Title: Contract Mfg. Eng. 210 Boiling Springs Rd Shelby NC
This is an Aerospace company subcontracting for Boeing. My duties are Tool and Fixture design and cutter path programming for the shop floor. (Close tolerances +/- .0005)
Software used NX-10
ONE AVIATION July-2015 to April-2017
Title: Contract Tooling Engineer 2503 Clark Carr loop SE Albuquerque. NM
My Duties are Production Tool and Fixture Design to improve the ease of Assembly in the production of the personal jets planes the company builds and sells. We use NX 9.0 software for design.
Self Employed Jan-2015 to July-2015
I provided Design and CNC programming services for Aerospace, Automotive and Appliance industries clients.
ULTERRA Drilling Technologies March-2014 to Jan-2015
Title: CNC Programmer 6811 Corporation Parkway, Fort Worth, TX
My duties are 5axis mill programming and Lathe programming using UGNX 9.0
And verifying the process with Vericut7.3. Ulterra is a World Wide Supplier of deep
Hole drilling heads mainly for the Oil and Gas industry. Also maintaing post processers
Bell Helicopter March-2013 to March-2014
Title: Senior Planner 600 E Hurst Blvd, Hurst, TX.
My duties are Production Planning, Drafting, 3D modeling, Router Modifications and
Bill of Materials changes. Bell Helicopter builds Commercial and Military Helicopters.
I worked at the Drive System Center in Grand Prairie, TX. Where the transmissions are built.NX5
Page 2 of 2
Pittsburg Glass Works July-2012 to Feb-2013
Title: Tool Designer and CNC Programmer (contractor) 5875 New King Ct, Troy, MI
This Company Produces Automotive Glass. My responsibilities are processing design
Data for all of manufacturing and programming for the 5-axis machining center.
L-3 Communication November -2011 to May 2012
CNC Programmer (contractor) 10001 Jack Finney Blvd, Greenville, TX
L-3 Supply’s communication equipment to wide client base. My responsibilities were to provide CNC data and Shop Documentation to the production floor using UGS NX 6. VERICUT and Team Center.
General Electric Aviation March-2011 to November -2011
Tooling Consultant (Contractor ) South 42 Street McAllen, TX 78503
In this position my Responsibilities were Tool and Fixture Design, Process Improvement, 3, 4 and 5axis CNC Programming using UGS NX6 for all Phases of Military and Commercial engine repair.
Bailey Tool & Mfg. June-2010 to March 2011
Cad Cam Designer 906 Mercury Ave Duncanville, TX. 75137
Bailey Tool is a Job Shop supplying a wide variety of Industries, Automotive, Aerospace and Petroleum. My Responsibilities Were Fully Assembled Parametric Solid Modeled Fixtures and Die Designs. Create Detailed Blueprints for the shop floor. Create 2D and 3D CNC programs as needed for Manufacturing. The company specializes in high speed machining. I attended the Die and Mold Process training at the Makino facility in Mason, Ohio.
Pratt & Whitney April 2005 to May-2010
1177 N Great Southwest Parkway
SR. Analyst Methods and Standards Grand Prairie, Tx 75050
My duties are Production Cell Development where in I research and acquire all necessary
Equipment, develop all operating Instructions, Program all CNC equipment to include the
Brown and Sharpe CMM and Train Personnel, Process Engineering, Extensive Tool and Fixture Design, Part Model verification and CNC cutter path programming to support the Production at the DARO Plants. (DALLAS AIRFOIL REPAIR OPERATIONS)
Bailey Tool & Mfg. Feb-2001 to April 2005 Cad Cam Manager 906 Mercury Ave Duncanville, TX. 75137
Bailey Tool is a Job Shop supplying a wide variety of Industries, Automotive, Aerospace and Petroleum. My Responsibilities Were Production Planning Fully Assembled Parametric Solid Modeled Fixtures and Die Designs. Create Detailed Blueprints for the shop floor. Create 2D and 3D CNC programs as needed for Manufacturing. The company
specializes in high speed machining.
Cad Cam Programmer June 1998 to Jan 2001
Cam Tech Corp.
1070 Livernois Troy, Mi. 48083
Cad Design And 3D Surfacing for automotive stamping dies. Cutter path Development and
Documentation for Chrysler, GM and Ford.
Cad Cam Designer Jan.1994 to June 1998
Greenfield Die & Mfg.
8301 Rhonda Dr. Canton, Mi. 48187
Design Verification and Engineering Changes, Process Engineering, 3D Modeling, 2D, 3D Cutter Paths and Wire EDM. Programming for stamping dies, molds, and prototype sheet metal tools.
Contact this candidate