Maintenance Worker Sheet Metal
Resume:
Heath Vick
Maintenance Worker
Contact
Email:
***********@*****.***
Phone:
Address:
Huntsville, Alabama, 35806
Career Objective
I am a outgoing, helpful, careful, team oriented man with a great attitude and plenty of experience in operating tools to get the job done in a safe and timely maner
Experience
Operator
Vicks lawn and landscape, Huntsville, Alabama / Mar 2019 - Present Read schematics and diagrams to monitor machine activity. Leveraged work instructions to assemble components in specified sequence. Masonry Laborer
Vicks lawn and landscape, Huntsville, Alabama / Jun 2014 - Jan 2019 Reviewed workspaces to determine material required. Cut and shaped materials to meet specifications.
Collaborated on construction sites to deliver high-quality work based on needs of clients.
Lifted and carried bricks, concrete blocks and stones using safe techniques. Corrected or reported safety hazards to reduce accidents or injuries. Leveraged pick and shovel to dig, spread and level dirt and gravel. Used equipment and tools to safely perform basic construction tasks. Mixed and prepared cement, bricks and mortar for structures. Utilized chalk lines and tape to outline work area. Removed excess mortar with trowels and hand tools and finish mortar joints with jointing tools, for sealed, uniform appearance.
Calculated angles and courses and determined vertical and horizontal alignment of courses.
Mixed specified amounts of sand, clay, dirt and mortar powder with water to form refractory mixtures.
Applied and smoothed mortar or other mixture over work surface. Examined brickwork and structure to determine need for repair. Removed burned and damaged brick and mortar, using sledgehammer, crowbar, chipping gun, and chisel.
Worked surface to remove scale, dust, soot, and chips of brick and mortar, using broom, wire brush, and scraper.
Broke and cut bricks, tiles, and blocked to size, using trowel edge, hammer, and power saw.
Cutman
North Alabama Aluminum, Huntsville, Alabama / May 2008 - Sep 2013 Climbed ladders, scaffolds and stairs while comfortably lifting extreme amounts of weight.
Cleaned up debris from roof surface and surrounding property. Assisted with installation of partially overlapping layers of material over roof insulation surfaces.
Helped with installation of vapor barriers and layers of insulation on roof decks. Partnered with foreman to promote commercial roofing safety procedures and OSHA requirements.
Coordinated roof membrane, wall flashing and sheet metal installations for building facades.
Performed limited maintenance repairs to exterior walls and sheet metal flashing. Set up scaffolding to provide safe access to roofs. Inspected problem roofs to determine best repair procedures. Installed skylights on roofs to increase natural light inside structures and to reduce energy costs.
Waterproofed and damp-proofed roofs, foundations and basements by painting or spraying surfaces with waterproof coatings.
Attached roofing paper to roofs in overlapping strips to form bases for other materials.
Installed attic ventilation systems, such as turbine vents, gable and ridge vents and conventional and solar-powered exhaust fans.
Prepared surfaces for waterproofing, using hammers, chisels and rubbing bricks. Modified felt, shingles and strips of flashing to fit angles formed by walls, vents and intersecting roof surfaces.
Laid plastic coatings, membranes, fiberglass, or felt over sloped roofs before applying shingles.
Installed partially overlapping layers of material over roof insulation surfaces, used chalk lines, gauged on shingling hatchets and lines on shingles. Flashed strips of metal and shingle over joints to make them watertight. Punched holes in slate, tile, terra cotta and wooden shingles. Attached solar panels to existing roofs, accorded to specifications and without damaging roofing materials and structural integrity of buildings. Crew Leader
Mcclary lawnservice, Huntsville, Alabama / Mar 1999 - Oct 2006 Assigned breaks and job tasks to maximize team productivity. Led and trained lower-skilled employees, enforcing safe and productive work procedures.
Performed quality inspections of completed work to meet company standards. Upheld business practice standards by complying with company rules and regulations. Identified and reported violations or potential hazards to optimize safety. Mentored crew members to drive development and reach company goals. Supervised crews to attain top-quality workmanship, efficiency and employee satisfaction.
Lubricated, cleaned and repaired machinery, equipment and tools. Dug ditches and trenches, backfilled excavations, and compacted and leveled earth to grade specifications using picks, shovels, pneumatic tampers and rakes. Read plans, instructions and specifications to determine work activities. Unloaded and identified building materials, machinery and tools, distributing to appropriate locations according to project plans and specifications. Tended pumps, compressors and generators to provide power for tools, machinery and equipment and to heat and move materials.
Facilitated alignment, movement and adjustment of machinery, equipment and materials.
Measured, marked, or recorded openings or distances to layout areas for construction.
Prepared construction sites to eliminate possible hazards. Performed site activities required of green certified construction practices, such as implementing waste management procedures, identifying materials for reuse and installing erosion and sedimentation control mechanisms. Performed building weatherization tasks, such as repairing windows, adding insulation and applying weather-stripping materials. Mixed ingredients to create compounds for covering and cleaning surfaces. Sprayed water, sand, steam, vinyl, paint, or stucco through hoses to clean, coat, or seal surfaces.
Mixed, poured and spread concrete, using portable cement mixers. Erected and dismantled scaffolding, shoring, braced, traffic barricades, ramps and other temporary structures.
Consolidated, and protect case-in-place concrete and masonry structures. Applied weather-stripping to reduce energy loss.
Joined, align and seal structural components, such as concrete wall sections and pipes.
Installed sewer, water and storm drain pipes, used pipe-laying machinery and laser guidance equipment.
Passed near, in and around work zones.
Operated and maintained air monitoring and other sampling devices in confined and hazardous environments.
Positioned or dismantled forms for pouring concrete using saws, hammers, nails, or bolts.
Provided assistance to craft workers, such as carpenters, plasterers and masons. Mopped, brushed and spread paints, cleaning solutions and compounds over surfaces to clean and provide protection.
Identified, pack and transport hazardous and radioactive materials. Applied caulking compounds by hand or caulking guns to protect against entry of water or air.
Operated jackhammers and drills to break up concrete and pavement. Tended machines pumping concrete, grout, cement, sand, plaster and stucco through spray guns for application to ceilings and walls.
Razed buildings and salvage useful materials.
Ground, scraped, sanded and polished concrete, marble, terrazzo and wood flooring using abrasive tools and machines.
Poured cement and concrete using floats, trowels, screeds and powered cement finishing tools.
Education
Drake technical college
Huntsville, Alabama
Welding technology
Welding(Sep 2011)
Skills
Listen
Learn
Well trained
Helpful
Line Work
Safety Standards Compliance
Inspections and Reviews
Reading and Determining Measurements
Production Documentation
Manufacturing Procedures
Safe Machine Operation
Teamwork and Collaboration
Knowledge of Production Processes
Machine Setup and Shutdown
Customer Service
Attention to Detail
Preventative Maintenance
Valid Driver's License
Materials Assembly
Defect Identification
Effective Communication
Operational Management
Banding Tools Operation
Plant Safety
Machining and Production Standards
Loading and Unloading
Heavy Equipment Operation
Production Work
Quality Assurance
Materials Movement
Warehouse Operations
Machinery Lubrication
Maintenance and Repair
Continuous Improvements
Operations and Logistics
Operating Mowers and Tractors
Preparing Shipments
Visual Inspections
Raw Material Loading
Measuring Tools
Assembly Line Operations
Quality Inspections
Bush Hogging
Skip Loaders
Blade Sharpening
Hand Saw
Pallet Jacks
Asphalt Paving
Certifications
3G mig,flux core, arc
References
References available upon request
Contact this candidate