Quality Control On-Site

Ernest Jimenez

Portland, TX *****

361-***-**** (Cell)

Email:**********@*******.***

OBJECTIVE

To work in a Piping / Mechanical Superintendent position in field development projects where my experience, technical and leadership skills can be utilized to successfully complete projects.

Summary of Professional Experience

Over 35 years of increasing construction experience in technical training, supervision / safety responsibility, quality control & assurance.

Promote safety within area of specialty.

Job Classification: Construction / Commissioning Superintendent, Lead Piping Inspector.

Experience: Fabrication, installation, testing of Piping, structural, on Buildings, Plants, Platforms, Topsides, Jackets, Towers Onshore and Offshore.

Experience: Civil, Mechanical, Pipeline/ Meter-pump facility, Refineries, and LNG.

Experience: Offshore hookups and installation.

Professional / Project Experience

Adolfson & Peterson Senior Superintendent

3M Decatur Water Quality Project / May-19 to Present

Coordinating with three superintendents and various contractors for a $155 million dollar project

Lead morning Coordination meetings with all trade supervision and client representatives. 200 employees on-site.

Provide personal responsibility for working safely within an incident and injury free (IIF) culture.

Ensure project quality based on AP’s quality management programs; create site-specific quality control plans; monitor compliance and performance.

Develop and maintain a mutually positive relationship with the owner and design team throughout the project; understand and communicate the owner’s goals regarding construction to all field team members.

Manage all installation of underground Duct Banks / Piping.

Updating schedule of all activities.

Coordinating concrete slabs, steel installation, Mechanical work.

Problem solving interference and clashes.

Provide technical expertise throughout the pre-construction process and participate in the constructability review.

Interviewing Piping Contractors.

Coordinate with Piping and Mechanical installation.

Randstad Engineering

Graphic Packaging /Wieland Mar-21 to Jan 22

Lead morning meetings and area toolbox talks.

Lead morning Coordination meeting with all trade supervision and client representatives.

Coordinate and schedule system turnover though out the Commissioning process.

Reviewing schedule.

Coordinating with Mechanical and Piping Supervisors to complete systems.

Creating Packages for walk downs.

Supervising Outage work.

Walking down systems.

Witnessing Pump alignments, torquing, flange make up.

Amerapex Corporation

Formosa Plastic Plant Nov. – 2020 – Feb. 26-20201

Draftsman

Participating on their BBSM program.

Walking down lines in the field as per P&ID’s.

Drawing up Isometric drawings.

Reviewing Isometric with P&ID’s.

Bolashak Atyrau LLP

Future Growth Project, Tengiz Kazakhstan – Sept. 4 – 2017 – May 21 – 2020

Infrastructure Mechanical Piping Superintendent

Participating with safety toolbox meetings weekly walkdown.

Reviewing Method Statements, permit to work, JSA’s, weekly work plan, etc.

Providing coordination and support to the project contractor.

Coordinating the Piping and HVAC to follow schedule.

Assisting Contractor in procuring materials.

Problem solving clashes, and other issues.

Coordinated primary steel structural at early stages of building.

Reviewing Isometric and DID (Duct and Instrument Diagrams) drawings.

Reviewing HFD (Hydraulic flow diagrams) drawings.

Swift oil and Gas; Angola LNG Project

LNG Plant, Soyo Angola – Feb. 20, 2010 – Oct 18. - 2016

June 2014 - Construction Superintendent

Safety involvement was our focus throughout the project.

Supervised and provided coordination support to the project contractor in the construction of the plant.

Over seeing schedule with actual work being completed,

Aligning Mechanical, Coating, Civil and Piping Inspector’s with ongoing work.

Signing completed DCN’s. Work Packs, and System Packages.

Coordinated system walk-downs with & turnover to final facility owner.

Feb. 2010 – June. 2014 Welding and Pipe Inspector

Participating on HSE focus.

Observing and monitoring safe work practices.

Participating in daily toolbox meetings.

Perform quality inspections activities in accordance with Inspection and Test Plans (ITP’)

Provide early warning of potential quality problems and the expertise to avoid/resolve them.

Reviewed the hydro packages and witness hydro testing.

Monitored production processes and perform surveillance activities.

Monitored underground HDPE piping.

Participation in Mechanical Completion activities such as pre-walk down checks, accuracy of

Quality Control documents, formal walk downs, and support closure of punch list items.

Monitored commissioning activities executed by contractor.

Swift oil and Gas; MTOE Pipeline Project

Malongo Terminal Angola, África – Aug. 9, 2008 to Dec. 2009

Construction Superintendent

Safety involvement was our focus throughout the project.

Supervised and provided coordination support to the project contractor in the construction of an oil export pipeline.

Installation of a 42” export system (gas turbine, pumps and metering and loading package)

Drove Piles for anchor block and pipe supports, FMC piping, and Pile cluster for Riser installation from offshore.

Civil Road construction, drainage system, culverts, and foundations.

Structure and Piping fabrication and installation.

Coordinated and scheduled equipment for contractor.

Coordinated Tie In Plans.

Commissioning Superintendent

Implemented phased completion and turnover of multiple utility and hydrocarbon systems, utilizing specific testing and sign-off at each phase. Hydrocarbon systems included 42” onshore pipeline, Solar-turbine-driven 56,000 bbl/hr Sulzer pump, 5-run metering skid, and fuel gas supply.

Planned and executed pipe cleaning through water flushing, rapid depressurization blowing, and continuous blowing.

Planned and supervised inerting of existing fuel gas system, tie-in of new fuel gas filter/separator, and nitrogen leak test of modified system.

Planned and supervised flange tightening and final leak test of hydrocarbon piping just prior to introduction of hydrocarbons.

Coordinated utility and hydrocarbon system walk-downs with & turnover to final facility owner.

Conducted Pre-Startup Readiness Review of fire protection system, identified & resolved discrepancies, and placed system into service.

Supervised loading of pigs via temporary launcher, and pigging of 30 km, 42” subsea pipeline.

Supervised operation of external skid to accomplish cleaning and flushing of Solar turbine lube oil, piping and cooler to ISO 14/12 cleanliness.

WisCo Enterprises; Helix (Phoenix Floating Production Unit (SFP) Project)

PKS Fabrication Yard Ingleside, Texas – July. 2007 to Aug. 7, 2008

Project Lead Inspector

Implemented safe work practice.

Participated in daily toolbox meetings.

Fabrication of 8 Modules and 3 Rack Supports.

Monitor and verified fabrication and assembly of Production Modules (structural / process pipe).

Reviewed radiographic film, and other NDE that applied to the piping and structural.

Reviewed the hydro packages and witness hydro testing.

Coordinated the assembly of two Compressor skids.

Project Team Inc; Extension Project

Nisseki Chemical Plant, Pasadena, Texas – Jan. 22, 2007, to July – 2007

Construction Inspector

Monitored and verified installation of structural and process pipe for new construction.

Implemented punch list for systems (piping, structural, and equipment).

Did Safety and Design walk on all equipment and walkways.

Walked down and reviewed packages for final acceptance.

Turner Industries; New Construction and Repair Project

Formosa Plastic Plant; Port Lavaca, Texas --Feb. 2006 – Jan. 2007

Lead Piping Inspector

Overseeing piping system fabrication and installation.

Followed the NDT traceability.

Process pipes included carbon, stainless, and chrome materials.

Pressure test package review and execute.

Repcon Inc.: New Construction

Sun Core Chemical Plant; Denver Colorado – Nov.2005 to Feb.2006

Lead Piping Inspector

Followed the NDT traceability.

Coordinated and scheduled hydro testing.

Walked down and reviewed packages for final acceptance.

Implemented punch lists on systems, and subsystems.

Technip Offshore Inc.; Gulf Marine Fabricators

Aransas Pass and Ingleside, Texas – July 1985 to Nov. 2005

Piping Superintendent (Two Fabrication Yards)

Worked on Top sides, Modules, Jackets, Jack up rigs, Towers, Semi- Submersibles, Spars, Diving Ship, Decks, Fabrication Shop, Plems, Plets, and Manifold Skids.

Planned, Coordinated and Executed manpower and work scope to projects listed above.

Installed Skid structural/piping and related equipment to final project acceptance.

Followed projects offshore for final installation and testing.

Coordinated and prioritized piping from Fabrication Shop to field.

Coordinated and prioritized all disciplines on Decks.

Education / Certificates /Training

Certified Welding Inspector # 05030651 (March 2005 – expired)

Management & Supervisor Training

AWS – American Welding Society

Leadership Training

Interview and Hiring Seminar

Criticism & Discipline Seminar

BBSM Training – Behavioral Based Safety Management

Iso General Awareness Training

Red Cross CPR & First Aid Training

Hazmat Transportation Training

Safety Council Training

CWI Training

Ingleside High School – Ingleside, Texas Diploma

Other Skills:

Bilingual – Spanish and English

Computer Literate

Contact this candidate