Production Technician Ii
Resume:
Avis Gary
***********@*****.***
*** * ***** *** *********, MS 38732
Experience
Production Technician II Baxter Healthcare
May 2023-September 2024
Communicated effectively with department employees, management, and maintenance.
Operated assembly equipment
Set-up machine parameters per operating procedures.
Performed line clearance, quality checks, and required mechanical adjustments to machine.
Ensured raw materials, printing and packaging materials were ready for production.
Used blueprints, specifications, Bill of Materials, and Standard Operating Procedures to ensure product or process acceptability.
Reported abnormalities and corrective action to supervision.
Complied with Good Documentation Practices.
Participated in and complete all required training. Participate in the training of new personnel.
Maintain good housekeeping in the working area and lead 6S responsibilities as assigned.
Performed all other duties and responsibilities as determined by supervision/management.
Assured line is set up with proper materials per the Bill of Material (BOM), verify batch documents are correct per filling schedule and documents are maintained inside appropriate batch folder.
Determined staffing requirements to meet the production schedule and adjust staffing accordingly throughout the shift to meet plant goals.
Initiated batch and exception documents as required needed.
Performed production related task per appropriate procedure and verify all entries were documented correctly during your shift. Execute Batch/Code changes as well as sublots when assigned.
Performed required quality checks per appropriate Packing SOP and document results in Assemble Pack or appropriate batch documents.
Worked with the Production Technician 2 and/or maintenance, monitor all line equipment operations to optimize line performance.
Perform the job duties of other line personnel while relieving for breaks, if applicable. (Supporting batch change process on other lines…etc.)
Communicated with the Filling Line when situations arise that may affect quality, process scrap and/or daily production.
Maintained the Packing area in an audit ready state by using 6S principles daily.
Notified supervision and take appropriate action when a safety, quality, mechanical or personnel issue is identified immediately upon detection.
Documented daily production and equipment issues in shift notes if applicable.
Ensured all personnel performed tasks on your line are properly trained, certified, and/or qualified.
Trained new PTI’s on responsible processes.
Shipping and Receiving Clerk SPM Oil and Gas
July 2021-July 2022
Performed material handling and warehousing functions required in the receiving, processing, sorting, moving, packing, and shipping of parts, materials equipment, and supplies.
Loaded and unloaded incoming stock from trucks
Pull and palletized orders
Operated forklift
Performed other duties as necessary in support of team objectives
Shop Technician Magna Imperior Systems
April 2020-July 2021
Performed semi-skilled production work to assemble cells, including cutting membranes, mesh, spacers and soldering.
Ensure product and process quality and efficiency through appropriate inspection and continuous improvement problem solving activities.
Performed all work in compliance with Magna Imperior Systems
Performed other duties as necessary in support of team objectives.
Hose Assembler Magna Gates Engineering and Services
January 2020-April 2020
Assembled hoses.
Operated hose assembly equipment such as manual saws, automatic saws and hydraulic crimping machines.
Used measuring tools such as tape measures and calipers
Valve Technician Franklin Valves
January 2019-April 2019
Assembled D-711 Valves that contains bonnet, lower plate, slips, plug and an operator.
Knowledge with dashboard reading.
Welding Mechanic Alfa Laval
June 2017 -August 2018
Trouble shoot and repair compablocs, to the heart
Inspect, disassemble, repair, assemble and pressure test units
Follow the quality plan per job to repair products
Removed baffle cages, columns, top head and bottom head
Dye pinned heart of compabloc and nozzles
Tested compablocs : CP-20; CP-30-; CP-40; CP-75 ; CP-400 and CP- 500 up to 600 PSI
Separation Experience: Lynx 40; Lynx 400; and Lynx 500
Forklift Operator Pro Staff (Daikins)
October 2016-February 2017
Used material handling equipment such as cherry picker, stand up lift, sit down lifts and tugger lights to move components and material throughout work area
Assembler TPI Staffing
April 2016-September 2016
Made limit gears and torque switches
Built hand wheel shafts and retainer gears for housing of units
Data entry
Tear Down Technician TPI Staffing
December 2015-March 2016
Disassembled valves, sand blasted and sent for inspection
Assessed parts for defects
Assembler LK Jordan (C&J Energy)
February 2015-April 2015
Used material handling equipment to move components and material throughout the work area
Assembled pipeline for oil/gas
Actuator Assembler Lead Cameron
April 2013-August 2014
Cleaned corrosive deposits from parts using solvents
paint valve fitting and other devices.
Tested valves, actuators and level gauges for leaks.
Used Optimus operating system to process orders.
Used material handling equipment to move components and material throughout work area
Experience with CC20 chokes including blue print reading, triple SSS, keavernerss, CC 70 chokes,stainless steel valves, enkeniels valves, MA’s
Assisted with orientation and teaching other workers proper techniques and procedures.
Ensured that all components have been accepted and correspond to the assembly work order and blueprint while keeping parts organized
Tubing experience with gate valve and actuators
Inventory
Quality Control inspection
Burnett Staffing Cameron
March 2011- April 2013
Cleaned corrosive deposits from parts using solvents, compound 320, 220 and 180
paint valve fitting and other devices; test valves, actuators and level gauges for leaks.
Used Optimus operating system to process orders
Used material handling equipment to move components and material throughout work area; Used material handling equipment to move components and material throughout work area
Experience with CC20 chokes, triple SSS, keaveners, CC 70 chokes, stainless steel valves, enkeniels valves
Ensure that all components have been accepted and correspond to the assembly work order and blueprint while keeping parts organized
Valve Technician Valvtechnologies Incorporated
November 2005 -August 2010
Lapped and painted valve fittings.
Cleaned corrosive deposits from parts using solvents.
Utilized forklift to transport material and parts throughout warehouse.
Mixed compound 320, 220 and 180
Read mills off of endcap and balls
Education
A
Diploma, Ruleville Central High School
Skills
Leadership Data analysis Communication
Organization Problem-solving Inventory
Assembly Documentation Good Manufacturing Practices
Prioritizing Basic Computer Skills
Contact this candidate