Line Cook Assistant Manager, labourer, baker
Resume:
Jared Kot
Keene, NH *****
*****************@*****.***
Authorized to work in the US for any employer
Work Experience
Assistant Manager
KFC / Taco Bell-Keene, NH
October 2023 to Present
I manage and run the coup, I stick the freezers, take inventories, take phone calls, delegate people’s tasks for the day . I open and close. I also am currently helping with running the coup, and I’ve been helping with dishwashing, because our dishwasher quit. Line Cook
Chillis Grill and Bar-Keene, NH
August 2023 to January 2024
I was responsible for running fry station, which includes filling all sauce containers, making sure all freezers are stocked,and making sure we have all plates and containers stocked. I was then responsible for making and plating all food . I then closed down the station when done by cleaning and transferring all cold table
Foods too the walk in, taking out all trashed and sweeping. Assistant Sous Chef
Granita Enoteca-Keene, NH
January 2023 to December 2023
I was responsible for prepping all meats, salads, and breads, and any other prep work that was required of me. I was also responsible for running my station, and I was responsible for training people and making sure they knew all our rules, and regulations. I also would stay late on a regular basis to help with dish, so we can all get out early. I also regularly cleaned all racks, refrigerators and freezers. I made sure everything was labeled, dated, and properly wrapped / stored correctly. I made sure all my station staff utilized fifo. I also was responsible for Breaking down my work area, and making sure it was clean for the next day.
McDonalds Crew Member
McDonald's-Keene, NH
December 2022 to December 2023
I am responsible that all fries are made. I stock the hoppers with fresh fries. I then reset the system and they're ready to go. I keep my fryer oil clean, as well I sweep and mop all the lobby . Then i return too my normal job of scooping fries .
Line Cook/Prep Cook
Applebee's keene n.h-Keene, NH
January 2022 to December 2022
I am responsible for prepping all food required for the shift. I then am responsible for taking tickets and making the food required. I'm also responsible for closing the store, which entails breaking down fryer, grills, flattops, changing oil in fryers, making sure dishes are all done and sweeping and mopping the floor and squeegeeing it.
Crew Member
Five Guys-Keene, NH
May 2021 to June 2022
I work on the front end. I am responsible for making the fries. Making the shakes, and delivering there food. I also am a closer, and am responsible for closing the store. Which includes, taking out the trash, cleaning bathrooms, sweeping and mopping, doing dishes, cleaning the front end, and draining and cleaning the fryers, as well as the grills.
Painter/Laborer
Stebbins painting-Keene, NH
March 2021 to April 2022
I was responsible for setting up all the job sites, I mixed all the paints . I did all scraping and stripping, and any taping required, if any. I used brushes, and sprayers. I then would break down and clean up job site at the end of the day.
Laborer
Hutter construction
March 2015 to September 2015
I ran shingles, removed tar paper and old shingles. I made sure people were stocked up on what they needed, I ran lumber to different job sites. I made measurements and made cuts . I also maintained cleanliness of job sites, sweeping, stacking cut-offs. Accomplishments
I worked very hard and my employers saw this. I exceed in my job, I learned everything that was required of me.
Skills Used
Organizational skills, able to read tape measure, stocking skills, able to figure how much lumber we would need any given day and to order accordingly. Fast and hard worker. Good decision making skills. Labourer
H&S construction
April 2014 to January 2015
Responsibilities
I ran shingles, removed tar paper and old shingles. I made sure people were stocked up on what they needed, I ran lumber to different job sites. I made measurements and made cuts . I also maintained cleanliness of job sites, sweeping, stacking cut-offs. Accomplishments
I worked very hard and my employers saw this. I learned everything that was required of me, and I also learned some stuff on my own initiative.
Skills Used
Organizational skills, able to read tape measure, stocking skills, able to figure how much lumber we would need any given day and to order accordingly. Fast and hard worker. Good decision making skills. Labourer
Vandyke construction-Jaffrey, NH
January 2012 to March 2014
I ran shingles, removed tar paper and old shingles. I made sure people were stocked up on what they needed, I ran lumber to different job sites. I made measurements and made cuts . I also maintained cleanliness of job sites, sweeping, stacking cut-offs. I also did various landscaping jobs . I did raking sand
& gravel, leveling out drainage walls, setting grades, building retaining walls up to code, making drain offs, and laying pipes. I also worked on site at the Subaru dealership bob has. I would clean and detail cars. I would clean garage and fill trailers with car parts for storage. I sorted all parts and inventoried them, and then stored them appropriately.
Accomplishments
I worked very hard and my employers saw this, and that's why I received 3 raises. Skills Used
Organizational skills, able to read tape measure, stocking skills, able to figure how much lumber we would need any given day and to order accordingly. Fast and hard worker. Good decision making skills. Machine operator
Medefab-Jaffrey, NH
May 2011 to November 2012
I molded and inspected medical parts using pin gauges, vision gauge, and micrometers. I was responsible for operating and maintaining my one molding machine. I had to keep hoppers full of proper material, answer any machine alarms, and keep track of temperatures and pressures. I also had to print labels and special package parts as they were medical parts such as catheters, medical tubing, and lab equipment. Machine operator
Teleflex medical-Jaffrey, NH
July 2010 to October 2011
I molded and inspected medical parts using pin gauges, vision gauge, and micrometers. I was responsible for operating and maintaining my one molding machine. I had to keep hoppers full of proper material, answer any machine alarms, and keep track of temperatures and pressures. I also had to print labels and special package parts as they were medical parts such as catheters, medical tubing, and lab equipment. Machine operator
Millipore-Jaffrey, NH
December 2010 to April 2011
I molded and inspected medical parts using pin gauges, vision gauge, and micrometers. I was responsible for operating and maintaining my one molding machine. I had to keep hoppers full of proper material, answer any machine alarms, and keep track of temperatures and pressures. I also had to print labels and special package parts as they were medical parts such as catheters, medical tubing, and lab equipment. Baker
Keene donut kitchen-Keene, NH
March 2009 to June 2010
I made 200-300 lb batches of dough, put them on tables, let them rise, then cut them into loaves and send them through a roller then a machine that cuts the donut pieces, we then put donuts on trays, that then went into a proofer. at which point I would come and fry them in a double vat formulator.I then had them sent down to be finished. I also did finishing i.e (frosting, filling donuts, sprinkles.), I did as well do baking such as making bagels, cookies, muffins, croissants, etc. I also was responsible for cleaning up after my shift.
Education
T.n.t high school
Skills
• Microsoft word (6 years)
• microsoft excel (8 years)
• machine operator (3 years)
• laborer (3 years)
• Roofing
• Forklift
• General Labor
• General Laborer
• Construction Laborer
• Forklift
• Leadership
• Laboratory experience
• Construction
• Bartending
• Assembly (3 years)
• Blueprint reading (3 years)
• Schematics
• Customer service (7 years)
• Cooking (5 years)
• Manufacturing
• Mechanical knowledge
• Math
• Computer skills
• Communication skills
• Computer literacy
• Analysis skills
• Sales
• Employment & labor law
• Basic math
• Baking
• Laundry
• Load & unload
• Food preparation
• Organizational skills
• Microsoft Excel
• Food handling
• Kitchen management
• Knife skills
• Restaurant experience
• Cash handling
• Machining
• Micrometer
• Calipers
• Warehouse experience
• Pallet jack
• Cleaning
• Cash register
• Management
• English
• FDA regulations
• Supervising experience
• Plastics injection molding
• ISO 9001
• Manufacturing facility
• Brewing
• Retail sales
• Debugging
• Security
• Conflict management
• Precision measuring instruments
• Shop math
• Marketing
• Cycling
• Retail math
• Mechanic experience
• Microsoft Office
• Microsoft Word
• Microsoft Powerpoint
• Purchasing
• AutoCAD
• CAD
• Food service
• Meal preparation
• Culinary experience
• Precision measuring instruments
• Communication skills
• Crane
Certifications and Licenses
OSHA 10
Had osha cert. But need to renew
CPR Certification
June 2022 to June 2023
ServSafe
March 2023 to March 2034
Forklift Certification
Pallet Jack Certification
October 2023 to Present
Driver's License
Food Handler Certification
Assessments
Cooking skills: Basic food preparation — Proficient June 2022
Preparing food, using cooking equipment, and converting ingredient measurements Full results: Proficient
Automotive maintenance — Completed
February 2023
Knowledge of vehicles, vehicle maintenance, and repairs Full results: Completed
Management & leadership skills: Impact & influence — Completed October 2023
Choosing the most effective strategy to inspire and influence others to meet business objectives Full results: Completed
Work motivation — Proficient
December 2021
Level of motivation and discipline applied toward work Full results: Proficient
Attention to detail — Proficient
June 2022
Identifying differences in materials, following instructions, and detecting details among distracting information
Full results: Proficient
Food safety — Completed
October 2023
Knowledge of proper food and equipment handling safety measures Full results: Completed
Work style: Reliability — Proficient
December 2021
Tendency to be reliable, dependable, and act with integrity at work Full results: Proficient
Cleaner fit — Proficient
February 2023
Measures the traits that are important for successful cleaners Full results: Proficient
Mechanical knowledge — Proficient
February 2023
Understanding and applying mechanical concepts and processes Full results: Proficient
Forklift safety — Proficient
October 2022
Best practices and safety hazards in forklift operation Full results: Proficient
Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.
Contact this candidate