Sheet Metal Mechanic
Resume:
Jonathan Palmer
Driver/Worker
Kingsland, GA ****8
********@*****.***
Authorized to work in the US for any employer
Willing to relocate anywhere
Work Experience
Sheet Metal Mechanic
Trident Refit Facility (DOD) navy - Kingsland, GA
May 2021 to Present
● Manufacturing and installing various sheet metal products, such as air and heat ducts, metal trims, and much more where sheet metal is required. Work is done on a nuclear powered submarine.
● Measuring, marking and laying out sheets of metal for specific jobs
● Operating various computerized tools that precisely cut, bend or straighten the metal sheets
● Polishing metal areas like rough surfaces or the seams and joints between two sheets of metals
● Welding different sheets of metal together
● Reading and applying work specifications
UV truck operator/laborer
Engineered Lining Systems - Jacksonville, FL
August 2020 to Present
Repair existing pipe with a fiberglass resin liner that requires UV to cure. I Drive the truck and operate the machine that controls the UV light cores. I Crawl into manholes and storm drains to add the liner Familiar with confined space equipment and work in the confined spaces Knowledge of proper PPE
Basic knowledge of Proper handling care of different chemicals such as resins and epoxy resins to name a couple.
PCA
Flightstar Aircraft Services - Jacksonville, FL
September 2019 to August 2020
Audit paperwork for FFA to ensure all is right before aircraft can leave the facility Worked with airline programs like PCS-E and Amros. Acquired general knowledge on different aircrafts.
(Put on furlough due to Covid -19 )
Engineer/worker
OMNI Amelia Island Plantation - Jacksonville, FL
August 2017 to September 2019
1. Ensure a safe, efficient, and well-maintained facilities environment including public areas, administrative offices and other structures not categorized as a villa unit or hotel room.
2. Maintain all public areas and guestrooms on an on-going basis (corner guards, locks, windows, doors, and furniture.)
3. Keep the facilities, villa and hotel decor in good condition. 4. Clean all work areas after completing job.
5. Fill out daily work form.
6. computer skills
Have the knowledge and ability to use the proper equipment and tools. Entry HVAC, Electrical, Carpentry, and Plumbing knowledge. Delivery Driver/Worker
Navy Exchange - Kings Bay Base, GA
May 2015 to August 2017
1. Obey traffic laws and follow established traffic and transportation procedures. 2. Report any mechanical problems encountered with vehicles. 3. Report vehicle defects, accidents, traffic violations, or damage to the vehicles. 4. Fill vending machines with the appropriate drink. 5. Collect money from vending machines and drop off to bank 6. Take inventory of every bottle on truck weekly
7. Have great customer service
Driver/Worker
Registers custom services - Lake City, FL
March 2015 to May 2015
1. Obey traffic laws and follow established traffic and transportation procedures. 2. Report any mechanical problems encountered with vehicles. 3. Collect delivery instructions from appropriate sources, verifying instructions and routes.
4. Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
5. Report vehicle defects, accidents, traffic violations, or damage to the vehicles. 6. Clean or prepare construction sites to eliminate possible hazards. 7. Read plans, instructions, or specifications to determine work activities. 8. Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes. 9. Measure, mark, or record openings or distances to layout areas where construction work will be performed.
10.Lubricate, clean, or repair machinery, equipment, or tools. 11. Provide assistance to craft workers, such as carpenters, plasterers, or masons. Truck Driver
Knight Transportation - Lakeland, FL
January 2015 to March 2015
1. Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
2. Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
3. Collect delivery instructions from appropriate sources, verifying instructions and routes.
4. Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
5. Report vehicle defects, accidents, traffic violations, or damage to the vehicles. 6. Drive trucks to weigh stations before and after loading and along routes to document weights and to comply with state regulations. 7. Operate equipment, such as truck cab computers, CB radios, and telephones, to exchange necessary information with bases, supervisors, or other drivers. Truck Driver
Prime INC - Springfield, MO
June 2013 to November 2013
1. Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
2. Collect delivery instructions from appropriate sources, verifying instructions and routes.
3. Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
4. Report vehicle defects, accidents, traffic violations, or damage to the vehicles. 5. Secure cargo for transport, using ropes, blocks, chain, binders, or covers. 6. Drive trucks to weigh stations before and after loading and along routes to document weights and to comply with state regulations. 7. Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
8. Inventory and inspect goods to be moved to determine quantities and conditions. 9. Operate equipment, such as truck cab computers, CB radios, and telephones, to exchange necessary information with bases, supervisors, or other drivers. 10.Read bills of lading to determine assignment details. 11. Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks. 12.Read and interpret maps to determine vehicle routes. 1. Langs seafood, St. Marys, GA
Reservationist, Mar 2014 - Dec 2014
1. Plan routes, itineraries, and accommodation details, and compute fares and fees, using schedules, rate books, and computers.
2. Make and confirm reservations for transportation and accommodations, using telephones, faxes, mail, and computers.
3. Prepare customer invoices and accept payment.
4. Answer inquiries regarding information such as schedules, accommodations, procedures, and policies.
5. Determine whether space is available on travel dates requested by customers, assigning requested spaces when available.
6. Maintain computerized inventories of available passenger space and provide information on space reserved or available.
Education
High school diploma or GED
Some college in Electrical Engineering
ITT Technical Institute-Jacksonville - Jacksonville, FL Web developer/software engineering (enrolled in self paced courses) at ZTM and HarvardX courses for python and full stack
Skills
Great computer skills - Microsoft office and much more Heavy Equipment Operation
Equipment Repair
Load & Unload
Can operate a forklift -1 year
Can operate an Aerial work platform (sky power (lift) Less than 1 year
Tanker Experience
Mechanic Experience
Fabrication
Flatbed
Commercial Driving
Certifications / Licenses
CDL Class A
July 2020 to Present
July 2020 - License renewal
Tanker endorsement
CPR Certification
First Aid Certification
Additional Information
1. I have the ability to understand and follow instructions and specifications with no trouble.
2. I am more than able to obtain and maintain a security clearance, pass a physical, and drug test when needed.
3. I have great coordination, a great attitude, time management, listening skills. 4. Able to carry 60+ lbs
5. able to work in places that require bending, pushing and pulling, climb, and stand for long periods of time.
Contact this candidate