Assembly Electro-mechanical Assembly Prototype Assembly, Electronics

Douglas G. Aschenbrenner, Jr.

Lawndale, CA ****0

Cell 310-***-****

********.**@*****.***

SUMMARY

25+ years as an Assembler, experienced with precision-dependent automation and electro-mechanical assembly.

QUALIFICATIONS AND SKILLS

25+ years assembling Familiar with schematics and blueprints

Machine operation Stand-up and sit-down forklift

Wave Soldering Machine Magnified Soldering to 25x magnification Precision Instruments Trained new hires and co workers

Magnified micro electro mechanical assembly

EMPLOYMENT HISTORY

Tritium Technologies, LLC Production Worker 7/17 to 5/2020

Torrance, CA

Assembled high voltage charging units that our modern day electric and hybrid vehicles and buses increase their sales and population. Also known as a “fast chargers”, a nine-step process would complete a charger; from raw aluminum inspection to final assembly checklist testing. The production team cross trained as needed, and I trained and supervised new production employees; mentored and supervised while cross training. Fabricated sub-assemblies, created new methods of warehouse functionality and organization, supervised, repaired units from the field. Manpower Staffing Assembly 11\15 to 2\16

Torrance, CA

Mediamation, Inc. - Prepared steel frames for use as bottom half of a two-part active-motion undercarriage on 4D/5D custom theater seating benches. Successful production required the use of common hand tools as well as various power tools. Inspection, functionality testing, troubleshooting, diagnosis, and reassembly of undercarriage all part of common routine assembly process. Operated forklift, assisted in the crating and loading/unloading of trucks. Managed/maintained levels of stock of assembly parts within department, ordered parts as required, as well as methods of traceability.

Ashby Remodeling & Services Painters Assistant 8/09 to 7/12; 2/15 to 10/15

El Cajon, Ca

Painted interior/exteriors of residential and commercial buildings, assisted with site prep, material transport, and various "gopher" duties, as support to production requirements. Cut tile to fit countertops, patios, kitchen, and bathroom enclosures. Operated pneumatic jackhammer, and carved many trenches with a shovel. Occasional duties included landscaping, constructing concrete forms, and pouring concrete.

Page 2 of 4

Douglas G. Aschenbrenner, Jr.

Lawndale, CA 90260

WORK EXPERIENCE CONTINUED

Aerotek Staffing Press Operator 1/15 to 02/15

Long Beach, CA

Toyota Auto Body of America - Stamping Department; Operated 100-ton Clearing Niagara hydraulic press, designated as press #2 in a 4-press conveyor belt system pressing sheet steel into various body panels for certain Toyota vehicles. Work performed required standing for the entire shift, and required moving a formed sheet of steel off a conveyor belt from the previous press, and into the correct position of press #2. Formed part was pressed yet again, to be ejected out the rear of the machine, and laid along same conveyor, to another press station. All parts to be stamped started off as a flat sheet of steel, to be progressively formed using multiple presses to form various auto body parts for Toyota Tacoma trucks, as well as various Tesla auto body parts. Employed to work third shift, and hired as temporary staff.

Werner Enterprises Truck Driver 2/14 to 06/14

Fontana, CA

Drove Semi-Tractors attached to 53’ van-style shipping containers that contained products, goods, and materials of varied nature and composition to businesses nationwide. Performed daily pre-trip inspection, planned travel route, delivered goods to customers, interacted with shipping & receiving personnel. Verified that all shipping documents were correct, signed when needed, then sent that paperwork into headquarters.

So Cal Property Clean-Out Owner/Operator 3/11 to 11/11

Riverside, CA

Construction site cleanup, refuse/recycling removal, and handyman services oriented sub-contracting business. Various home repair projects for property owners including drywall, plumbing projects, sub-floor, door-jamb, sheet glass window and flooring replacement. Most work included interior/exterior painting, drywall patching, and re-texture.

Madell Technology Assembler 11/10 to 01/11

Ontario, Ca

Hired for a piece-work-only temporary contract, to retro-fit a unique type of machine known as a Pick-and-Place machine; to scratch-build wiring harnesses, mark and route electrical wiring and pneumatic tubing, construct and then connect these machines to their respective control boxes. Wire measurement, cutting, splicing wires, and soldered or crimped terminals as required. Tested equipment, prepared for shipping, constructed crates, identified and marked crates for shipment.

Page 3 of 4

Douglas G. Aschenbrenner, Jr

Lawndale, CA 90260

WORK EXPERIENCE CONTINUED

Express Employment Professionals Assembler 2/09 to 3/09

Independence, MO

DDP Plumbing Contractors Supply – Assembled products knows as Propulsion Inverters, used primarily as a component used in freight train braking systems. Used hand tools common to the assembly industry, pneumatic tools, and the reciprocating and cutoff saws. MIG welded stainless steel to complete the standardized assembly process.

Premiere Global Conferencing Conference Support Specialist 7/08 to 10/08

Lenexa, KS

Answered incoming calls, and then connected them to confidential and secure access global business conferencing. Set-up and facilitated Fortune 500 and entertainment industry conference calls; obtained and verified participant data using set client requirements.

VC999 Packaging Systems, Inc Electro-Mechanical Assembler 10/03 to 02/08

North Kansas City, MO

Constructed custom sub-assemblies, integrating made-to-order custom aluminum parts, with purchased items to construct "die parts", or the numerous sub-assemblies required to complete the vital components of thermo-form vacuum packaging machine forming station. Used a wide variety of hand tools, as well as use of machine shop machines (Mill, Lathe, etc), and vacuum test equipment. Assembled wiring harnesses, assisted Electrician in building electrical panels, using electronic schematics. Voltmeter test, parts inspection, engineering and assembly blueprint reading, soldering (and magnified soldering), troubleshooting, inventory and cycle counting were among weekly routine.

Accessible Technologies Inc. Assembler 9/02 to 7/03

Lenexa, KS

Constructed high-performance motor aftermarket components called "Superchargers", matching precision transmission gears, pinion gears, bearings and blower housings, Pre-assembly, in-process and final inspection, tested every single unit, then prepared them for shipping to customers. Used micrometer and dial calipers, common hand and pneumatic tools, and polished aluminum housings. Stocked inventory; washed parts; warranty rebuilds and repair of older units sent in by customers.

Page 4 of 4

Douglas G. Aschenbrenner, Jr

Lawndale, CA 90260

WORK EXPERIENCE CONTINUED

Remedy Intelligent Staffing Soldering Technician 8/01 to 2/02

Independence, MO

Hand-assembled custom circuit boards for SM/TSM mass-quantity production. Using various electronic circuit board components. Inspection of circuit-boards required a visual solder joint examination and the bench-testing of units.

CCS Packard Electro-Mechanical Technician 7/97 to 3/00

Lomita, CA

Assembled machines called “Plate Wash”, an electro-mechanical device used in pharmaceutical liquid handling applications; specifically, in clean-room or laboratory environments. Used hand tools common to the assembly industry, as well as precision measuring instruments. Final assembly of machines required calibration, including adjustment of X, Y, and Z axis position, data collection, calculation of liquid dispense and residual weight in 96/384 well plates using gram scale. Programmed and cycle tested each individual unit. Batch programmed firmware chips, assembled unit wiring per schematic diagrams, and electrical troubleshooting. Operation of standard and precision drill press, arbor press, pedestal grinder, hand drill and other associated tools used daily.

References

Robert Brubeck, Owner – housecleaning service

310-***-**** - Friend 40+ years

Aaron Ashby, General Contractor

619-***-**** – Friend (40+) years/former employer 4+ years

Contact this candidate