Structural Welder 1St Class
Resume:
Omar Larroy
*st Class Structural Welder/Fitter
Vancouver, WA 98661
************@*****.***
Hard working tradesmen, good teammate and safety-oriented employee looking for a company to provide the best of my skills towards the growth of such.
Willing to relocate: Anywhere
Authorized to work in the US for any employer
Work Experience
Welder
Southeast ship repairs-Reedsport, OR
May 2024 to June 2024
Prepping, grinding, fitting and welding the main deck on the starboard side on a tugboat. Fitter/Welder
JAG Industrial & Marine Services-Portland, OR
January 2024 to March 2024
Repairment on a navy boat. Cleaning, cutting,grinding and refitting on different parts of the boat. And finishing with the welding procedures with Stick or flux core. Welder/Fitter
JAG Marine-Portland, OR
August 2023 to October 2023
I started welding. Navy boat on a dry dock.repairs in most of the areas in boat welding inserts,flatbars, channels etc. Confined space. Good experience.even fitting Scraping the area doing the prepping fitting the parts and when they past the inspection to weld ceramic, filled,grave, overlapping etc. Welder/Fitter
Southeast ship repairs-Portland, OR
June 2023 to August 2023
It's just repairs and it is just for a week or two then we have to wait for another bid for the same thing.. that's why I'm looking for something better.
Welder1
VIGOR works-Vancouver, WA
December 2022 to May 2023
New construction., building a bridge.
Welder
JAG Marine vigor pdx-Portland, OR
September 2022 to November 2022
Repairs
Welder
Construction Services, LLC-Philadelphia, PA
February 2022 to March 2022
Group 630.
Welder sructural
NSC Technologies, LLC-Marinette, WI
August 2021 to January 2022
New construction welding on the panel line prefab shop.. Fitter/Welder
JAG Industrial & Marine Services-Hansen shipyard Ohio January 2021 to March 2021
Repair on cargo tanks removing flange plates,angles,brackets and plates (inserts).After the prep.fitting new parts etc. Getting the ok to weld the parts 100%. Fitter/Welder
JAG Industrial & Marine Services-Seattle, WA
March 2020 to October 2020
Reappearing on a navy vessel & reinforcement of side shells engine rooms.etc Welder/Fitter structural
Jag marine-Toledo, OH
January 2020 to March 2020
Repairment on a cargo ship removing faceplates .cutting and washing.grinding and fitting new parts plates. Brackets .And welding with stick or wire.
Fitter/Fabricator
JAG Industrial & Marine Services-Portland, OR
April 2019 to June 2019
Repair. At a military ship.removing old pipeline . 1st Class Structural Welder/Fitter
Hansen-Toledo, OH
January 2019 to March 2019
Ship repair, fitting inserts and welding them 100% Scrapping sections of the ship and replacing section plates and shells.
•FCAW, SMAW, torch cutting, washing and trimming, Carbon Arc Gouging, ceramic tape welding. 1st Class Structural Welder/Fitter
Jag Marine at vigor.-Portland, OR
October 2018 to December 2018
Ship repair, fitting inserts and welding them 100% Scrapping sections of the ship and replacing side shells and welding them to completion.
•FCAW, SMAW, torch cutting, Carbon Arc Gouging
1st Class Structural Welder
Vigor-Portland, OR
June 2018 to October 2018
Adjusted the weld machines to the correct settings prior to weld applications. Set up equipment and welded parts according to welding chart specifications for UT inspection. Positioned and clamped work pieces together and properly assembled them in jigs and fixtures. Operated manual and semi-automatic welding equipment to fuse metal segments together Monitoring the Fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
•FCAW, Carbon Arc Gouging, torch and plasma cutting. 1st Class Welder/Fitter
Vigor-Portland, OR
February 2018 to June 2018
Worked on the repair of a navy ship and a cruise ship. Adjusted the weld machines to the correct settings prior to weld applications. Set up equipment and welded parts according to welding chart specifications and type. Positioned and clamped work pieces together and properly assembled them in jigs and fixtures. Operated manual and semi-automatic welding equipment to fuse metal segments together Monitoring the Fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
•FCAW, SMAW, Carbon Arc Gouging, Chipping, Grinding. 1st ClassWelder/Fitter
Vigor-Seattle, WA
February 2016 to June 2017
Ship repair of coast guard vessels and state ferries. Replacing critical lines such as chill water and fire main. Position pipe in hull of ship and align using jacks, turnbuckles, clips, wedges and mauls.
• Worked on CUNI and stainless piping, installed packing, liners and gaskets and structural members, such as doors, hatches, brackets and clips.
• Tack weld clips and brackets in place prior to permanent welding.
• Full weld of plates and frames assembled for repair.
•GTAW, SMAW
1st Class Structural Welder/Fitter
Hansen-Toledo, OH
December 2015 to February 2016
Ship repair, fitting inserts and welding them 100% Scrapping sections of the ship and replacing section plates and shells.
•FCAW, SMAW, torch cutting, washing and trimming, Carbon Arc Gouging, ceramic tape welding. 1st Class Structural Welder/Fitter
Fairhaven Shipyard-Bellingham, WA
September 2015 to December 2015
Ship repair, fitting inserts and welding them 100% Scrapping sections of the ship and replacing section plates and shells.
•FCAW, SMAW, torch cutting, washing and trimming, Carbon Arc Gouging, ceramic tape welding. 1st Class Pipe Welder/Fitter
Vigor-Portland, OR
April 2015 to September 2015
New Construction of Harley barges.
Position pipe in hull of ship and align using jacks, turnbuckles, clips, wedges and mauls.
• Installed packing, liners and gaskets and structural members, such as doors, hatches, brackets and clips.
• Tack weld clips and brackets in place prior to permanent welding.
• Full weld of plates and frames assembled for repair.
•GTAW, SMAW, FCAW
1st Class Structural Welder/Fitter
TMM-Gulfport, MS
June 2011 to March 2015
Ship repair, fitting inserts and welding them 100% Scrapping sections of the ship and replacing section plates and shells.
•FCAW, SMAW, torch cutting, washing and trimming, Carbon Arc Gouging, ceramic tape welding. Worked doing ship repair shutdowns around the gulf coast. Education
High school or equivalent in Welding
Vocational Antonio Lucchetti - Arecibo P.R.
January 1992 to July 1995
Skills
• GMAW
• PLASMA CUTTING
• CERAMIC
• READ DRAWINGS
• PLASMA
• Fire Protection
• Blueprint Reading
• Welding
• Fabrication
• Spanish
• English
• Assembly
• Forklift
• Flux welding
• 4G/LTE
• MIG welding
• FCAW
• Stick welding
• 3G
• Blueprint reading
• Welding
• Forklift
• Welding
• MIG welding
Certifications and Licenses
Welding Certification
OSHA 10
Non-CDL Class C
Driver's License
Additional Information
SKILLS
Proficient in Stick: 6010, 6011, 6013, 7018, 7024, 308-316; FCAW, GMAW: Dual-shield, inner-shield, hard wire .35 .45 .52 1/16 ceramic tape experience. Know how to read drawings and ISO's. Lay out and Fit according to drawing specifications. Skilled cutting and washing with the torch, plasma cutting, Arc gouging. Using hand/power tools.
Contact this candidate