Quality Assurance Inspector
Resume:
Philip Rockwell
Quality Assurance Technician
Colorado Springs, CO
************@*****.***
Authorized to work in the US for any employer
Work Experience
Quality Inspector 6
Allegion - Security-Widefield, CO
August 2020 to Present
CMM programmer, inspects parts using all hand tools, micrometer, calipers pins, comparator. Drawing and GD&T understanding. Calibration and recording of tool data. Mechanical Inspector
Prescott’s Surgical Microscopes - Mounument Colorafo July 2018 to Present
inspection of first article and complete machined parts. CMM Programmer
Phillips - Colorado Springs, CO
November 2017 to July 2018
Programming OGP multisensor measuring machines. Fixture design process implementation, and training.
QA Inspector III
Relius Medical LLC
September 2015 to October 2017
Responsibilities include, Receiving inspection of finished and in process medical devices. First article inspections of new products and process capability. Tools used, Height stands, Gage blocks/Pin gauges, Thread gauges and optical comparators. Micrometers, and calipers. Trained new inspectors on measurement tools and GDP. Completed Programming of Micro Vu Vision system and EDM Set up and operation
Records and maintains quality records and documents with adherence to QMS For medical devices ISO 13485.
QA Inspector III
Superior Technical Resource's
September 2013 to June 2014
Responsibilities include, Receiving inspection of finished and in process aircraft parts, Portable CMM, Height stands, Gage blocks/Pin gauges, Thread and spline gauges, Micrometers, and calipers. Records and maintains quality documents for internal process control and customer required product certificates of conformance. Adheres to AS9102 First Article Inspection reports. Wa QA Inspector IV
Primus International Algona
August 2012 to August 2012
Responsibilities include, inspection of finished aircraft parts, using CMM's, Portable CMM, Height stands, Gage blocks/Pin gauges, Micrometers, and calipers. Records and maintains quality documents for internal process control and customer required product certificate of conformance. Adheres to AS9102 First Article Inspection reports of inspection of aircraft parts. 3DSystems Seattle, Wa. Rapid Prototyping QA Technician First Article Inspection
January 2011 to August 2012
Responsibilities include, inspection of SLA patterns and molds, using CMM's, Portable CMM, Height stands, Gage blocks and calipers. Records and maintains quality documents for internal process control and customer required product certificate of conformance. Including Using Solid View to create product drawings and inspection documents. First Article Inspection and in process inspection for urethane based molding production. Inspection and quality reporting for the appearance model team and program managers.
Co QA Technician II
CEA TECHNOLOGIES - Colorado Springs, CO
2006 to 2009
Managed incoming quality inspections and disposition of non-conforming materials reporting ( NCMR and CAPA), as well as in-process, first article, and final inspections. Completed mechanical and electrical inspections using micrometers, calipers, visions systems, CMM, and digital multi meters.
Provided support to engineering department on critical inspections of process development to meet deadlines.
Complied with strict customer requirements by completing all final product conformance certificates. Served as Calibration Technician, coordinating all calibration activities with production, purchasing, and engineering.
Scheduled vendors for on- and off-site calibration activities. Maintained a comprehensive database of all calibration records and certificates. Engineering Technician III
WL GORE AND ASSOCIATES Inverness, CO
2006 to 2006
Process development of ultra sound catheters. Programming of optical measuring tools (OGP Smart scope) Collected programming data and performed analysis. Worked with Development Engineering to train develop and mentor operators and other technicians on new dicing equipment and measurement equipment.
Dicing Supervisor
ASPEN TECHNOLOGIES - Colorado Springs, CO
2003 to 2006
Semiconductor/ Mems manufacturing, Die separation/dicing, Die inspection IPC-610 MIL-STD, picking and placement/ alignment of Die, Wire bonding testing and encapsulation of wire. Process compliance of government-secure builds with complex, multi-die wafers. Engineering Technician III
SAINT-GOBAIN ADVANCED CERAMICS - Colorado Springs, CO 2000 to 2003
Procured new machines and established processes for acquisitions. Established revenue-generating process using raw UN-programmed machines, including tooling design, data acquisition and analysis and overall cost and process yield. Completed operator training certification and process documentation that meet customer requirements. Programmed CNC machines and provided process troubleshooting. Established long-term contracts with vendors to acquire raw materials at lower cost and higher yield. Completed tight-tolerance machining and inspection .0002" to .005mm). Programming of Optical measurement equipment.
STORAGETEK Louisville, CO Engineering Technician IV, 1993-2000Engineering of manufacturing and inspection processes for disc and tape drive head manufacturing, including class 1000 clean room manufacturing. Developed and Transferred supported tight-tolerance high yield manufacturing for of shore manufacturing China.
Education
GD&T
PIKES PEAK COMMUNITY COLLEGE - Colorado Springs, CO Some college, lots of technical training on equipment if all types. FRONT RANGE COMMUNITY COLLEGE - Westminster, CO
Some college in Supervision and Management
VENTURA COLLEGE - Ventura, CA
Skills
• Zygo and Wyko trained (10+ years)
• CMM, OGP, Micro Vu process development and validation. (10+ years)
• Quality Control
• GD&T
• Assembly Experience
• Basic Math
• Mechanical Knowledge
• Aviation Experience
• Lift Truck Experience
• Warehouse Experience
• Data Collection
• Forklift
• CNC Programming
• Machining
• Electrical Discharge Machining
• Calipers
• Micrometer
• Calibration
• Manufacturing
• ISO 9001
• Quality Assurance
• 5S
• Microsoft Office
• Assembly
• Dimensional inspection
• CAD
• Laboratory experience
Assessments
Conscientiousness — Highly Proficient
October 2019
Tendency to be well-organized, rule-abiding, and hard-working. Full results: Highly Proficient
Personality: Hard-Working — Highly Proficient
June 2019
Measures a candidate's tendency to be rule-abiding, well-organized, hard-working, confident, and think before acting.
Full results: Highly Proficient
Mechanical Skills Aptitude — Expert
June 2019
Measures a candidate's ability to understand and apply mechanical concepts and processes. Full results: Expert
Data Analysis — Familiar
June 2019
Measures a candidate's skill in interpreting and producing graphs, identifying trends, and drawing justifiable conclusions from data.
Full results: Familiar
Management & Leadership Skills: Planning & Execution — Familiar October 2019
Planning and managing resources to accomplish organizational goals. Full results: Familiar
Construction Safety — Highly Proficient
November 2019
Using safe practices while on a construction site. Full results: Highly Proficient
Scheduling — Completed
November 2019
Cross-referencing agendas and itineraries to avoid scheduling conflicts. Full results: Completed
Mechanical Skills: Monitoring — Highly Proficient
February 2020
Monitoring machine indicators to determine appropriate functioning. Full results: Highly Proficient
Mechanical Skills: Aptitude — Highly Proficient
February 2020
Understanding and applying mechanical concepts and processes. Full results: Highly Proficient
Work Style: Conscientiousness — Highly Proficient
October 2019
Tendency to be well-organized, rule-abiding, and hard-working. Full results: Highly Proficient
Manufacturing: Quality Inspection — Expert
May 2020
Making precise measurements, reading prints, and making pass/fail decisions. Full results: Expert
Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.
Additional Information
Manufacturing/QA/ Engineering Technician with extensive background in Engineering/Manufacturing. Many years of manufacturing experience. Implementing, and Developing manufacturing processes for many types of Products To Include Disc/Tape drive heads, Semiconductors, Medical Devices, and Aircraft components. Maintaining a rigorous adherence to standard operating procedures and good manufacturing practices, ensuring consistent product quality in demanding production environments. Proven ability to plan, schedule, and coordinate multiple projects to achieve organizational goals. Possesses excellent problem solving skills and analytical thinking. Technical Skills Include:
Clean Room Processes, Protocols and GMP, Safety Microscope inspections of Semiconductors and Mems IPC-610 Rockwell Hardness testing, Eddy Current testing Visions Systems OGP Micro-Vu CMM, Romer and Faro Arm Digital Multi meters and Electrical testers Wire Bonding Ball Bonding Kulicke and Soffa Wire EDM Machine Setup MS Excel, Word, Data analysis, Design of Experiments
Laser Interferometers, Surface profilometers GD&T training Dimension inspections Tolerances below .0002
Contact this candidate