Maintenance Technician 3Rd Shift
Resume:
Kevin Mitchell
Cincinnati, OH *****
**************@*****.***
Electric Motor and pump technician seeking employment with a reputable company. I am an extremely hard worker, a quick study of company standards, sops, policies and willing to work individually or in a team environment. I am dependable and would love to find a company that I could join, grow with and make a career out of. I am willing to work any shift but prefer 1st or 3rd shift. Thank you in advance for your time and consideration.
Authorized to work in the US for any employer
Work Experience
Maintenance Technician
Aramark Uniform Services - Cincinnati, OH
October 2023 to March 2024
Opened up plant and production areas. Started boiler system. Started compressors. Took meter readings daily. Turned on all water valves and controls. Started up production machinery such as; washers, dryers, tunnels and ironers. Blew down and cleaned out all machinery in production areas. Removed all lint cans for dryers and made sure screens were clean. Answered maintenance calls from production areas. Preformed weekly PM's( preventative maintenance) on machines. Opened up access panels on dryers and blew out lint and debris, cleaned off motors and fans, greased all fittings. Checked all controls, fire alarms, drums, motors, belts and wheels. Using LOTO, lock-out tag-out, SOP's and other company standards. Checked all PLC's, digital displays to make sure proper formulas and other characteristics were correct. Talked to production workers. Adhered to supervisors instructions. Electric Motor & Pump Technician
Electric Motor Technologies - Norwood, OH
August 2021 to May 2023
Tear down and assess issues with units. Test units thoroughly, take pictures, take measurements using verneer callipers, micrometers, and other measuring equipment. Check units electrically using megers, hi-pot, and phase surge testers such as Baker epuipment. Determine what parts are required to repair units and write them up. Clean parts thoroughly using sandblaster, grinders, wire wheels and lathes. Assemble units installing mechanicanical and lip seals, ball bearings, moisture sensors, gaskets, new hardware and sealants. Install new cordage from as small as 16/2 up to 2/4 and larger for power and sensor cables. Strip back and flex seal and epoxy as needed on submersible and explosion proof units. Wire all electrical connections, 230 and 460 volts three phase and 110 and 220 volt single phase using insulated connectors, heat shrink, soldering and brazing techniques, fiberglass tape and so on. Test and run all finished units making sure they are the correct voltage and amperage. Fill with grease and oil as needed. Paint finished units and draw new wiring diagrams as needed. While at EMT I have passed numerous courses including forklift, electrical safety, arc flash and hand and power tool safety. I have also obtained certification in CPR and First Aid which is valid for two years. I have all previously mentioned documentation. Used over-head cranes and forklifts on a daily basis to aid in the tasks given to me. As well as skidding up units, banding and wrapping in plastic to ensure they are shipped and delivered safely and securely to the customer.
Operator 1
Jet/Jabil - Florence, KY
May 2020 to August 2021
Material Handling
Processing
Birthing
Various stations including line prep, power supply units, green boards; motherboards, pci, power boards, power distribution boards, rack prep; scanning individual servers, switches, optical units and then inputting and saving that data into company software system. Training and helping new employees. Material Handler
OHIO VALLEY GOODWILL INDUSTRIES - Cincinnati, OH
January 2020 to May 2020
Supervisor: Bill Martin Phone:513-***-**** ext. 6289 Work daily by inserting biopsy pads into biopsy cassettes and frames for the medical industry. Package and make ready for shipment.
Machine Operator/Trainer
LUXFER MAGTECH, INC - Cincinnati, OH
April 2019 to November 2019
2940 Highland Avenue, Cincinnati, OH 45212
04/2019 - 11/2019
Supervisor: Michael Michna Phone: 513-***-****
Run machinery in Chemical Production area; including Cozzoli's, Thermo-Former and Die Punch Out, glass cutting and ampule forming machinery, ultra-sonic welders, pull-tab heat gun machines, M-8 sheeter, stitcher, auto-bagger and champion cutter. Rework. Train new associates on company processes and standards. Conduct inventory monthly.
2nd Shift Supervisor
ADECCO USA - Walton, KY
September 2018 to January 2019
Conduct onboarding and orientation for new associates and rehires. Counsel and coach associates on UPH levels and job performance. Terminate associates as needed. Conduct daily attendance reports. Communicate with supervisors nightly and carry out their wishes whenever possible. Used Microsoft Word; Outlook, Excel and PowerPoint to do spreadsheets, schedules as well as nightly performance reviews.
Maintenance Technician
FROST REHAB AND MAINTENANCE - Milford, OH
March 2000 to March 2016
Supervisor: James Frost (deceased) Phone: N/A
Maintain and upkeep apartments by doing electrical, plumbing, drywall, painting, roofing and landscaping. Collected rent and showed apartments to potential residents. Supervised and led crews in work assignments and daily schedules.
Power Panel Technician
CINCINNATI MILACRON - Cincinnati, OH
January 1998 to January 2000
Supervisor: James Marshall Phone: 513-***-****
Build and wire electrical power panels for aviation boring machines. Wire circuits completely by reading schematics and ladder diagrams. Troubleshoot and ring out for final inspection. Transformer Technician
SNELLING COIL SERVICE - Norwood, OH
December 1991 to October 1997
Wind electric coils for transformers and switch gear for power distribution. Refurbish and design coils, transformers and power panels.
Electric Motor Technician
WHEATLEY ELECTRIC SERVICE - Norwood, OH
June 1987 to September 1991
2088 Ross Ave, Norwood, OH 45212
6/1987 - 9/1991
Supervisor: James Brockie Phone: 513-***-****
Repair single phase, split-phase and three phase electric motors, DC drives and servo-drives as well as their components and controls. Extensive lathe experience in metallizing bearing journals and housings by using Metco 1200 flame spray outfit. Produce sleeve bearings from brass, bronze and Babbitt stock. Inventory taking, order taking of parts and motors; counter and over-the-phone sales. Education
Blueprint Reading in Machinery in Blueprint Reading in Machinery Scarlet Oaks Vocational - Sharonville, OH
January 1989 to April 1989
GED
SCARLET OAKS VOCATIONAL SCHOOL
1987
Vocational in Marketing Education
NORWOOD HIGH SCHOOL
1982 to 1986
Skills
• Pick up new skills quickly
• Comfortable working independently or as part of a team
• Highly motivated and effective problem solver
• Skilled in electric motors, transformers and power panels
• Self-efficient, follow directions well
• Dependable
• Punctual
• Motivated to learn new skills and industry standards
• Certified in "Blueprint Reading in Machinery"
• Drywall
• Schematics
• Materials Handling
• Plumbing
• Roofing
• CPR Certification
• Maintenance
• Fabrication
• Electrical Experience
• Mechanical Knowledge
• Calipers
• Micrometers
• Sensors
• Troubleshooting
• PCI
• Electrical systems
• Electrical experience
• Electrical wiring
• Supervising experience
• Industrial maintenance
• Industrial mechanic experience
• Schematics
• Hydraulics
• Hand tools
• Plumbing
• Construction
Certifications and Licenses
Blueprint Reading in Machinery
March 1989 to Present
12 week course at Scarlet Oaks Vocational
Driver's License
December 2022 to August 2028
Assessments
Workplace safety — Proficient
October 2020
Using safe practices at work
Full results: Proficient
Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.
Contact this candidate