Equipment Operator Heavy

JEANETTE MACK

**** ****** **** **** *****, SC ***36 Email: **********@*****.***

Cell 843-***-**** Home 843-***-**** - 843-***-****

QUALIFICATIONS SUMMARY

Trusted, results-oriented professional with over 20 years’ experience. Skilled at integrating customer specifications and technical requirements with sound business practices to provide the best possible services to surpass customer expectations. Proven ability to manage complex national and international programs in a dynamic environment. Recognized leader with strengths in honesty, teamwork, multi-tasking, self-starter, problem solving and commitment. Active Secret security clearance.

Key skills and core competencies include:

Electrical/Electronic Technician

Light/Heavy Equipment Operator

Shipping & Receiving

Electrical/Mechanical Assembly

Loadmaster, Material Handler

Supply & Logistics

Fabrication & Installation

Inventory/Audits Specialist

Warehouse Worker

Machine Operator

Forklift/Crane Operator

Administration

Familiar with the use and operation of Test, Measurement and Diagnostic Equipment (TMDE) and the developmental skills to present formal and informal training.

Knowledgeable on vehicle chassis and power train components including, frame cross members, clutches assemblies, transmissions, transfers, final drives, propeller shaft assemblies, brake systems and steering systems, suspensions systems, fifth wheel assemblies, wheeled vehicle crane, hoist and winch assemblies, and hydraulic systems.

Over 15 years’ experience as a truck driver and light/heavy equipment operator. Operated a tractor truck for Parks Auto and worked for Rude Transport driving a dump truck (1995 to 2003). While with Force Protection in overseas positions (2005 to 2012) and with BAE (2013 to 2015), operated the MRAP and passenger bus as well as 1,800 kg. load center forklift, G3500 16-foot cut-away van, articulating boom lift, aerial lift, 10-K forklift and overhead crane.

EMPLOYMENT HISTORY

C4I Integrated Technician, SAIC, Pisa, Italy, June 2015 – Present

COMMAND, CONTROL, COMMUNICATIONS, COMPUTERS, INTELLIGENCE, Army Field Support Brigade, Leghorn Army Depot.

·tests Supported systems integration to trace MRAP (Mine-Resistant Ambush Protected) situational awareness and network interoperability requirements to proposed component, subsystem, system, and system levels for full range of operational environments.

·Performed supply tasks that supported requirements verification, interoperability capability tests, and interoperability exercises to demonstrate network modernization and situation awareness improvements.

·Received, stored, and accounted for inventory and the issue of Fully Mission Capable GFE to the team. Supported and executed facilities; managed the facility and the accounting of property.

·Managed GFE Class IX material in support of the Hardware Integration/Quality Control facility using the Total Enterprise Asset Management System (TEAMS) and/or Army War Reserve Deployment Systems (AWARDS) and MS Office Suite.

·Provided engineering support for validation and acceptance of MRAP Situational awareness and Network integration and interoperability capability.

Electronics Technician II, BAE Systems, Charleston, SC, July 2013 – June 2015

FT. BLISS) (RRAD) RED RIVER ARMY DEPOT.

Disintegrations/integration of Mine Resistant Ambush Protection (MARP) vehicles with communications, intelligence, and reconnaissance (4ISR) system to include Marine Corps Transparent Amor Gun Shields (ELECTRONIC TECH III (MCTAGS), Blue Force Tracker (BFT )(BFT2), Defense Advanced GPS Receiver (KGV) (DAGR), Chameleon High Power IED Jammer, Vehicle Radio Control (A/N VRC-103, A/N VRC 104, A/N VRC 114 A/N VRC-111 A/N - 11O), Tactical Operations Center Intercommunications System (TOCNET), Drivers Vision Enhancement (DVE), Vehicle Intercom System (VIC-3) (VIC-5), (CVRJ) ( Duke) IED Jammer & Gunner Protection Kit (OGPK) (CROWS). (INSPECTOR ANALYZER)

JEANETTE MACK

Resume Page 2 Email: **********@*****.***

Cell 843-***-**** Home 843-***-****

EMPLOYMENT HISTORY

(BAE Systems Continued)

Tested radios electronic warfare devices, intra-vehicle communication systems & command control systems, also interprets data. Ensured that all equipment met government compliance standards

Mounted all lane equipment to IAF's and integrated all equipment including gate arm assemblies, vehicle pedestal assemblies, UPS's, open/closed camera assembly, biometric readers, setting up and configuring guard booth workstations, guard booth panels, gatehouse workstations, registration stations and kiosk, fabricate and wire gate house panels.

Built and integrated Primary and Secondary server racks including servers, switches, routers, firewalls, domain controllers, LCD consoles, KVM switches, troubleshot and maintained these systems.

Assisted on a P&DEC project and CND projects; worked on the TCF in a box project. Provided support for an ongoing C4ISR integration projects. The platforms included JHSVs, LHDs, LHAs, LPD 17 class, CVNs, and T-AKE class ships. Assembled and modified cable harnesses and connectors.

Served a year and seven months in the integration department working on AIE project fabricating and integrating ACP racks that included building, wiring, and installing DBU shelves, PLC shelves, lane shelves, WAP shelves, switches, routers, firewalls, tamper switches, servers, NVR's and UPS's per specific drawings.

Electronic Technician II, SAIC, Bagram, Afghanistan, April 2009 – June 2013

Fabricated and installed sensitive electronic equipment, modification of vehicle structures as well as surfaces preparation for painting, final finish, and corrosion prevention of technical and tactical vehicles used by the Department of Defense. Supervised a team of 10 technicians as well as assemblers in a warehouse/production environment

Installed electronic surveillance systems in land based assault vehicles utilizing technical publication, drawings, and schematics. Ensured that the integration and production process included precision drilling and reaming of holes for fastener installation in preparation for government QA final acceptance test and checks for various Army and Air Force tactical military vehicles

Oversaw the installation of the following systems and tested its’ operation by initiating live system pre-checks; C4I - (FRF 105D, FRF 115 Antennas, VRC 104, SATCOM X Antennas, MIL 21-75 SATCOM on the move, LOS (Line of Sight), BFT (Blue Force Tracker), VIC 3, TOCNET, DVE (Driver Vision Enhancement), CVRJ (Crew Vehicle Receiver Jammer), GPS Antenna, DAGR (Defense Advanced GPS Receiver), RWS (Remote Weapon System), single channel ground air radio system and communication's, and embedded In-theater instrumentation equipment systems

Mechanic Tech, Force Protection, Camp Leatherneck, Afghanistan, Jan. 2008 – July 2012

Performed mechanical upgrades to MRAP (mine resistance ambush protected) vehicles, axel tear down and installation. Responsible for all the mechanical maintenance to vehicles. Worked with the ISS program and repaired MRAPs and Cayman vehicles.

Performed upgrades and prototyping of RG 31 trucks. Block one mod upgrade: served as a subject matter expert on vehicles and systems. Acted as the primary point of contact for problem identification and accident investigations.

Provided training support and technical assistance during testing, troubleshooting, repairing, deprocessing, storing and shipping vehicles and their respective components during transition.

Repaired electrical systems including wiring harness, starting/charging systems. Performed wheeled vehicle recovery operations, troubleshooting, component and system fault isolation and repair.

Training in system operation, assembly and subassembly exhaust and cooling systems.

Mechanical Electrical Assembler, Force Protection, Mina Abdullah, Kuwait, Jan. 2005 – Dec. 2007

Performed the integration of on the MRAP All-Terrain Vehicles (M-ATVs). Performed diversified assembly operations to assemble intricate vehicles. Examined and interpreted drawings to insure proper assembly and functionality. Recommended ideas to help improve production

Performed skilled fitting of parts, sub-assemblies and mechanical units. Used precision measuring instruments and gauging devices.

JEANETTE MACK

Resume Page 3 Email: **********@*****.***

Cell 843-***-**** Home 843-***-****

EMPLOYMENT HISTORY

(Force Protection Continued)

Loaded, unloaded, and moved materials within or near plant, yard, or work site. Opened containers using steel cutters, crowbar, claw hammer, or other hand tools. Loaded and unloaded materials onto or from pallets, trays, racks, and shelves by hand. Loaded materials into vehicles and used hand tools to install strapping, bracing, or padding to prevent shifting or damage in transit.

Conveyed materials to or from storage or work sites to designated area using hand truck, electric dolly, wheelbarrow, or other device. Secured lifting attachments to materials and conveyed load to destination, using hand-operated crane or hoist, or signals crane or hoisting operators to move load to destination. Counted, weighed, and recorded number of units of crates and assemblies, components, wire harness, and plugs using ohmmeter, test lights, and other electrical testing instruments.

Connected wiring to accessories, such as relays, circuit breakers, plugs, condensers, switches, and solenoids, and installed accessory assemblies in electrical or electronic units using soldering gun and hand tools.

Various antenna systems; various cable and component-related maintenance; troubleshooting, repair, and replacement. Operated and maintained tools, test and vehicle equipment.

Dump Truck Driver, Rude Transport, North Charleston, SC, 2003 - 2004

Delivery Driver Semi-trailer truck, Parks Auto Warehouse, Moncks Corner, SC, 1995 – 2003

EDUCATION& TRAINING

High School Diploma, Cross High School

Certified Forklift and Crane Driver

Class A CDL License, Transport Trade

Manufacturing Certificates, Trident Technical College, Charleston, SC

Map-U Certificate

Material Handler Course

Proficient using Windows, DOS, Excel, Word, PowerPoint, Access and Outlook

Contact this candidate