Electrician

James Payne

574-***-**** ********@*****.*** Owensboro, KY 42301

SUMMARY

I am a very driven person who enjoys what I do and I am always willing to learn new things. I can be a tremendous asset wherever I go. I keep a positive attitude and take any job I get as a challenge to be the best I can be at what I do.

Expert electrician with experience completing accurate electrical work. Successfully collaborated with others while skillfully making independent decisions. Continually demonstrated excellent communication skills.

Knowledgeable electrician offering 24 years of increasingly advanced journey-level electrical experience. Talented at inspecting, repairing, installing and maintaining electrical systems and subsystems. Flexible with wide range of hands-on experience. Safety-focused Electrician with 24 years of experience. Highly effective at testing electrical equipment and predicting possible electrical malfunctions. Upbeat when communicating with teammates and customers.

SKILLS

Scheduling

Electrical Equipment Maintenance

New Construction

Field installation

Electrical Repairs

Fixture Installation

Design troubleshooting

Sub-panel installation

Commercial construction experience

System Testing

Diagnostic Testing

Diagram interpretation

Job Planning

Branch circuit wiring

Quality Assurance

Safety Management

Wiring Termination Requirements

Efficient

NEC codes and codebook

Wiring diagrams

National Electric Codes (NEC)

Electro-mechanical proficiency

Test equipment operation

Electrical component repair

Excellent written and verbal communication

skills

OSHA 10 Certified

Power Distribution

Field installation expert

Industrial Automation

Troubleshooting and repairs

Commercial and industrial electrician

DC drives

Electrical Troubleshooting

Lighting Systems

Industrial electric engine repair

Knowledge of Standard for Electrical Safety

in the Workplace (NFPA 70E)

Emergency Repairs

Superior troubleshooting skills

Electrical Installation

Valid [State] driver's license

Circuit Design

Digital circuitry

AC/DC power and control systems

System diagnostics

Mechanical Aptitude

Safety procedures and regulations

Cable and wiring specialist

Diagnostics

Electrical Panel Upgrades

EXPERIENCE

Electrician, Kaiser aluminum Warrick Operations, September 2019-March 2024 Newburgh, IN

Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.

Tested continuity of circuits with testing devices such as ohmmeters, voltmeters and ammeters. Installed conduit for new wiring systems in commercial buildings. Troubleshoot dc cranes, industrial furnaces, conveyor systems, proficient in troubleshooting with plc Repaired or replaced worn or defective parts using hand tools and power tools. Connected wires to circuit breakers, transformers or other components. Constructed control panels from blueprints or schematic drawings. Ensured that all work was completed in accordance with applicable codes. Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.

Resolved safety issues related to faulty wiring installation practices in a timely manner. Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15kv level.

Responded quickly to emergency calls regarding electrical malfunctions. Developed preventive maintenance programs for lighting systems, motors and controls. Provided technical support on various types of motor control circuits including VFDs. Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.

Conducted troubleshooting operations on complex industrial machinery requiring advanced knowledge of electricity.

Installed grounding system per NEC code requirements. Assisted with the layout of large scale industrial plant projects. Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.

Prepared skhes showing location of wiring and equipment or followed diagrams during installation process.

Installed conduit, wire and motor controls.

Connected wires to circuit breakers and transformers. Traced and diagnosed electrical malfunctions using hand tools and test equipment. Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.

Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.

Directed electricians on installation, maintenance and repair on electrical wiring and equipment.

Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures. Planned and installed complicated circuit systems in both commercial and residential construction.

Worked extensively on three-phase, 277/480 volt power distribution systems. Interpreted schematics, blueprints and diagrams to complete projects on time. Interpreted blueprints and technical drawings to correctly assemble panels and control boxes. Assessed, tested and operated variety of electrical components and systems. Tested entire electrical assembly for performance levels and safety concerns. Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.

Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.

Performed electrical utility services for industrial-based and new building projects. Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.

Responded to emergency callbacks and provided onsite support. Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.

Contributed to various projects, providing value to department, company and client base. Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.

Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.

Oversaw project details and adhered to diagnosis, wiring and OSHA regulations. Collaborated with architects and electrical and mechanical engineers on continuous improvement efforts to optimize reliability and value. Leveraged drawings and manuals to design and implement electrical systems for new installations.

Troubleshot EMCS and variable frequency drive systems to correct and rectify issues. Participated in pre-construction meetings to negotiate prices, terms of sales and service agreements.

Performed troubleshooting and diagnosis on malfunctioning systems or components. Pulled insulated wires or cables through conduits to complete circuits. Installed leads and connected cables to motors, apparatus and equipment. Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes. Diagnosed malfunctioning wiring using test equipment to locate faults. Dismantled electrical components using hand tools to disconnect and restore wiring connections.

Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.

Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.

Installed conduits or pipes inside partitions, walls or other designated, concealed areas. Used power construction equipment, measuring devices and testing equipment to complete electrical installations.

Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.

Trained workers to install, maintain and repair electrical equipment and fixtures. Planned layout and installation of wiring and fixtures based on project specifications and building codes.

Addressed and resolved worksite safety hazards to reduce risk. Reviewed blueprints to determine electrical component and wiring locations. Supervised apprentices and assessed completed tasks, offering guidance and encouragement.

Led teams and delegated tasks to install, maintain, or repair electrical systems and wiring. Fabricated parts according to specifications using hand and power tools. Advised management on issues of safety in continued equipment operation. Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.

Multicraft Maintenance, Lock Joint Tube, September 2011-May 2019 South Bend, IN

Performed preventive maintenance on equipment and machinery to ensure optimal operation.

Conducted daily inspections of all equipment, identifying any necessary repairs or replacements.

Executed minor repairs and adjustments to machines as needed. Monitored production processes for potential problems and took corrective action when necessary.

Replaced worn or defective parts in machines, using hand tools and power tools. Assisted with the installation of new equipment and systems. Ensured that all safety protocols were followed while performing maintenance tasks. Diagnosed mechanical issues by running tests, troubleshooting malfunctions, and making repairs as required.

Performed routine lubrication of moving parts on machinery in accordance with manufacturer's instructions.

Calibrated components according to established standards and procedures. Maintained accurate records of all maintenance activities performed on each machine or system.

Repaired electrical systems, including wiring connections, switches, relays, motors. Cleaned work areas after completing repair projects. Ordered replacement parts as needed from approved suppliers and vendors. Responded promptly to emergency situations involving malfunctioning machinery or other facility-related issues.

Provided technical advice and assistance to other departments regarding maintenance operations.

Followed all safety guidelines when working with hazardous materials such as chemicals or fuels.

Operated forklifts to transport heavy items around the facility. Stored spare parts safely in designated areas according to company policy. Participated in regular staff meetings to discuss progress on ongoing projects. Assisted in training new staff members on proper use of machinery and safety protocols. Operated hand and power tools to complete repairs. Maintained clear and safe workspace areas to meet OSHA standards. Installed new systems, replacement parts and components to maintain proper operation. Scheduled preventive maintenance programs to keep equipment in good working condition. Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.

Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.

Read and interpreted equipment and work orders to properly perform required maintenance services.

Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.

Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.

Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.

Checked electrical components to identify defects and hazards and make necessary adjustments.

Completed basic carpentry tasks and installed shelves, hooks and closet rods to meet customer needs.

Collaborated with building managers to assess ongoing needs and plan preventive maintenance schedules.

Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.

Disassembled appliances to diagnose problems and facilitate repairs. Replaced wall sockets, ran lines and completed basic carpentry to finish installations. Implemented diagnostics to identify failures, determine parts and material requirements and facilitate repairs.

Inspected machines before and after use to verify optimal performance. Performed routine checks on machines and identified possible problems. Inspected and tested damaged machine parts and reported parts and repair needs to supervisors.

Fabricated, tested and installed replacement parts and removed damaged or malfunctioning parts.

Routinely inspected equipment for preventive and emergency maintenance needs. Provided top quality control to eliminate maintenance downtime. Monitored property and vehicle cleanliness and adhered to preventive maintenance schedules.

Safeguarded vehicle functionality with timely execution of corrective and preventive maintenance processes.

Reviewed technical publications to keep up with updates and repairs. Employed best maintenance and safety practices with minimal complaints, incidents or lost-time accidents.

Operated large machinery, power tools and hand tools when performing repairs and installations.

Followed instructions regarding duties and assignments for facility and machinery maintenance.

EDUCATION AND TRAINING

Journeyman's License

Electrical Motor Repair, Vincennes University, Vincennes IN July 2010 Started apprenticeship for two and a half years then company shut the doors.

Contact this candidate