CURRICULUM VITAE
ANBARASAN S
SAPID/IPMT WELDING/PIPING INSPECTOR
CSWIP-3.2.2,ASNT LEVEL-II,BGAS GRADE-2
OIL&GAS, PETROCHEMICAL REFINERY
SAUDI ARAMCO/BAPCO APPROVED
SAP NO-80007063
ad5uu1@r.postjobfree.com
Personal Data
Name : Anbarasan S
D.O.B : July 25, 1979
Marital Status : Married
Citizenship : Indian
Passport # : W8933185
Language known : English, Tamil, Hindi
Permanent Address : No. 6, Karudakampa Street,
Udayarpalayam – 621 804,
Ariyalur Dist,
TamilNadu, India
Contact No. : +91-877*******
Skype Id : anbarasan.samikkannu
Educational Attainment
Academic Qualifications
Bachelor of Engineering in Mechanical (B.E. Mech)
University of Madras, Chennai, TamilNadu, India.
Membership
Saudi Council of Mechanical Engineer (SCE-444831)
Certification
CSWIP-3.2.2- SENIOR WELDING INSPECTOR WITH RTFI (TWI-UK)
BGAS-CSWIP PAINTING INSPECTOR-GRADE-2 (TWI-UK)
ASNT NDT LEVEL-2 (RT, UT, PT, MT & RTFI)
CQI & IRCA QMS LEAD AUDITOR ISO 9001-2015
QUALITY AWARENESS PROGRAM ISO 9001:2000 – MOODY INTERNATIONAL
Special Skills:
AUTOCAD 2000, MS Word, MS Excel, CNC Programming.
Bahrain valid Driving License
India Driving License
Work Experience (More than 17 years)
During my long time exposure, I have been in the field of Inspections & Testing since last 17 years in the field of Oil & Gas Petro Chemical Refinery in different international locations such as Middle East, North Africa, India. Under ARAMCO, BAPCO, Sirth Oil Company, Cairn Energy for various type of projects such as Refinery Construction Site & upgrade projects, Cross Country Pipeline Projects, Offshore Platforms Prefabrication Yard,Piping Prefabrication Shop Big Bore and Small bore,Valves Pressure Testing Shop Control Valve and Mechanical Valve etc.In these all above projects I have been worked as a Client IPMT,PID QA/QC Welding/Piping Inspector,Welding/Painting Inspector, QA/QC Welding/Painting Consultant,QA/QC Supervisor. I have knowledge of various international codes, standards & specifications such as ARAMCO standards, Shell Dep, NACE, BGAS-CSWIP, ASME, ASTM, etc. e.g. ASME SEC II,V,VIII & IX ASME B31.3 etc.
Client : Bapco
Company : Worley
Designation : IPMT Mechanical Inspector (Welding/ Piping)
Project : Bapco Modernization Project
Duration : April 2021 to April 2024
Location : Bahrain
Client : Saudi Aramco
Company : Applus +Velosi
Designation : SAPID Mechanical Inspector (Welding/ Piping)
Project : North Gas Compression Pipeline and Plant
Duration : Nov 2019 to Mar 2021
Location : Saudi Arabia(Haradh)
Client : Saudi Aramco
Company : Applus +Velosi
Designation : SAPID Mechanical Inspector (Welding, Painting)
Project : Shaybah Crude Stabilization at ABQAIQ Plant
Duration : Jan 2017 to Oct 2019
Location : Saudi Arabia
Client : Saudi Aramco
Company : Applus+ Velosi
Designation : SAPID Mechanical Inspector (Welding and Painting)
Duration : Jul 2014 to Nov 2016
Project : Petro Rabigh Phase II Petro Chemical Plant (Cumene &
Phenol, Nylon6)
Location : Saudi Arabia
Client : Cairn Energy
Company : Leighton Welspun
Designation : QA/QC Welding/Painting Consultant
Duration : Jul 2012 to Dec 2013
Project : Power Plant
Location : India (Rajasthan Barmer)
Client : Saudi Aramco
Contractor : Al Suwiket Support Services
Designation : QA/QC Painting Inspector
Duration : Jun 2011 to May 2012
Project : Duba Bulk Plant Tank Painting
Location : Saudi Arabia (Duba)
Client : Saudi Aramco
Contractor : Al Suwiket Support Services
Designation : QA/QC Painting Inspector
Duration : Jan 2011 to May 2011
Project : Sea Water Treatment Expansion Project
Location : Saudi Arabia (Tanajib)
Client : Sirte Oil Company
Contractor : Punj Lloyd Ltd
Designation : Welding/Painting inspector
Duration : Oct 2009-Dec 2010
Locations : North Africa (Libya)
Client : Saudi Aram co
Contractor : R.H. Al-Marri & Sons Co.
Designation : Welding/Painting Inspector
Duration : AUG 2006 – Sep 2009
Locations & Projects : SAUDI ARABIA
1. Abqaiq All Maintain Potential Project
2. Various Shaybah Pipeline Maintain Potential Project
3. Qatif Pipeline Rehabilitation Project – Phase V (PRP V)
4. Khursaniyah Pipelines & Communication Project
5. Utmn Khuff Gas well 1863 & 1864
Client : Saipem
Contractor : Socotherm Middle East Pipe Coating Contractor
Designation : Welding/Painting Inspector
Duration : MAY 2003 -JUN 2006
Locations & Projects : MESAIEED – QATAR
Dolphin Energy Limited (DEL)
EPC2C/EPC2F-Midstream, EPC2B-Sealine Project
Company : MIP (Madras Industrial Products)
Job Duration : JUL 2001 –APR 2003
Designation : QA/QC Engineer
Location : Chennai (India)
Roles and Responsibilities (Welding)
Worked as a PMC role at BAPCO
Reviewing and approving Contractors and Subcontractors Inspection & Test Plans, quality Control Procedures and testing procedures.
Conducting regular site walk-throughs with fabrication yard management team to highlight quality and safety issues and identify areas for improvement.
Reviewing and validating tests results related to inspection points
Reviewing and approving project and contractor quality documents and quality personnel
Welding Procedure Specification (WPS)/Procedure Qualification Record (PQR)/Weld Plans Review of Material Test Certificate (MTC) and issuing Dispatch Instruction (DI) clearances.
Monitor all site and fabrication yard welding activities and ensure that all welding joints were welded as per approved WPS’s.
Checking the purging requirement for SS and Alloy steel pipe. Also, to check purging gas type (mostly argon gas is used for purging), purging gas pressure/flow rate.
To check the root faces for visual defects and verify that inter-run cleaning is done for the removal of slag.
Checking of size and type of electrodes used, if they are according to the WPS or not.
Making sure the weld area should be properly covered by using a fire blanket or other means.
Verifying inter-pass temperatures, that do not exceed the level as mentioned in the WPS. (Infrared thermal gun is used to measure the Inter-pass temperature).
Checking weather conditions, if there is heavy wind or rain welding should not be carried out.
Observing welding conditions for root run/hot pass and all subsequent run, and inter-run cleaning.
Checking welding processes and all related variable parameters. (voltage, amperage, travel speed, etc.)
Witness all contactors’ welders’ qualification tests and evaluate their visual and NDT results.
Witness all site or fabrication yard NDT daily activities, carry out interpretation for test results, and evaluate the finding outs.
Visual inspections of weld joints for Piping, Pipeline, Structural. Inspection of Materials and Consumables, Valves Hydro testing, Post Weld Heat Treatment [PWHT]. Report daily to QA/QC Coordinator/ Engineer and advise him on the main contractor compliance to contract procedures and standards and any matters effecting quality.
Roles and Responsibilities (Painting/Insulation)
Review and understand the requirement of the project Coating & Insulation Specifications,ITPs,QCPs,MS etc.
Inspection & Testing of the in-progress work to ensure compliance with the project specification requirements.
Ensure effective implementation of ITPs or ITRs by the contractor and client attendance at witness and/or hold points.
To provide technical supports to company and contractors QC personnel as required.
Ensure all personnel employed are Skilled and passed the Qualification Test and performing proper surface preparation, Coating Application and Insulation Installation.
Reviews and assesses Contractor/Subcontractor QA/QC Plans and Procedures including Test/Inspection results.
Ensure contractor/subcontractor have relevant, up-to-date Codes, Standards, Specs, and Contract documents.
Ensure all the Testing Equipment’s functioning properly and have Valid Calibration.
Preparing Disposition Plan for any Non-Conformances occurred during ongoing works and Technical Support in order to reply Site Technical Queries.
Promotes Safety awareness and safe performance among Production group, including Contractor personnel.
Witness and monitor Contractor/Subcontractor site surveillance QA/QC activities.
Conversant with Inspection Techniques such as Surface Cleanliness/Profile check, Soluble Salt Test, WFT & DFT Checks, Adhesion test, MEK Test, Holiday Detection Test etc... As per the industry standards.
Prepare punch list items, ensuring they are being resolved according to the turnover system.
Overseeing the Development of the Blasting, Painting and Insulation Systems Integrating Quality, Occupational Health/Safety and Environmental requirements.
Reports to the QA/QC Manager or Department Head and prepare Daily, Weekly & Monthly site report, highlighting weekly accomplishments and issues that affect product quality.
Declaration:
I hereby declared that the above all furnished information’s are true to the best of my knowledge and belief.
Anbarasan S