Team Leader High School

Joseph L. Day

**** ****** **** ** ***** 256-***-****

Fruithurst, AL 36262 Cell 256-***-****

To establish employment with a stable company that will allow me to advance in the future.

Certified Welding Specialist, Certified Hydraulic Operation and Maintenance, Certified on Air Pneumatic Valves on Boilers, Certified on Steam Presses. Forklift Mechanic, Rebuild and Repair work on all types of engines, front-ends and rear-ends (i.e.: cars, trucks, semi-trucks, and forklifts).

Secret-DISCO (10/31/2020)

1977 – 1982 Cleburne County High School

1978 – 1982 Cleburne County Vocational School

1982 Welding Certification at Chicago Bridge & Iron

2000 Pneumatic Certification at Carroll Tech

2000 Hydraulics Certification at Carroll Tech

2009 AKO Account

2009 – 2010 Military Certified Forklift & Heavy Vehicle License

2010 CRC Certified

2010 CAC Card

2010 SAMS Training (Sustainment Army Maintenance System)

2010 – 2011 ISO 9001 Certification Training

2009 – 2010 DOD Information Assurance Awareness

2014 – Present International Automotive Components Anniston, AL

Maintenance Team Leader

My duties as a Team Leader includes assigning work tasks and pm for my team. Duties that I am required to do within this position are as follows:

Hydraulics and Pneumatics valves

Overhead cranes

Blueprint and Schematics

Web liner, Net liner, and husky, fanuc, and ABS robots

Perform preventative maintenance on injection molds

Troubleshoot and perform repairs on hydraulic cores

Troubleshoot and repair electrical wiring in injection mold including manifold systems and ejection systems

Disassemble defective equipment for repairs using hand tools

Troubleshoot and diagnose problems for any worn parts or malfunctions in molds

Translate schematics to determine required repairs

Troubleshoot water flow in injection molds

Solder, wrap, and coat electric wires to ensure proper insulation

Troubleshoot and diagnose problems for injection molding machines including UBE, Husky, Nissei, and Krauss Maffei

MiG, stick welding, and fabrication for various projects.

Troubleshoot and diagnose problems with PLC.

Perform maintenance and preventative maintenance

2009 – 2013 Ranger Land Systems Huntsville, AL

Logistics Technician

Duties that I am required to do within this position are as follows:

Subcontractor to SAIC with MRAP Maintenance Support Facility (MSF) in Kuwait.

Worked in supply warehouse inventory control and maintaining accountability of processing, stocking and receiving of shipments of various MRAP models (Buffalo, Caiman, Caiman Plus, MATV, Max Pro, Max Pro Plus, RG31, & RG33).

Assisted in development, implementation and sustainment of the bench stock system.

Accountable for the handheld electronic inventory system, including but not limited to the weekly reports of all bench stock parts issued and received daily.

Performed the daily ordering (with the use of FED Log & SAMS), daily stocking, organizing, assigning bin locations, & issuing stock for all variants of MRAP models.

Maintained accountability of inventory for over 2200 lines in stock.

Charged with responsibility of organizing, delegating responsibilities, and reports during the process for the ISO Certification of bench stock, which contributed to its overall success.

2009 – 2013 Ranger Land Systems Huntsville, AL

Heavy Equipment Mechanic Senior

Duties that I am required to do within this position are as follows:

Performed unit maintenance on all variants of heavy wheel vehicles, MRAP models listed (Buffalo, Caiman, Caiman Plus, MATV, Max Pro, Max Pro Plus, RG31, & RG33), (prime mover designated as more than 5 tons and their associated trailers).

Maintained compression ignition engines, fuel systems, air induction systems, electrical systems, Chassis exhaust system, liquid cooling systems, starting systems, charging systems, chassis, electrical systems, transmission, transfer, propeller shaft, axle assemblies, brake systems, wheel assemblies and material handling equipment hydraulic systems.

Analyzed malfunctions, operated and repaired, rebuilt and maintained power equipment, such as cranes, power shovels, scrapers, motor graders, back-hoes, track-hoes, trench digging equipment, conveyers, bull-dozers, pumps, compressors, and pneumatic tools, performed the most complex troubleshooting, diagnosis and repairs on complex tactical and combat weapons platforms.

Demonstrates in-depth organizational support level knowledge of one or more weapons systems. Has utilized technical material to determine operational parameters configuration requirements and characteristics. Researched technical issues in support of field operation personnel. Maintained configuration databases. Can classify and identify weapon system components. Provide organizational level battle damage assessment. Edited reports, publications, and correspondence to ensure clarity of content, consistency of format and accuracy of grammar. Participated in maintaining technical manuals. Assisted with validation, verification, discrepancies, deficiencies resolution, and accuracy adequacy assessment.

2004 – 2009 Carlisle Tires & Wheels Heflin, AL

Maintenance Supervisor

My duties included assigning work tasks, installing machinery, repairing and rebuilding fork lift engines & rear-ends, forklift & heavy equipment operator, air value specialist, welding (i.e.: fabricated parts for repairs). Hydraulic operation & maintenance. Repaired steam presses.

1994 – 2004 Hoover Haynes Tallapoosa, GA

Mill Operator & Maintenance

My duties included electrical work (480 & 243 phase), Heavy equipment operator, set heavy equipment (i.e.: gear boxes and 2300 motors), mill operator, installing & repairing machinery, pulling and rebuilding truck engines & forklift motors, welding (i.e.: fabricated parts for repairs), hydraulic operation and maintenance and rebuilt 100-inch corrugated mills.

1985 – 1994 Associated Rubber Company Tallapoosa, GA

Supervisor, Mill Operator & Maintenance

My duties included operating the mills that produced rubber materials and performed maintenance on the mill equipment as needed.

1984 – 1985 Southern Tool Oxford, AL

Saw Operator

My duties included certified welder, rebuilding and pulling front-ends, rear-ends, charging air conditioners, replacing compressors and components on air conditioners and cutting parts.

1980 – 1984 Heflin Manufacturing Heflin, AL

Cutting Room

My duties included cutting various types of fabric material

.

Royce Mairer, SAIC, Supervisor, H: 912-***-****

Steve Nunn,IAC,Lead 256-***-****

Paul Williams, SAIC Lead, Kuwait 912-***-****

John Blair, EPASS, Owner/Manager 256-***-****

Tommy Chambers, Carlisle Tires & Wheels, Maintenance Manager 770-***-****

Dan Spurling, IAC maintenance tech 256-***-****

Objective

Security

Clearance

Qualifications

Education

Training

Professional

Experience

References

Contact this candidate