Quality Engineer Team Member
Resume:
David Woessner
**** ****** ***** ***********,
Texas 76063
**********@*****.***
Work Experience
Lead FAI reviewer- THAAD QE Specialist/FAI & Design Reviewer
Lockheed Martin
August 2014 to 2016
Interface between Lockheed Martin Sites and Army Customers. Lead for closure of the Site and Program FAI Plans. Creator of Design Change requests thru EPDM.
Senior Lead QE
Lockheed Martin
August 2013 to August 2014 on an Rocket Alternative Warhead program, providing Technical and managerial support to the program and three major subcontractors and their sub tier product supplier. Prime Team member during Pilot line Verification (PLV), Physical Configuration Audits (PCA) and Manufacture Readiness Level evaluations 8&9(MRL). Successfully entered into the MRL9 level
Key Lead QE
Lockheed Martin
TDY, offsite at BEA facility - Sealy, TX February 2013 to August 2013 in Sealy Texas, as a team lead I was responsible for the assembly of the JLTV trucks and the initial FIR sell off of those trucks to the Government DCMA at Sealy. After completion of the final buy off I returning to Dallas, TX and was key person for the preparation of all Final Inspection Record (FIR) data and Vehicle configuration for DD250 sell off to Government DCMA Dallas. Completed assembly and sold off 23 trucks, 6 weeks before scheduled completion date. Awarded three Recognition Awards for my direct and continuous dedication during the entire JLTV procurement, assembly and FIR buy off process.
Quality Engineer Specialist (SME LEAD Quality Design Reviewer for the JLTV Vehicle)
Lockheed Martin
IRAD and EMD - Sealy, TX
December 2011 to January 2013
Assisted BAE during their organization and reconfiguring for their assembly line to support LM JLTV truck assembly. Also performed audits of the BAE assembly and paint lines for the LM JLTV Truck.
Senior Supplier Quality Engineer Sr. (Lead, FAI & Supplier interface.)
Lockheed Martin
LM Missiles - Lufkin, TX
August 2011 to November 2011
TX. Supporting numerous major LM Missiles program products thru received, assembling and shipped process (PAC3, THADD, 4 PAC, Japan Production, GMLRS and MLRS) programs.
I was the Point Of Contact for all supplier product issues relating to any questionable or discrepant supplier hardware being received at this facility.
Quality Engineering Specialist
Lockheed Martin
2009 to 2011 position as a SME Quality Design Reviewer on both the Common Controller Device (CCD) and MULE program (driverless vehicles). Responsible included; QE oversight for the Product Development Rapid Responses manufacturing, supporting machining, assembly, and inspection of hardware and key QE person for design review buy off, build up and acceptance of the test equipment for these programs.
My previous opportunities;
Supplier Field Quality Engineer
LockheedMartin
SQFE - Cincinnati, OH
2005 to October 2009
I participated in numerous supplier continues Improvements and Kazan events on their surface Mount Technology, product production lines and systematic procedural changes. Lead a bi-weekly communication meeting with senior vice president and program management. Lead a weekly Quality 101 discussion with supplier QA and Manufacturing personnel that supported the LMFC program. I provided interface support four major GMLRS Missile products, one emerging program. Provided weekly status charts to the individual home based program teams. AS creditable accept to this Supplier I participated in FOS's internal production meetings, insuring requirements of the individual LM programs were keep in focus, reviewed purchase order requirements and reviewed drawing change with this team. I'm an active member of the suppliers Material Review Board. My experiences with Kazan events, QA procedures, special processes, SPC and QA Management have been a major contributor to this supplier continues product improvement. FOS recognized me in 2008 for my participating in four Lean/Kaizen events. Provide home base program management with the most up to date data necessary to evaluate the quality/reliability risk to their program.
Member of the Production IPT
Lockheed Martin
2004 to 2005
Program Quality Manager UK Launcher for development of a high speed electric drive and support system for the British MLRS Launcher platform. Mutable Tasks were; lead Member of the Production IPT, supplier liaison, QA cost account manager, and design reviewer. Utilizing my lesson learned in other programs, I alerted program management of the potential that this supplier was problematic and needed continues oversight to be successful. Even after months of direct in house LM support, this supplier product was removed by the Prime Contract.
Program Quality Manager GMLRS EMD/SDD PQM Program QA Manager
Lockheed Martin
2002 to 2004
QPM) supporting a new design GMLRS Rocket payload and motor. QA cost account manager for both the basic GMLRS and Unitary SDD programs. Instituted useful defect report matrix, Participated in Six Sigma events both internal and at supplier, domestic and European. Negotiated and was instrumental in being awarded a follow on development and Low rate production contracts. Currently this product is still in Production and a major product of the MLRS family of rockets. The rocket/system proven to be a weapon of chooses early on in the current mid-east conflict. During development the program had direct in-house interface with foreign counterparts from England, France, Italy & Germany.
Program QE Specialist
Lockheed Martin
1999 to 2002 preformed design review, product development and interface with supplier, development of special processes, tooling and acceptance criteria on the GMLRS DIPICM and Unitary rockets. I converse at the level required to convey design requirements with the supplier base, from the Circuit card to a simple machine parts. Communicated as part of the Integrated Product Teams that consisted of NATO members, Government Project office and suppliers as necessary.
Specialist, QE Design reviewer
Lockheed Martin
1994 to 1999
Supplier Quality/GD&T SME and MRB (Material Review Board) sign off authority on all mechanical, electrical and electronic design changes and concepts. Program Team member that interfaced with every aspect of EMD product design, development and integration verification at LM Camden facility. Worked directly with the program supplier base to insure that the design requirements are understood and the supplier was capable of producing the produce under contract. In 1997 I volunteered to be the program offsite representative at a supplier during the design development and testing of a new a combo Break/Transmission use on the M270 Launcher. I was considered SME lead authority for emerging designs.
QA Design Reviewer-GD&T Level 4 Specialist
Rocket - Dallas, TX
1985 to 1994
I have been identified as a person that takes care of issues, supplier or internal. Numerous times have been asked by upper management to "Just take Care of it!" and I do just that! Presently having a Secret Clearance
Education
Professional Training programs Airframe/Hydraulics on Navy aircraft (F8 / F4 /P2V12/ P3C Flight Engineer /EA6B / A6C )
Technical Courses: welding inspector, Electron beam wedlder
Architectural Design & mathematics
Skilled in:
•Manufacturing
•Management
•Architecture
•Quality control
•Injection Molding
Contact this candidate