Mechanical Engineer Engineering
Resume:
ABOUT ME
I have been working as a *ST-grade mechanical engineer of the engineering organization in Tehran/Iran for 17 years in different consultant engineering firms as a heat and fluids mechanic engineer in the field of designing HVAC, piping, and plumbing systems for various types of buildings such as residential, commercial, medical, and industrial centers for different organizations. I have sufficient mastery of ASHRAE standards and relevant software such as AutoCAD, Revit MEP, HAP, Pipe Net, and Duct Sizer and have completed various projects in this field. In addition to presenting design in the field of construction, I have also been responsible for various HVAC projects in industrial places such as the steel industry. The proposed designs mainly include plumbing drawings for water consumption, sewage, sewage vent, heating, and cooling systems, ducting, heating and cooling load calculations, selection of air conditioning systems and engine room equipment, etc. EDUCATION AND TRAINING
MASTER OF SCIENCE IN HEAT&FLUID MECHANICAL ENGINEERING, NUCLEAR REACTOR ENGINEERING
ISFAHAN UNIVERSITY [ 23/09/2013 – 23/09/2015 ]
Address: AZADI SQUARE, ISFAHAN, 817-***-****, isfahan (Iran) https://ui.ac.ir/
Field(s) of study: nuclear reactor engineering
Final grade : master of science
Thesis: The effect of gamma ray on the shelf life of cucumber This was a two-year course in the field of heat transfer and fluids mechanic theories in nuclear reactors. I graduated with a grade point average of 17. The dissertation of this course was to increase the shelf life of cucumber as a result of gamma radiation, which can have many commercial applications. REZA KHALILISAMANI
Nationality: Iranian
Date of birth: 11/02/1974
Gender: Male
Email address: *.***********@*****.***
Whatsapp Messenger : 009************
Viber : 009************
LinkedIn : https://www.linkedin.com/in/reza-khalilisamani-b24014bb/
Instagram : https://www.instagram.com/hvac_revit_designer/
Address: FOOLAD HORMOZGAN BANDARABBAS CITY, (Iran)
Address: TEHRAN, (Iran)
1 / 6
BACHELOR OF SCIENCE ENGINEERING, IN HEAT&FLUID MECHANICAL SHIRAZ UNIVERSITY [ 23/09/1992 – 23/09/1998 ]
Address: ENGINEERING COLLEGE, NAMAZI SQUARE, Shiraz (Iran) https://shirazu.ac.ir/
Field(s) of study: HEAT AND FLUIDS
Final grade : BACHELOR OF SCIENCE
Thesis: Temperature distribution in the exhaust gases of the gas turbine In this period, I completed all basic courses including mathematics, physics, differential equations also the main courses including fluids, heat transfer, thermodynamics, engineering mathematics, and then specialized courses including heat exchangers, air conditioning systems, gas turbines, jet engines, power plants, and water transfer systems. in the end, I presented my dissertation on the analysis of the temperature distribution of exhaust gases from gas turbines.
CERTIFICATE OF EMPLOYMENT IN ENGINEERING
Certificate of employment in Tehran Building Engineering System Organization in the field of building mechanics facilities
[ 20/03/2001 – Current ]
Main responsibilities(FREELANCE):
Obtaining mechanical installations and HVAC projects as a design engineer from various companies and employers and providing them with designed documents according to the regulations of the Tehran Engineering System Organization. preparing heating and cooling load calculations notebook and drawings of the plumbing and piping systems, air ductworks, engine room details, and system calculations notebook with suitable software such as HAP, AUTOCAD, REVIT, and PIPENET Sample of projects:
- Design of HVAC system for Gilan microbiology cleanroom building using REVIT MEP software
- Design of mechanical installation system for the Arak Dispatching Office Building using REVIT MEP and AUTOCAD software using AUTOCAD AND REVIT MEP (chiller and fan coils system)
- Designing HVAC system for Niayesh Hotel using AUTOCAD AND REVIT MEP in Tehran in teamwork
(TARH&AFARINESH CO.)
- Monitoring the implementation of gas piping 0.25 PSI Name of unit or department: Mechanical engineering Business or sector: Water supply; sewerage, waste management, and remediation activities Unit 10, MAHESTAN ST., SHAHRAKE GHARB(WEST TOWN), TEHRAN, 144*******, Tehran, Iran Contact email: ****@****.**
Website: https://www.tceo.ir/
2 / 6
WORK EXPERIENCE
FLUID MECHANICAL AND HVAC ENGINEER DESIGNER
ISFAHAN MOBARAKEH STEEL ENGINEERING CO. [ 10/11/2020 – Current ] Address: Sarabchi Alley, Mulla Sadra St, Saadat Abad St, Azadi Square 13 km of Shahid Rajaei st., 816-***-**** ISFAHAN (Iran) - https://www.mse.ir/
City: BANDARANBBAS
Country: Iran
Email address: ****@***.**
Name of unit or department: ENGINEERING - Business or sector: Manufacturing Main responsibilities:
Designing projects defined in Hormozgan Steel company (HOSCO) site located in Bandar Abbas city in the field of fluid mechanics, industrial piping, and HVAC systems for Mobarakeh Steel Company of Isfahan and preparing maps and documents required in the basic, detailed stages and attracting a contractor as an EPC or PC project
Sample of projects:
- Design of a pressurized defoaming system for the surface of industrial treatment plant equipped with special nozzles
- Design of compressed air pipeline of central repair shop
- Design of water and sewage pipeline in the contractors' camp area FLUID MECHANICAL AND HVAC ENGINEER DESIGNER
TARH & AFARINESH ENGINEERING CONSULTANT (PRIVATE CO.) [ 23/10/2019 – 20/04/2020 ] Address: Unit14, line 6, Iranzamin st., west town (shahrak gharb), Tehran, Tehran (Iran) - www.tarh-afarinesh.com City: Tehran
Country: Iran
Email address: ****@****-*********.***
Name of unit or department: Mechanical and hvac engineering - Business or sector: Electricity, gas, steam and air conditioning supply
Preparing HVAC and plumbing phase 1 and 2 documents, Heating cooling load calculation for various buildings, calculation and selection of boiler room equipment such as boilers and pumps, calculation and selection air handling unit system for buildings, designing and drawing piping, and plumbing system for building, Preparation of building ducts drawings, design and drawing plumbing system for buildings FLUID MECHANICAL AND HVAC ENGINEER DESIGNER
BAKHTAR OMRAN ENERGY CONSULTANT(PRIVATE CO.) [ 21/05/2016 – 21/04/2019 ] Address: Unit 3, no 3, ravandi line, Fatemi st., Tehran, 141******* Tehran (Iran) City: Tehran
Country: Iran
Name of unit or department: Mechanical and hvac engineering - Business or sector: Water supply; sewerage, waste management and remediation activities
Preparing HVAC and plumbing phase 1 and 2 documents, Heating cooling load calculation for various buildings, calculation and selection of boiler room equipment such as boilers and pumps, calculation and selection air handling unit system for buildings, designing and drawing piping, and plumbing system for building, Preparation of building ducts drawings, design and drawing plumbing system for buildings 3 / 6
FLUID MECHANICAL AND HVAC ENGINEER DESIGNER
FREELANCE [ 04/12/2013 – 21/05/2016 ]
City: Tehran
Country: Iran
Designing and supervising the projects of building mechanical installations and low-pressure gas piping(0.25 PSI), which was entrusted to me by the Tehran Province Building Engineering System Organization FLUID MECHANICAL AND HVAC ENGINEER DESIGNER
MOSHANIR ENGINEERING CONSULTANT (MINISTRY OF ENERGY) [ 21/12/2004 – 04/12/2013 ] Address: NO.1, SHADI LINE 1, ACROSS HOMA HOTEL, KHODAMI ST., VANAK SQUAR, 199******* tehran (Iran) - ht tps://www.moshanir.co/
City: tehran
Country: Iran
Email address: ****@********.**
Name of unit or department: Mechanical and hvac engineering - Business or sector: Electricity, gas, steam and air conditioning supply
Main responsibilities:
Designing, supervising, and reviewing mechanical and HVAC systems for industrial construction projects related to the Ministry of Energy, including gas, combined cycle, steam power plants, and Electric substation. Also preparing related documents such as design criteria, piping arrangement, P&ID, MTO, design calculation notebook, and contractor documents according to the oil & gas field code and regulations.
Sample of projects:
- Design of mechanical and HVAC system for buildings of Jahrom city combined cycle power plant
- Design of mechanical and HVAC systems for Tehran Electric substations FLUID MECHANICAL AND HVAC ENGINEER DESIGNER
KHANEHSAZI IRAN ENGINEERING CONSULTANT (SOCIAL SECURITY ORGANIZATION) [ 08/06/2002 – 21/12/2004 ]
Address: NO 34, SAZMAN AB, SHOHADA ST., DAEEMI ST., FATEMI ST.,, tehran (Iran) - https://khanesaziceco.ir/ City: tehran
Country: Iran
Email address: ****@**************.**
Name of unit or department: Mechanical and hvac engineering - Business or sector: Construction Main responsibilities:
Designing, supervising, and reviewing mechanical and HVAC systems for industrial construction projects related to the Ministry of Energy, including gas, combined cycle, steam power plants, and Electric substation. Also preparing related documents such as design criteria, piping arrangement, P&ID, MTO, design calculation notebook, and contractor documents according to the oil & gas field code and regulations.
Sample of projects:
- Design of mechanical and HVAC system for buildings of Jahrom city combined cycle power plant
- Design of mechanical and HVAC systems for Tehran Electric substations 4 / 6
English
LISTENING B1 READING B2 WRITING B2
SPOKEN PRODUCTION B1 SPOKEN INTERACTION B1
FLUID MECHANICAL AND HVAC ENGINEER DESIGNER
PARS MOHIT ENGINEERING CONSULTANT (PRIVATE CO.) [ 20/03/2000 – 08/06/2002 ] Address: UNIT2, NO 3, DELARA ST., INTERSECTION OF VALIASR AND BEHESHTI ST., 159******* tehran (Iran) City: tehran
Country: Iran
Name of unit or department: Mechanical and hvac engineering - Business or sector: Electricity, gas, steam and air conditioning supply
Main responsibilities:
I started my work as a volunteer in this firm. The responsibilities assigned to me included performing heating and cooling load calculation reports for projects, learning how to prepare plumbing systems and ductworks.
Sample of projects:
- Design of mechanical and HVAC system Iranshahr residential complex CERTIFICATES
JOB RELATED CERTIFICATES
[ 01/01/2000 – Current ]
· 1st grad Employment license for design and supervision of building mechanical facility belonging to the Tehran Building Engineering System Organization
· Mechanical Installation of High-Rise buildings (Introductory)
· Regulations of Energy Saving in Construction of Building
· Design and supervision of water and sewage piping systems
· Design of low-pressure gas pipes (0.25psi) for buildings DIGITAL SKILLS
Heating and cooling load calculation for the building using HAP and REVIT software / Designing and drawing plumbing and piping systems using AUTOCAD and REVIT software / Designing and drawing of duct systems using AUTOCAD and REVIT software / Three-dimensional drawing of mechanical systems using REVIT software
/ Preparing workshop, as-built, and executive drawings / Analysis of water pressurized piping network by pipe net software / HVAC Software HAP Duct Sizer Pipe Sizer / HVAC design and drafting / HVAC load calculation - Ventilation calculation / Microsoft Office: Word, Excel, Access, Power Point, Outlook. / 00 20
00
20 High efficiency in
using the revit program / Heating, Ventilation and Air-Conditioning (HVAC) / Air Handling Units / McQuay Duct Sizer / McQuay Pipe Sizer / familiar with PDMS / PID & PFD diagrams / HVAC / Plumbing and HVAC knowledge / PUMP, BOILER, AHU, ROFTOP PACKAGE, FANCOILS UNIT SELECTION / Chiller / Ability to use AutoCAD (Autodesk) and read Mechanical Electrical Plumbing(MEP) Drawings / Plumbing Design LANGUAGE SKILLS
Mother tongue(s): FARSI(PERSIAN)
Other language(s):
5 / 6
HOBBIES AND INTERESTS
My interests
Study of self-knowledge books
Trips and excursions with family
swimming
Tehran, Iran, 12/01/2022
REZA
KHALILISAMANI
6 / 6
Contact this candidate