Rotating Equipment Mechanical Engineering

CURRICULUM VITAE

SURESH GANESAN

LEAD EXECUTIVE OF ROTATING EQUIPMENT,

ISO CAT 2 CIRTIFIED VIBRATION ANALYST

Mobile no Qatar : +974-********

India no : +91-978*******

Email : ***********@*****.***

Skype id : aishsss1234

JOB SUMMARY:

Diploma in mechanical engineering holder with 12 years of experience in process, maintenance, commissioning pre- start up of petrochemicals and oil and gas refinery industries in both onshore and offshore sites of abroad as a Senior Mechanical Technician, Mechanical Supervisor

MAINTENANCE ACTIVITIES

Preparing work permit and take a lead.

Receive work schedule from Supervisor and co-ordinate all activities with operator to troubleshoot and to solve the problem on equipment.

Daily routine inspection with plant inspection and monitoring the temperature vibration of whole rotating equipments.

Equipment maintenance history updating and record keeping.

Responsible for repairing, troubleshooting, preventive, periodic and corrective mechanical maintenance activities of rotating equipments and static equipments. WORK EXPERIENCE:

QAPCO,(QATAR PETROCHEMICAL COMPANY),QATAR

Designation: Lead executive of rotating equipment

Period : May 2016 –Continue

ADNOC,(ABUDHABI NATIONAL OIL COMPANY), ABUDHABI

Designation: Mechanical Technician of rotating equipment Period : Aug 2007 to may 2012

HIGHLIGHTS

● GAS TURBINE ● MECHANICAL SEAL ● ALLIGNMENTS

● COMPRESSORS ● VALVES ● FIN FAN

●MEASURING INSTRUMENTS ● GEAR BOX ● PUMPS

JOB RESPONSIBILITIES

Onshore & Offshore processing plant

• Having hands on experience in preventive, productive and breakdown maintenance of all static equipment and rotating machinery used in oil and natural gas processing plants.

• Well experienced in crude stabilization unit (3phase). Gas Dehydration unit(TEG), Gas Sweetening unit (MDEA) condensate fractionation unit, Dew point Depression unit, water injection unit, Gas injection unit, unmanned platforms & offshore water maker, fire water pumps, seawater lift pumps, Gas turbine drive compressor & Booster pumps and also worked ONSHORE CNG compressor unit for British gas. Erection

• Having good erection experience in rotary equipment like air compressor, refrigeration compressor, pump and welding inspection as per the design drawing (ASME Design) Special Assignment

• Carried out combustion chamber and Hot Gas path of GE (Frame 6) and Nuvo pignone

(Frame 5) Gas Turbines under guidelines of turbine engineers. Gas turbines

• GE - Frame 6 - 32MW- Single shaft Generator Driven

• Nuovo pignone - Frame 5 - 28 MW- Single shaft Generator Driven

• Solar Turbine & Ruston Turbine - 2.0 MW, Single shaft Generator Driven Job Involved

• Assembly, Disassembly and Inspection of Turbine blades, vane segments, compressor Diaphragms, combustors, Transitions and Fuel nozzles.

• Turbine bearing changing and its oil circuit and compartment cooling equipment maintenance & Alignment of Turbine inter stage seals. Centrifugal compressors

• Worked in Dresser Clark, Dresser Rand (France), Kawasaki cooper (Japan) and Nuvo pignone (Italy) natural gas pumping and Gas lift centrifugal compressors with seal and dry gas seal system with various capacities.

• Involved in bundle changing, rotor centring, seal changing and bearing changing balancing drum labyrinth changing stage labyrinth changing, thrust collar fixing and its seal and lube oil circuit accessories maintenance. Reciprocating Air & Gas compressor

MAKE: INGERSOLL RAND, KIRLOSKAR, NUVO-PIGNONE, ATLASCOPCO.

• Dismantling and inspection of main bearing, big end bearing, small end bearing, cross head, thrust washer, oil pump gear clearance inspection as per OEM instructions.

• Cylinder side clearance, cylinder Orality inspection and piston pumping clearance, TDC,BDC inspection, suction and delivery valve, opening clearance inspection

• All these clearance inspected through the inside outside micro meter, dial gauge micro meter, bore gauge micro meter, filler gauge and lead wire

• High-pressure cut-off switch, high temperature cut-off switch, oil pressure cut-off switch, and timer setting.

Screw compressor

• Operation maintenance and troubleshooting of different makes of screw compressor like Ingersoll Rand, kirioskar Chicago pneumatic, ELGI etc.

• Having good experience in screw compressors all control systems like pressure limiting valve, pressure sensing valve, blow off valve, vent valve, shuttle valve, suction control butterfly valve with cylinder actuator, oil stop valve, air oil separator inspection and replacement.

Pumps

MAKE: WORTHINGTON ENGLAND, AND SHIN NIPPON & KIRLOSKAR .

• Handled numerous types and Design of centrifugal, Reciprocating and rotary pumps, size of the equipment vary from small to large and working in low, moderate and high temperature medium including vertical pumps. Vacuum Pump of different types. Mechanical seal

MAKE: SEALOL, JOHNCRANE, DURAMETALLIC

• Worked on all type of seals including single and double and tandem seal single spring and multi spring bellow type proper rectification of the same. Gear box

• Worked on all types of gearboxes, Attended preventive maintenance and breakdown maintenance.

• Done gear clearance setting, bearing alignment setting, oil seal checking and replacing. Alignment

• Reverse indicator method

• Rim & Face method and Laser method

Fin Fans

MAKE: HUDSON, NUOVA PIGNONE.

• Replacement of blades.

• Measure and adjust blade angle, tip clearance.

• Adjust belt tension.

Valves

Service and operation inspection of all types of valve like:

• Ball valve

• Plug valves

• Gate valve

• Globe valve

• Butterfly valve

• Blow off valve

• Diaphragm form valve

• Non return valve (Flab type & plate type valve)

• Sandwich type

• Piston type NRV Automatic Pneumatic Actuators control valve in utility department.

Measuring Instrument

Handled various types of measuring instrument which are given below:

• Dial Gauge (for alignment)

• Inside Micrometre

• Outside Micrometre

• Vernier calliper

• Sprit level

• Feeler gauge

• Vibration scanner (in mm/s)

Safety

• H2s prevention (SCBA).

• Fire safety use extinguisher (DCP, CO2, Foam and water).

• Use PPE depends up on the job.

• Using the harness depend upon the height.

• Operation of fire houses and always keep good Housekeeping

• Using the brigade tapes according to job (Red white/ yellow black).

• Follow the instruction of life borty, life craft, life boat clamming ladder life jacket. EDUCATIONAL QUALIFICATION:

DIPLOMA IN MECHANICAL ENGINEERING(PERCENTAGE:7.2CGPA) Saisha international corporate university

Kelambakkam, Chennai, Tamilnadu, India

Year of completion: 2015

National Trade certificate(NTC)[PECENTAGE-83%]

Government ITI, Ulundurpet, Tamilnadu, India

Year of Completion: July 2007

Secondary Course Certificate(S.S.L.C)[PERCENTAGE-70%] Board of Secondary Education, Tamilnadu, India.

Year of Completion: Jan 2005

ADDITIONAL QUALIFICATIONS:

Fork lift driving license

No: 289********

Validity: 30/10/2021

Ministry of interior traffic department, Qatar

Basic First Aid & CPR

Basic Fire Fighting

Confined Space Entry

Working at Height

Man lift & scissor lift

BOSITE

PERSONAL DETAILS:

Name : SURESH

Father’s name : Ganesan

Date-of -birth : 20/05/1989

Sex : Male

Marital status : Married

State : Tamil Nadu

Nationality : Indian

Religion : Hindu

Address : 2/23A, south street, Koothakudi PO

Kallakuruchi Taluk,

Villapuram District-606305

Tamilnadu, India

Languages known : English & tamil (speak,read &write) PASSPORT DETAILS:

Passport No : U0915561

Date of Issue : 19/02/2020

Date of Expiry : 18/02/2030

Place of Issue : Qatar

Emigration status : ECNR

DECLARATION:

I hereby declare that the above information is true and correct to the best of my knowledge and belief.

Place: Sincerely,

Date: G.SURESH

Contact this candidate