Environmental Health Project Management
Resume:
Ronald R. Guertin
*******@*****.**.***
Scarborough Me.04074 Cell: 207-***-****
Project Management, Engineering, Manufacturing, & Environmental Health & Safety
Expertise in Team Building, Production / Efficiency Gain, Quality & Resource Maximization
Core Competencies:
GMP (Good Manufacturing Practices) / SQF Practitioner Certified
HACCP (Hazard Analysis Critical Control Point) Certified
Project Planning & Management
Production & Assembly Operations Management
Subcontractor Negotiations
Environmental Health & Safety Engineer
Equipment Engineering
LSO (Laser Safety Officer) certified by Laser Inst. Of America
Internal auditor certified
Food Supply Chain Distribution for Hannaford / Food Lion
Million dollar tool purchases, negotiations, build specs. contracts (uptime & process requirements).
First Aid, BBP, CRP, AED Certified (Red Cross)
ISO 9000
PROFESSIONAL EXPERIENCE:
Maintenance Technician
Inn by the Sea
Bower Rd.
Cape Elizabeth Maine 7/2023 to 5/2024
Maintenance / Facilities / EHS Manager
Confluent Medical Technologies
39 Enterprise Drive Suite 2
Windham Maine 04062 10/2021 to 5/2023
Interface with manufacturing on a daily basis and determine daily manufacturing priorities.
Review maintenance goals and objectives and allocate resources as needed.
Evaluate building projects, repairs, and budget repairs and resources as needed.
Inspect production equipment for proper machine guards and safe operation of equipment.
Inspect production area for fork truck daily inspection logs, fire extinguisher inspections,
first aid & AED sign offs. Ensure PPE is properly used on the manufacturing floor.
R. Guertin page 2
Quality / EHS Manager
Plastic Industries Inc.
115 Poland Springs Drive, Poland Me. 10/2013 to 9/2021
Inspect in process material, manufacturing documentation and audit the production process.
Instructor and presenter of LOTO, SPC, HACCP, SQF, GMP and performance updates.
Inspect final assembled products, review all documentation and publish Cert. of Compliance.
Generate process flow and training aid documentation in MS Visio, MS Word & MS PPT.
Ensure all documentation meets customer, ISO 9000, GMP, FDA, OSHA & SQF requirements.
Quality Manager
Flotation Technologies 20 Morin St. Biddeford Me. 04005 9/2012 to 10/2013
Inspect incoming material based customer PRD (Product requirement documents).
Inspect in process material, manufacturing documentation and audit the production process.
Perform and record hydrostatic, destructive crush and buoyancy testing.
Inspect final assembled products and review all documentation.
Generate process flow and training aid documentation in MS Visio.
Ensure all documentation meets customer and ISO 9000 requirements.
Business Process Engineer
Hannaford / Delhaize Group / Adecco
145 Pleasant Hill Rd.
Scarborough Me. 04074 7/2008 to 7/6/2012
Process Map product distribution for the US East Coast for Hannaford and Food Lion Dist. Centers.
Interface with Management to determine one streamline efficient process flow for all banners.
Initiate, organize and deliver project planning and problem resolution activities in line with
Project Management & Process Engineering Methods.
Support Business Process Engineering activities by providing the IT Dept. with data mapping
process flows & SOPs required to produce As-Is and To-Be future state documentation.
Support the Merchandising Systems and Distribution / Retail Ops Business Analyst Teams
thru Gap Analysis, Requirements Definition, and Problem Resolution & Implementation Planning.
Work with teams to identify and develop business models for future sales growth.
Identify and document in MS Visio the complete end to end present & future state process flows.
Identify and document retail opportunities across all banners, such as ad flyers, forward buying discounts, shrink reduction (waste), cost & deals, increase margins and promotions.
Environmental Health & Safety Engineer: 2003 to 2008
Fairchild Semiconductor 333 Western Ave. So. Portland Me. 04106
Implemented detailed programs, such as LOTO (lock out tag out) stored energy, laser tracking
and documentation, satisfying all OSHA and State regulations.
Utilizing Skill Soft e-learning software program for technician training and annual certification.
Certified as the LSO (laser safety officer).
Ergonomic tool designs and semiconductor fabrication tool modifications see patent 6,041,817.
SESHA (Semiconductor Environmental Safety & Health Assoc.) member. Presented White Paper at SESHA Conference in San Jose Ca. in 2007. Paper is published on SESHA International e-journal.
R. Guertin page 3
Staff Equipment / QA Engineer: 1998 to 2003
Fairchild Semiconductor 333 Western Ave. So. Portland Me. 04106
As a QA Engineer my responsibilities consisted of product quality inspections and quantifying in-line die visual inspections, data collection, data analysis, data presentations and justifying / implementing permanent solutions based on root cause analysis.
As a Staff Engineer I was responsible for Semiconductor tool purchases, installations, qualifications and software / hardware build specifications. Additional responsibilities consisted of facility requirement specifications, manufacturing and qualification schedules, equipment signoffs, vendor communications, etc.
Section Head / Manager 1995 to 1998
National Semiconductor 333 Western Ave. So. Portland Me. 04106
Section Head Manager with full responsibilities for strategic planning, staffing, budgeting and technical performance for the constraint manufacturing area during a major production ramp. Managed and directed
a team of four supervisors, one hundred manufacturing operators, fifteen technicians and process engineers.
Justified and implemented a 3 million facilities and equipment upgrade.
Coordinate production planning and scheduling, purchasing, and subcontracting.
Senior Equipment Engineer: 1988 to 1995
National Semiconductor 333 Western Ave. So. Portland Me. 04106
Responsibilities consisted of Semiconductor tool and facilities specification and installation, KT Analysis, FMEAs, technician training, tool performance (uptime) and tool acceptance signoff. Utilize OEE & FMEA to determine throughput, tool availability, maintenance spare part inventory requirements. Preventative Maintenance Specs. writing to maximize tool utilization and throughput. Verify tool meets or exceeds build specifications and OEM (Original Equipment Manufacturer) specifications.
Worked closely with Management, Manufacturing, Purchasing and Engineering departments on vendor contracts, price negotiations & build specifications and product scheduling, installation & evaluation.
Equipment Engineer: 1978 to 1988
Fairchild Semiconductor 333 Western Ave. So. Portland Me. 04106
Responsibilities consisted of Fab Semiconductor tool installations, trouble shooting, tracking MTBF (mean time between failures), spare parts purchases, toxic gas and particle monitoring requirements, MSDS (material safety data sheet) documentation, and tool qual plan and timeline.
Years of experience presenting cost of ownership reduction data and generating ROI projects.
I’ve been involved with numerous team projects such as the Stores Maintenance Inventory Team.
The Mission Statement was to improve manufacturing tool uptime, reduce cost, and relocate spare parts to point of use. I was elected by the team as the Team Leader. I used my technical, business, and computer skills to challenge, mentor, and motivate the team members to utilize Microsoft tools such as Excel, Project, Power Point programs. The team worked closely with Fairchild’s Purchasing, Process & Maintenance Engineering Departments and reduced the number of external vendors from 800 to 600, as well as negotiates best pricing. Average cost saving per item was 20%.
Implemented inventory control software and barcode readers, which reduced labor requirements for additional cost savings. Investment of $250K, project completion was approx. 1 years, and ROI was > $1.5 million.
Inventor of US Patent 6,041,817, International Classification GO5D 1600 for Fairchild Semiconductor.
Represented Fairchild EHS Department at the SESHA Conference in San Jose Ca. in 2007.
White paper published in SESHA international e-journal in April 2009. R. Guertin page 4
Hobbies: Skiing, hiking, travel, photography, wood working, building houses, biking.
Education:
Southern Maine Technical College Electronic / Electrical Technology
University of Southern Maine Business
Additional Training: Approx. 1000 hours of formal tech. training provided by numerous U.S. OEM vendors.
Employment History
Inn By The Sea
Start date: 7/2023 to 5/2024
Bower Rd.
Cape Elizabeth Maine
Job Title: Maintenance Technician
Confluent Medical Technologies
Start date: 10/1/21 to 5/23
Job Title: Maintenance / Facilities / EHS Manager
Windham Me. 04106
Maine Container (Division of Plastic Industries Inc.)
Start date: 10/21/13 to 9/30/21
Job Title: Quality Manager
Poland Me. 04274
Flotation Technologies
Start date: 8/20/12 to 10/18/13
Job Title: Quality Manager
City: Biddeford Me. 04005
Adecco / Hannaford / Delhaize America
Start date: 7/14/2008 End date: 7/6/2012
Job Title: Business Process Engineer
City: Scarborough, Me. 04074
Employer: Fairchild / National Semiconductor
Start date: 4/18/78 End date: June 1, 2008
Job Title: Staff Semiconductor Equipment Engineer
City: So. Portland, Me. 04106
US Citizen, white male, with current passport
Valid drivers’ license with no moving violations or accidents
Employment availability: May 2024
References:
John Gervais Steve Goodwin
NAFC Project Manager EHS Manager
Amazon 207-***-****
John Thomas Kevin Nason
President Ops Manager
*******@*************.*** Idexx Labs
Contact this candidate