AL-SUWAIDI INDUSTRIAL SERVICES CO. LTD.
STANDARD RÉSUMÉ FORMAT (For Key Staff)
Name
:
ROLANDO M. BARROS
Employee No.:
FJ10745
Position
:
SR. MECHANICAL ENGINEER
Nationality
:
FILIPINO
Date of Birth
:
13th September 1967
Marital Status
:
Married
Languages
:
English & Tagalog
Address
:
145 R. Fernandez Street, San Juan City, 1500 NCR
Educational Qualifications:
Degree / Diploma
School / Country
Period (From – To)
Bachelor of Science in Mechanical Engineering
Pamantasan ng Lungsod ng Maynila
1984-1990
Training & Seminars Attended
MS Project 2010, Madagascar
CMMS/EAM, Madagascar
PTW System, Madagascar
Ambatovy Plant Induction Training (H2S, H2, Air Separation Units, Ammonia, LPG & Naphtha Storage & Facilities, Lime & Limestone Plant), Madagascar
Challenge of Leadership
Communication Enhancement
Inter-Personal Communication Skills Training
Roller Bearing – Theory and Practice
Seminar on Psychrometric and Air Conditioning
Seminar on Iwaki Chemical Pump
Problem Solving – Manufacturing Approach
Basic Lubrication and Compressed Air System
TPM / Cyanide Handling and Safety
Occupational Health and Safety Training
Seminar on Fluid System
Computer Skill:
Working Knowledge of MS Office
MS Project 2010
CMMS
EAM
Oracle
SAP
Skills:
Supervision & Maintained Quality.
Ensure Specs Accuracy as per Isometric Drawing.
Good Decision Making.
Plant Engineering & Management
Cordial Coordination with the Client, Consultant & Contractors.
Experienced in Plant Commissioning.
Material Requisition/Work Order
Planning and Troubleshooting
Preventive/Predictive Maintenance
Maintenance and Repair Management
Pumps/Conveyors/Blowers/Chillers/Gearbox
Mining and Mineral Process/Beneficiation
Alignment (Optical Alignment/Conventional)
Adaptability and Flexibility/Poised under pressure.
Summary of Professional Experience:
Summary of Work Experience (From present to previous)
Name of Company /
Country
:
M.S.AL-SUWAIDI INDUSTRIAL SERVICES COMPANY PVT. LTD. KSA.
Project
:
Maaden WSPC, Turaif, Northern Border, KSA
Position Held
:
SENIOR MECHANICAL ENGINEER
Period (From – To)
:
January 2022 – December 2023
Key Job Responsibilities
:
Inspected and tested damaged machine parts and marked defective areas and advised supervisors of repair needs.
Inspected periodically all equipment’s of Beneficiation Plant (Upstream/Wet) to include flotation, Sizing Area, Rod Mills, Tailing Horizontal Belt Filter and Concentrate Horizontal Belt Filter, Blowers, pumps, Thickener, progressive cavity pumps and Vacuum Blowers to determine problems and necessary maintenance.
Prepared weekly maintenance schedules and work allocation.
Participated in the weekly schedule coordination meeting and presented the weekly schedule of workable maintenance in the backlog. Ensured that a clear understanding exists of which job will be worked in the upcoming week and finalized the weekly schedule for operations approval.
Reviewed safety practices of mechanical personnel and ensured that all are following company safety guidelines.
Prepared equipment specific documentation such as special assemble instructions, past modification, data sheets, calibration requirements, manufacturer design information and purchase necessary parts, equipment, services, and documentation necessary to perform maintenance work.
SIS Join Date
:
28th MARCH 2018
Name of Company /
Country
:
M.S.AL-SUWAIDI INDUSTRIAL SERVICES COMPANY PVT. LTD. KSA.
Project
:
Maaden Phosphate Company, Ras Al Khair, KSA
Position Held
:
MECHANICAL SUPERVISOR
Period (From – To)
:
APRIL 2019 – DECEMBER 2021
Key Job Responsibilities
:
Prepared estimates of work hours, materials, and resources required for maintenance projects.
Identified equipment failure root causes and initiated corrective actions.
Monitored the performance of maintenance staff and personnel to ensure compliance with company standards.
Involved and helped improve the MTBF/MTTR department goals and benchmark.
Monitored inventory and ordered new supplies to meet demands for repairs.
Created WR and closed completed WO in the Oracle system to reduced backlog of the system generated PMs to maintain KPI within the benchmark.
Inspected, tested, measured completed work, using devices such as hand tools, precision measuring tools and gauge to verify conformance to standards and repair requirements.
Created detailed documentation of all maintenance activities.
Suggested changes in working conditions and use of equipment to increase efficiency of department.
Name of Company /
Country
:
M.S.AL-SUWAIDI INDUSTRIAL SERVICES COMPANY PVT. LTD. KSA.
Project
:
Petrorabigh Refining Company
Position Held
:
ROTATING EQUIPMENT SUPERVISOR (POLYMER PHASE 2)
Period (From – To)
:
MARCH 2018 – MARCH 2019
Key Job Responsibilities
:
Provided technical support to rotating equipment engineering and maintenance matters for Polymer Areas (EPR, TPO, LDPE, PMMA & Nylon).
Served as the primary rotating equipment engineering resource for an assigned area PMMA, TPO, EPR, LDPE, NYLON 6.
Provided daily/weekly/monthly reports and update of maintenance activities.
Ensured all deliverables related to rotating equipment are in accordance with the project needs, prescribed specifications and good engineering practice are completed within schedule.
Field support and commissioning assistance.
Aligned machines and equipment using hoist, jacks, dial gauge, alignment kit and optical alignment equipment.
Replaced defective parts of machine, adjusted clearance, and alignment of moving parts.
Provided technical assistance/troubleshooting assistance in resolving rotating equipment design, operation, and maintenance problems; contacted vendor/supplier representative as required.
Scheduled and supervised the work of rotating equipment technicians and millwright.
Prepared technical tabulation and evaluation for any type of rotating equipment submitted by Vendors.
Analyzed rotating machinery equipment history data in terms of failure analysis and spare parts consumptions and inject the experience to selection of equipment during project execution.
Name of Company /
Country
:
SAUDI DOLOMITE CO., LTD., AINDAR, KSA
Project
:
MINING
Position Held
:
MECHANICAL ENGINEER
Period (From – To)
:
JUNE 2015 – JUNE 2017
Key Job Responsibilities
:
Planning, scheduling, execution, preservation, and commissioning of rotating and static equipments. MRP, ERP. Co-ordination with client for project activities, status and progress.
Originated and developed analysis to rapidly repair equipment by studying Operating Equipment Manual (OEM) repair, maintenance, and procedures.
Performed regular maintenance checks to identify and address potential issues of Plant Assets such as Hydration Plant, Vertical Shaft Kiln, Crushers /Sizing Screens, Blowers, Conveyors, Dust Collector, Gearbox (Variable and Servo Drives). This includes engineering, planning/scheduling, documentation, and reporting.
Reviewed all equipment spare parts requirement. Procured according to criticality and budget.
Identified tools and methodologies for preventive and predictive maintenance downtime.
Acquired failure data to prepare maintenance plans for restoring equipment to operating condition.
Implemented continuous improvements to reduce downtime and increase productivity.
Investigated equipment failures and difficulties to diagnosed faulty operation and recommend remedial actions.
Established and coordinated maintenance and safety procedures, service schedule and supply of materials required to maintain machines and equipment in prescribed condition.
Conferred with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
Name of Company /
Country
:
EEI CORPORATION
Project
:
Combine Cycle Power Plant, Sta Rita, Batangas, Philippines
Position Held
:
MECHANICAL ENGINEER
Period (From – To)
:
JUNE 2014 – JUNE 2015
Key Job Responsibilities
:
Supervised erection works of Rotating/ Static Equipment, do method statement in installation/erection procedure of mechanical equipment.
Equipment installation: withdrawal of equipment and accessories marked the center lines on equipment and cleaning; erection and levelling/centerline; initial alignment; preparation for “pocket grouting”; Request for RFI for initial coupling alignment prior to grouting.
Planning, material handling, indoor/outdoor safekeeping of mechanical equipment.
Prepared foundation for equipment installation / Erection.
Reviewed and processed MEPF shop drawings and other submittals.
Oversaw installation, operations, maintenance, and repair ensured that machines and equipment are installed and functioning according to specification.
Directed installation, operation, maintenance, or repair of rotating /static equipment such as pumps, blowers, condenser, heat exchangers, steam/gas turbine and other auxiliary equipment of combine cycle power plant.
Maintained quality control program requirements and special process/test techniques required. Technical coordination with Sub-Contractor, Vendor, Client Owner (Siemens).
Name of Company /
Country
:
AMBATOVY Ni-Co PROJECT, MADAGASCAR, SA
Project
:
Mining & Mineral Processing
Position Held
:
MAINTENANCE COORDINATOR/PLANNER
Period (From – To)
:
APRIL 2011 – MAY 2014
Key Job Responsibilities
:
Involved and participated in POVT and commissioning of Ancillary Plants in Utilities Area (H2S, H2, Lime & Limestone & Naphtha storage & facilities) and Ammonia Plant, HAZOP and QRA analysis before shutdown and maintenance.
Assigned as commissioning coordinator for Lime & Limestone Plant, H2S Plant, Stockpile (Sulphur/Coal/Limestone) and Ammonia Plant. To monitor and follow-up to construction and vendor punch list items.
Effectively handled the planning and coordination function between all disciplines for the Ancillary Plants. The equipment related to these areas are H2S, Lime & Limestone Plant, Ammonia, LPG/Naphtha, H2 & Air Separation Plant, Steam Network, Stockpile (Sulphur, Coal Limestone).
Effectively handled the planning and coordination function between all disciplines for the HPAL (High Pressure Acid Leach) Plant. The equipment related to these areas are Autoclaves, Thickeners, HP Geho pumps, Centrifugal Pumps, Pressure Vessels, Agitators, HP/LP Direct Heaters, Venturi Scrubber, H2 Compressors, Ball Mills, Conveyors, Cyclones, Fans & Blowers.
Coordinated operation and maintenance activities to maximize work force productivity to avoid potential delays and obstacles to efficient work execution of commissioning activities.
Directed and supported installation teams during POVT and commissioning.
Scheduled and updated all planned pre-commissioning and commissioning operations and maintenance activities both daily and one (1) week look ahead schedule.
Managed work priority; developed job plans; defined parts; materials & skills; engaged the proper resources to develop a safe and efficient work control plan.
Participated in the Weekly/Schedule coordination meeting and presents the weekly schedule of workable maintenance jobs from the backlog. Ensured that a clear understanding exists of which job will be worked in the upcoming week. Finalized the weekly schedule for Operations approval.
Name of Company /
Country
:
JX NIPPON MINING & METALS, PHILIPPINES
Project
:
Copper Foil (EDCF/TRCF) Processing and Manufacturing
Position Held
:
MAINTENANCE SUPERVISOR (ENGINEERING DEPARTMENT)
Period (From – To)
:
JANUARY 1998 – APRIL 2011
Key Job Responsibilities
:
Developed and implemented mechanical maintenance plans to prevent costly equipment breakdowns.
Developed preventive maintenance procedures for mechanical systems.
Assigned duties and responsibilities to project personnel.
Planned, scheduled, and coordinated project activities to meet deadlines.
Conducted failure analysis, documented results, and recommended corrective actions.
Condition Monitoring and maintained parameters of all facilities equipment (Chillers, AHU, Compressors, Scrubber & Blowers; Cyclo-Blowers and Pumps): Hitachi DSP 75 & SDS 200 Screw Compressor (10m3/min &33m3/min), Cooper Turbo 2000 Compressor (150 HP),680 CFM, Atlas Copco ZE-75 (75 kw,23m3/min), Chillers (210 TOR), Liang-Chi Cooling Towers (400 TOR)
Performed routine/shutdown maintenance of EDCF (Electro-Deposited Copper Foil) and TRCF (Treated Roll Copper Foil) equipment.
Disassemble/Assemble, repair and installation of pumps (STX/MTX Gould pump, Gould Magnetic pump, multi-stage, Iwaki Chemical Pump, Pit pump) and alignment.
Prepared PM and lubrication schedule for pumps, gearbox, Chrome plater and Drum Polisher/TL and Slitter Machines.
Prepared and administered preventive maintenance work orders, 5’S and TPM.
Employed wide variety of hand and power tools including Drills/Grinders, Torque Wrench, precision measuring instruments, other measuring tools such as Infrared Thermometer, Tachometer, Surface Roughness Tester, and Durometer.
Name of Company /
Country
:
SALEM OCEANIC CORPORATION, PHILIPPINES
Project
:
MANUFACTURING
Position Held
:
PROCESS ENGINEER (MECHANICAL)
Period (From – To)
:
JANUARY 1997 – JANUARY 1998
Key Job Responsibilities
:
Conducted project study; machine performance evaluation; modification and process improvements/changes to maximize the product yield.
Introduced new adhesive equipment that contributed to product strength, reduced assembly time and man-hours.
Prepared estimates/lay-out of projects requested by concerned department under Planned Work Order (PWO).
Evaluated the results/findings on the cause of deviation from the standard work procedure and work instruction.
Determined the best process for each job so that specific requirements are set forth for which equipment, tools and jigs can be selected and designed.
Coordinated and implemented quality control objectives, activities, or procedures to resolve production problems, maximize product reliability or minimize costs.
Planned and established sequence of operations to fabricate and assemble parts or products and to promote efficient utilization.
Recommended methods for improving utilization of personnel, materials, and utilities.
Created and issued Work Orders to Maintenance Department using SAP EAM software.
Organized work materials, write work instructions, specify safety needs, and optimize the use of maintenance labor to maximize the performance and minimize the downtime of all equipment.
Prepared equipment specific documentation such as special assemble instructions, past modifications, data sheets, calibration requirements, manufacturer’s design info. Purchase necessary parts, equipment, services, and documentation necessary to perform maintenance work.
Plan, organize, monitor, and analyze maintenance operations to provide safe, economical, and effective use of labor, materials, and equipment.
Strengths:
Communication skills.
Good decision making.
Good knowledge of all the aspects of Mechanical Maintenance.
Knowledgeable in mechanical equipment.
Troubleshooting. Preventive Maintenance
Maintenance and Repair Management
Pumps/Conveyors/Blowers/Chillers/Gearbox
Mining and Mineral Process/Beneficiation
Alignment (Optical Alignment/Conventional)
Adaptability and Flexibility/Poised under pressure.
Material Requisition/Work Order
Supervision and Leadership
Passport Details :
PASSPORT NO
ISSUED AT
DATE ISSUED
EXPIRY DATE
P2138758b
MANILA, PHILIPPINES
10 MAY 2019
09 MAY 2029
Brief Summary :
TOTAL YEARS EXPERIENCED IN INTERNATIONAL ABROAD
COMPANY
TRADE
COUNTRY
9 YEARS
AMBATOVY & AL SUWAIDI
SENIOR MECHL. ENGINEER
SAUDI ARABIA
TOTAL YEARS EXPERIENCED IN LOCAL
COMPANY
TRADE
COUNTRY
18 YEARS
VARIOUS MANUFACTURING PLANT & EPC
MECHANICAL ENGINEER
PHILIPPINES
TOTAL WORKING EXPERIENCE ( OVER ALL) -
Note: add more pages if required