Mechanical Engineer Heavy Duty
Resume:
CURRICULUM VITAE EMMANUEL MENSAH
PERSONAL DATA
NAME : Emmanuel Mensah
Postal Address : P. O. Box MC 754 Takoradi W/R
Telephone Number : +233*********/555592788
E-mail Address : ***********@*****.***
Profession : Heavy Duty Mechanic/Support Equipment
Driving License : Class “CE”
PROFESSIONAL SUMMARY
Skilled mechanical Engineer with nineteen (19) years of experience in Automobile Engineering. A resourceful Mechanical Engineer with the ability to supervise execution activities, lead Mechanical functions and carry out the accurate review of engineering submittals.
Demonstrates profound knowledge of troubleshooting, installation, overhauling and is experienced in tracking the progress of Mechanical functions and the implementation of recovery plans to achieve target.
A recognised leader with the ability to provide adapt supervision to site inspections to ensure the accurate completions of site inspections pertaining to Mechanical works.
My career objective is to build an excellent corporate personality that would enable me work in any professional corporate environment.
To use my skills as heavy duty mechanic/support equipment to the benefit of employer, achieving and exceeding the target and goals of the company.
EDUCATION BACKGROUND
INSTITUTION CERTIFICATE
Sunyani Technical University Bachelor of Technology in Mechanical Engineering (Auto) - 2020-2022
(Second Class Upper Division)
Sunyani Technical University H.N. D Mechanical Engineering (Auto)
(Second Class Upper Division) - 2017-2020
Kumasi Technical Institute Naptex (Heavy Duty & Diesel Mechanic)-2008-2012
SKILS
-Valid driving license and clean record - Forklift Operator
-Scheduled and preventive maintenance - Haib Crane Operator
-Delight and hard working - Tele-handler Operator
-Engine repair - Refrigerant handling
-Electrical system familiarity - Light and Heavy-duty vehicle repair
-Use SAP Software to raise notification for defective parts change out and work order closings
-Safety conscious
EXPERIENCE
Automobile Mechanic / Leading Hand
Newmont Ghana Gold Limited-Ahafo South (14th October, 2008 to date)
-Service drills and shovels (Liebherr R9400 Excavator, Terex O&K RH170 Excavator, Drill Tech, Sandvik DR 560 - Change worn out parts
-Removed cylinders, pumps, motors, coolers, engines, DCV, etc.
-Remove and overhaul braking systems
-Perform daily service/inspection on the equipment & Preventive Maintenance
-Carry out preventive maintenance - Safety conscious
-Writing of end of shift report
Heavy Duty Mechanic/Support Equipment
Liebherr-France S. A. S (Ghana), 2007-2008
-Service Liebherr R9400 excavators - Write end of shift report
-Service Light and Heavy-Duty vehicle - Service Forklift and Haib crane
-Service welding machine - Safety conscious
-Direct work of junior mechanic to ensure accuracy
-Carry out preventive maintenance
Heavy Duty Mechanic/Support Equipment
Unicontrol Commodity (Ghana), 2001-2004
-Service loaders, forklift, conveyors - Engine repair
-Service Light and Heavy-Duty Vehicles - Safety conscious
-Write up repair orders and provide time and cost estimates
-Write end of shit report
ADDITIONAL PROFESSIONAL TRAINING
•Certified Maintenance and Reliability Professional – SMRPCO Organization – 23rd Sept. 2019 CMRP ID: 243536
•Introduction to Supervision Training – Newmont Ghana Gold Limited – 2016
COURSE CONTENT
•Legal and regulatory requirements, overview of HR related people knowledge, safety role and responsibility, social responsibility and Environment requirements
•Inspectorate Division of Minerals Commission - 1st February, 2016
COURSE CONTENT
•Appointment as Inspecting Engineer, Newmont Ghana Gold Limited (Ahafo Mine Operations) in Teams of Regulation 53 of the Minerals and Mining (Health, Safety and Technical) Regulations 2012 (L.I.2182) Job Title. Inspecting Engineer Certificate No. 393
•In the safe use of Forklift Truck and is permitted as prescribed in the Minerals & Mining (Health, Safety & Technical) Regulations.
•FAS failure analysis – Newmont Ghana Limited – July16, 2012
COURSE CONTENT
•Equipment failure analysis
•Lincoln Fabrication SA – 20 July, 2012
COURSE CONTENT
•Fundamentals of centralized lubrication systems including tribology, progressive systems, multiline systems, dual line systems and basic of drum pumps.
•White Belt Training – Newmont Ghana Gold Ltd. – November, 2011
COURSE CONTENT
•Business Excellence
•The Capital Group “The power of partnership” – 6th – 7th July, 2011
COURSE CONTENT
•Enhancing Mine productivity through effective equipment management & maintenance strategies.
•Driver Safety – Newmont Ghana Gold Ltd. – June, 2011
COURSE CONTENT
•Impaired Driving, Defensive Driving, Safety Practices, Managing Hazards, Risk Factors.
•Terex O & K RH170 – Newmont Ghana Gold Ltd. – November, 2010
COURSE CONTENT
•Basic Overview of the Terex O & K RH170 face shovel – Walk-a-Round PM.
Inspections-PM Service maintenance procedures at – 250hr 1000hr 2000hr service intervals
•The Terex O & K RH170 Hydraulic Pump & Actuator Groups Including: The Servo system, travel system, swing system, working equipment, hydraulic cooling system, engine colling system and the central greasing system.
•Caterpillar ‘C’ Series Engine Maintenance Training Programme-Newmont Ghana Gold Ltd. 19th April – 7th May, 2010
COURSE CONTENT
•C – Series Engine – family identification ACERT/Non ACERT & specifications.
•C – Series Engine – Layout / configuration
•C – Series Engine – Internal components – Construction & Design
•C – Series Engine – Air induction system / exhaust & Scavenging system
•C – Series Engine – Fuel filtration & fuel injection system
•C – Series Engine – Lubrication system
•C – Series Engine – Crankcase & Ventilation system
•C – Series Engine – Auxiliary cooling system
•C – Series Engine – ECM management group
•C – Series Engine – Systems adjusting & re-calibration
•C – Series Engine – Diagnostic & Trouble shooting
•Sandvik 1500 Rock Drill Maintenance Training Programme – Newmont Ghana Gold Ltd. 29th March-16th April 2020
COURSE CONTENTS
•Basic Overview of the SANDVIK 1500 ROCK DRILL
•Walk-a-Round PM inspection
•PM Service maintenance procedures at – 250hr, 500hr, 1000hr
•The CAT C-18 Engine & Pump Drive Group
•The Hydraulic Pump Group Operation – Testing and Adjusting
•SANDVIK 1500 hydraulic systems operation – Testing and Adjusting
•The compressor and air end system operation – Testing and Adjusting
•The radiator cooler group operation - Testing and Adjusting
•Full on Board Electrical systems operation – Testing and Adjusting
•The Undercarriage – Jacking & Stabilization
•Full SANDVIK 1500 equipment systems diagnostic procedure
•Liebherr Machines- Newmont Ghana Gold Ltd. – June, 2009 – November 2009
COURSE CONTENT
•Basic overview of the LIEBHERR 994B/9400 face shovel
Inspections-PM Service maintenance procedures at – 250hr 500hr 1000hr 2000hr service intervals
•The QSK-45 Cummins Engine. (The QSK45/60 virtual college training package0
•The Liebherr/Rexroth Hydraulic pump & actuator groups: P1, P2, P3, P4, PS- 1& PS-2, P8-P9-P10, 1 P10,1 P10,2, & P12; Full system operation.
•Liebherr hydraulic control valves & systems
•Liebherr electro servo control systems
•Liebherr electronic management system
•Diagnostic – testing & adjusting
•Intermediate Hydraulics – Newmont Ghana Gold Ltd. – August, 2009
COURSE CONTENT
•Hydraulics maintenance
•Auto Electrical Fundamentals – Newmont Ghana Gold Ltd. 2008
•Shell Lubricants Training Course Module II – 2008
COURSE CONTENT
•Oil Condition Monitoring
•Hydraulics
•Kwame Asamoah Automobile Engineering Shop – Tanokrom, Takoradi – July, 1995- May, 1999
COURSE CONTENT
•Engines: Principles & Construction of Internal Combustion Engines
•Diesel Fuel System
•Electrical and Carburation System
•Power Control Units
•Hydraulics
•Welding
•Routine Maintenance
•Workshop Practice & Shop Safety
•Operating of Heavy Equipment
•Drive Line
REFEREES
Mr. Michael Sarfo Adjei Mr.Peter Bring
Maintenance Superintendent Former Liebherr Project Manager
Newmont Ghana Gold Limited Tarkwa Goldfields
Akyem Plant Site
Mr.Dale Clayton
Former Liebherr Project Manager
Newmont Ghana ( Expatriate)
Mr.Paul Newman
Former Expatriate
Newmont Ghana
Contact this candidate