WESLEY MAX ROBINSON JR.

Cover Letter *-**-**** With Curren Resume attached

**** ******* **** ** * Conyers, Georgia 30013 * Cell: 678-***-**** * Email: ad4tzw@r.postjobfree.com Career Objective: Commercial and/or Residential Construction position, either office or field or combination.

Seeking a responsible and challenging position with a progressive organization where years of practical experience, creative skills, and managerial expertise will be of profound benefit in achieving an organization's goals and provide personal career enhancement.

CORE SKILLS In Commercial and General Construction

*Field superintendent in all phases of a project from site to final punch out.

*Maintain effective crew production and subcontractor schedules.

*Maintain quality and safety of field or office workers.

*Estimating using manual or computer software.

*Communication Skills.

*Quality inspections and safety inspections.

*Trouble shooting in field to resolve issues.

*Field Project management.

*Commercial Estimator at Senior and Chief estimator level.

*Management of support staff in estimating and Project manager support.

*Computer drafting, board drafting and design, and Microsoft Office software.

*Additional skills: welding, field fabrication, door installations for walk in doors, overhead doors and operators, concrete finish, site layout, erection of metal buildings, carpentry, drywall, paint, install accessories in restrooms, tile, wood frame buildings.

Additional roles held: Manufacturing Manager multistage robotics assembly; Field Engineer and Project Manager duties. over 200. Experience in all phases of construction and manufacturing. Additional experience in aerospace major jig and fixture tool design, and design checking. Positions held in this field: Designer, Checker, Supervisor, and Branch Manager. Aerospace Manager in Tool Design supervise 225 people in Tooling and fixture design and support and document printing and control.

PROJECT Types Hotels ground up 60 to 120 room wood frame including pool and drive thru. Apartment complexes 16 to 28 buildings with 2 and 3 bedroom and bath per and two to four story. All included full site development with up to 28 acres. Office buildings up to four stories structural steel and block and brick. Site development all phases. Upgrades and extensive remodel of grocery stores, fast food, office complex, strip center rebranding. Retail and office new using wood or steel and block and or brick exteriors, metal stud and wood framing, all MEP and site. Construction using pre-engineered buildings and structural steel with concrete and or block. Stucco exteriors and storefronts. Site development including utilities, road work, repair and modifications and new. Subdivision site work and road install. Concrete and asphalt paving. Commercial, residential and manufacturing structures. Residential remodel and service tech activity on windows and doors and other improvements. Petroleum processing terminals. Airport structures work centers and hangers. LEADERSHIP AND TRAINING

Major Qualifications: Over 40+ years’ experience in the areas of commercial construction. Experience includes Safety Manager and management in manufacturing, quality control, and design. Experience with cad-cam systems, production control, vendor selection and follow-up, and construction, design experience in commercial building structures, commercial and industrial design, and estimating experience with auto-cad. Sub contract administration and follow up for safety and quality.

Estimating software: MC2 (for general contractor), Earthworks for site work, Quick Measure take off software; Microsoft Project for schedules; Microsoft Word and Excel spreadsheets. Project control and scheduling for all phases of work in construction or manufacturing. Over 45+ years of supervision of employees with hands on control in all types of working conditions from office to field. Training and certification of construction supervision and laborers in the areas of OSHA 30 and OSHA 10 hour first aid, training of onsite safety officers to meet daily safety requirements. Instruction and certification for construction forklifts in both standard off road and “extend a boom” heavy lift units. Refresher courses in safety and first aid training for construction personnel. Teaching and maintaining training records. Education:

College courses directed at mechanical engineering degree with design option and management. Training in quality control engineering and statistical process control, AutoCAD, computers (IBM format and Windows), economics, and program management, safety and OSHA training. Courses in personnel management and total quality management style and world- class manufacturing. College training from Kansas State University, Manhattan, KS and Wichita State University, Wichita, KS. Training in MC2 estimating software, Earthworks software, Auto Cad, Microsoft Office, Timberline estimating (Sage), Plan Swift on screen take off, Blue Beam, Builders Connect, and board drafting. Equipment Qualified On:

Office: Office equipment, AutoCAD and computer estimating, MC2 and Microsoft products, Word, Excel, projects experience as internal network maintenance and setup. General tech support on computer system, refer to above for additional software.

Construction Field Work: Rubber tired loaders, backhoes, Cat track loaders, Cat skid-steers, forklifts including extended boom and full all terrain, truck mounted hydraulic cranes, concrete finishing equipment, line levels and laser survey equipment. All types of hand tools for the construction trades, including welding. OSHA training and certification as instructor.

Professional Experience:

Construction field experience: 40+ years of hands on field experience. Positions held: Superintendent, Foreman, General Superintendent in the following fields: general construction, pre-engineered building erection, structural steel erection, concrete, site work, interior finishing. Bulk storage, utility construction for projects. Maintenance of construction equipment. Chief Estimator or Senior Estimator in Construction: 25+ years Metro Atlanta Area, project range up to 25 million. Projects in retail, office, health care, hotel, hospital, multi-family, apartment complex, schools both in hard bid and design build. Produced preconstruction cad drawings for design build proposals and concept cost estimates. Produced preliminary site layouts using Earthworks and AutoCAD for best usage of proposed site. Review of Architect drawings and mechanical drawing and final site for complete design and meeting customer requirements in design build. Process also used on hard bid projects. Quality Manger: 5+ for General Contractor to ensure project met or exceeded standard construction practices and customer requirements. This included documents, field inspections, and creation of quality manuals and procedures. Safety Manager: 10+ years for General Contractors, oversee all field safety and training requirements for company employees and sub-contractors to meet OSHA and state requirements. Developed safety programs and manuals for company use. Conducted training classes to meet requirements.

Project management of certain projects and general support of project management team with office and field support staff. Safety Inspector: for methanol terminal in LA on contract basis. Quality Supervisor Manufacturing: 2+ for metal fabrication and handicap mobility units, ramps, wheelchair locks, transit bus foldout stairs to ramp and fire trucks, school buses, limos, hearse, fire trucks and ambulance units. Prototype class one ambulance unit. Safety courses taken: OSHA 30 combined with 10-hour OSHA first aid Forklift instructor certification

Scaffold inspection and installation certification Site certification for underground trenching and erosion control measures Refresher courses in all areas.

Certifications are currently not in effect, refresher courses would be required and willing to take same Maintenance Supervision: 10+ years facility covering over 100 acres and 30 + structures including all new site, underground, and building construction, all landscaping requirements. Retail Experience: Floor sales in hardware store covering plumbing, hardware, yard equipment and landscaping supplies, certified for propane sales and forklift operations. Restocking of products. Additional areas of experience: 10+ years of aerospace and aircraft tool design engineer. Held positions as Senior Designer of Major Jigs and Fixtures (final assembly of aircraft), up to Branch Manager over 225 people on major commercial and military programs and support staff. Design of special multi task production machines for hydraulic pump and motor manufacturing facility. Law enforcement: Sheriff Sergeant with Sedgwick County (outside of Wichita, KS). Additional skills: Concrete forming, place and finish. Site layout and staking. Interior finish, carpenter skills. Underground utilities and general construction requirements.

Additional information provided on request.

Thank you for your time to review my qualifications regarding your organization. Sincerely,

Wesley M. Robinson Jr. Updated 1-30-2024

Personal Note regarding break in work History. Due to accident and medical issues with My Wife. I took time off from the employment scene. Her condition was critical due to blood clots and other potential conditions that could have caused either very long term disabilities or death. We have been able and lucky to overcome these and now it is time to return to work. Thank all who review and consider my work for a position with your firm. See Resume attached for full information and job history Resume updated 1-30-2024 and combined with cover letter Wesley Max Robinson Jr.

2649 Dennard Road NE

Conyers, Georgia 30013

Cell 678-***-**** email ad4tzw@r.postjobfree.com Please leave a message and contact info Positions seeking at this time Qualified for with experience and training Construction Estimator senior or lead

Construction Commercial superintendent

Project Manager Senior or Jr.

Quality inspector or manager

Safety inspector or manager

Maintenance Supervisor or Lead

Open for discussion on other positions a company may be seeking that I have experience in Note last page of resume is a brief summary of types of project and duties toward each Information for contact

Leave message if no answer, calls will be answered ASAP. Please note a call with no message will not be returned as it provides no information Availability within four days of acceptable offer or as required by company Text Messages to 678-***-**** or email to ad4tzw@r.postjobfree.com Email: ad4tzw@r.postjobfree.com

Career Objective:

Seeking a responsible and challenging position with a growth oriented organization where years of practical experience, creative skills, and managerial expertise will be of profound benefit in achieving an organization's goals and provide career enhancement. In fields of Supervision various fields of maintenance, and Commercial Construction fields: Estimator, Project Manager, General Superintendent, Field Quality Inspection, Manufacturing and Office positions. Long term employment of 10 to 15 years or more Major Qualifications:

Numerous years of experience in the areas of commercial construction, serving as Senior /Chief estimator, Safety manager, quality manager and training. Design and prepare drawings for commercial construction and design build estimating and review of plans and interface with Clients. Estimating experience hard bid, design build, heavy sub bid, combination of sub bid/company crews, negotiated projects and full site projects using computer take off and manual take off, with development of special spreadsheets for estimates. Experience also in Tool design of fixtures and major assembly jigs, master tooling. Design experience in machine tool design and product design. Experience includes management in tool design, manufacturing, quality control, design checking both on board and cad cam. Experience with cad-cam systems, production control, vendor selection and follow-up, and construction, design experience in commercial building structures, commercial and industrial design and estimating experience with auto-cad. Aerospace, hydraulic components, automated assembly machine tools, interface with vendors and sub- contractors in all positions held, experience with contract letting and estimating on project. Project control and scheduling for all phases of work, in construction or manufacturing, years of supervision of employees and hands on control in all types of work and conditions from office to field. Establish safety manual for general contractor in construction and site work, and for commercial gun range for standard and emergency situations duties to maintenance and grounds keeping.

Education:

High school courses directed at engineering and business. College training three years total from Kansas state university, Manhattan, Kansas and Wichita state university, Wichita KS. in Manufacturing Engineering with design option

Equipment Qualified On:

Construction: Rubber tired loaders, track front end loaders, backhoes, and skid-steers, forklifts, truck mounted hydraulic cranes, dump trucks. Concrete finishing equipment, line levels, laser survey equipment. Welding and hand tools and power tools. Office equipment, AutoCAD and computer estimating, MC2 and Microsoft products, word, excel, project schedule, projects experience as internal network maintenance and setup. General tech support on computer system. Experience with timberline estimating software, and Plan Swift take off software. Personal References:

Tom Hughes 770-***-****

Tracy D. Knapp 678-***-****

Bill Stanley 404-***-****

David J. Patrylo 770-***-****

Grant Ward 404-***-****

Work experience Approximate Years each held at times several functions overlap held at same time Construction Estimator: 25 years

Construction Project manager: 16 years

Construction Superintendent 15 years

Construction Safety Manager 10 years

Aircraft tooling Manager / Design: 13 years

Maintenance Supervision Gun Range 10 years

Misc. Service Tech 10 Years

Quality manager/supervisor Const. 14 years

Manufacturing manager 3 years

Note: Taken approx. two years off to assist my Wife thru a series of medical issues, from a vehicle wreck and results of internal damage that caused blood clots and these are now in total control and she will return to full time work on 5- 15-2023. These resulted in her inability to drive or work except minor assignments remote for her company. GCB Kennesaw Ga. Estimator Commercial construction (contract temp basis) (2021 3 months) working on projects for upgrades or new space buildout. Majority are in existing facility either new white box or open space with new client and requirement for space modifications to meet their needs. Most are either in the owners or a management company. Includes site visit to determine the actual condition and review plans if existing or make field sketch to go with proposal bid. ICS Atlanta, Ga. Superintendent commercial construction, (202*-****-** months) multi story commercial building addition consisting of steel structure and block brick and full interior all trades. Responsible for shop drawing review and acceptance, estimation of future projects, from concept to hard bid work. Site to final including site layout.

Wesley Robinson Photo

Litchy Atlanta GA. Estimator,( 2019 -2020 6 months) Hard bid restoration and remodel commercial construction. Temp position

Champion Windows of Atlanta Service Tech (2019 9 months) for warranty and construction issues for all products. Warranty work and unload trucks and repair windows and doors and sunrooms under warranty. Left due to no advancement or salary upgrades.

Tiernan & Patrylo. Inc. Marietta Ga. Commercial Estimator (2017 to 2018 12 months) for major remodels of existing structures into office space and family entertainment facilities. Involved site and major structural changes on some projects. Demo thru final finish. Acquire subcontractors and suppliers for projects. Additional projects included manufacturing facility additions and site work. Field trips to obtain information on existing conditions and meetings with possible subcontractors. Use programs to send out data and provide path for project managers such as Builders Connect and pro core. Position discontinued due to lack of sales and work due to majority of work for single client. RCD-GC, Stone Mountain Ga, Commercial Estimator and Field Engineer, (2016 to 2017 13 months). Present position discontinued due to lack of work and company has closed. Computer estimating for Commercial remodel projects in southeast area. RaceTrac convenience stores and Chick Fla A stores and other brands. These generally exceeded a 50% full remodel. Site work, interior and brand change exterior to current design. Duties included develop new sub-contractors and suppliers and sending Request for bids to same. Full review of plans and issue of RFI to owner for unclear or missing information. Attend pre-bid meetings and process final bid estimate and support documents. Creation of new estimate forms to aid in bid day reviews, and to allow for computer input of bid in customer format. Using Microsoft office software and plan swift take off software and an older version of MC2 (personal copy). Sent of assignments as a field engineer to correct issues in field on projects due to errors and improper construction. Make design decisions to correct and submit to customer and their engineering company to get approved and then oversee the corrective action and in some cases do the installation and final punch list items. Cover for superintendents when they had to be gone form project for personal reasons.

Contract Safety Inspector (Kinder Morgan), Gismar, La. Field Safety Inspector and Permit writer for methanol bulk storage terminal. (2014 to 2015 7 months) Provide work safety permits and field inspections for safe working environments and field inspections to insure worker safety and compliance. Environmental testing for confined space entry and hazmat chemicals. Maintain log for permits and close out of permits each day. Develop parking plan and parking permit process. Inspections covering site work to erections of tanks and pipelines and structures and utilities both underground and above ground. Cowan Ace Hardware, Conyers, Ga. (After return from contract work) (2015 to 2016 13 months) part time currently as needed 2020 to current) Floor sales person, meet customers and assist with hardware, plumbing needs, inventory and restocking of product. Maintain area stock display and assist customers for keys and other general duties as assigned.

South River Gun Club, Inc. Covington Ga. (Break from office work) (2004 to 2014 10 years) part time Assistant Manager and Maintenance Supervisor Position were part time at first and developed into a full time position. Responsible for all Site, underground utility and facilities maintenance for 128 acres. Included all new construction and expansion construction. Site work and concrete work. Developed safety plans and quality requirements for facility and equipment. Maintenance of electro-hydraulic-mechanical trap and skeet units and all heavy equipment and tractors at facility. It addition handle all subcontractors on projects and material ordering and design of repairs and new projects. Oversee major events for safety and function for operation of equipment to people moving requirements. MHB Paving Inc. Oxford Ga Contract estimator and part time project manager, (2004 6 months) Estimating and field review and design for site and paving contracts. Create estimates with computer programs and submit info to sub-contractors for work items not performed in-house. Projects regarding asphalt, concrete, walks, curb and gutter, gravel and site prep.

Pepperidge Farm Inc. Franchise owner Route delivery venture of bread products. This was as a venture with using part time help. It was determined it was not a viable venture and was sold. (2003 to 2004 9 months) Kevin Price General Contractors Inc. Covington Ga Position Estimator/Project Manager. (/2003 to 2003 10 months) Commercial construction estimating projects and project management of retail store and grocery store. Use computer estimating and administer contracts to suppliers and sub-contractors. Assist other project managers and design cad drafter with projects.

McMichael’s Construction, Conyers Ga. (2000 to 2003 48 months) Position Chief Estimator Commercial Construction and Sales. Estimating all projects both hard bid and negotiated and design-Build. Projects range up to 10 million. The mixes of products are medical facilities, office, manufacturing, and service and Pre- engineered buildings. These are conventional construction and Pre-engineered construction. The use of the Butler building system-estimating software. Support for estimating software and support to Project managers in all areas as a technical advisor. Assist the field personnel with issues and questions. Sales lead follow up and sales presentations.

Implement new estimating software and assist with a new computer server system setup. Atlantic United Construction, Inc., Conyers, Ga.(1996 to 2000) (4.5 years) Position-Manager Project Support Department, this department encompasses the following areas of responsibility; Estimating, Quality Assurance, Safety, and General Field Superintendent, Support to all Project Management teams and Sales teams and Technical support to upper management and field operations. Commercial & Industrial Chief Estimator and Designer, and Company Safety Director. Duties to estimate the projects to establish a budget estimate and a final build estimate. Duties included the integration of a cad design and estimating system. Safety director position responsible for all job site safety and inspections and the training of personal in both safety, drugs don’t work programs and first aid programs. Development of safety manual and guidelines. In addition responsible for the maintenance of all in-house computer systems and software. Including the purchase and specifications of computer systems. In Addition Worked As Project Manager on A four-story Office Building and 60 Room Motel. Work Consisted Of 25% Hard Bid And 75% Negotiated Design Build. Projects Ranged From 250,000 To 28 Million.

All Steel Buildings, Buford Ga. (1996 9 Months) Contract Position Chief Estimator – This Is A Pre-Eng. Metal Building Dealer Doing Furnish and Erect Type of Business and All Hard Bid Work. Lusk Construction, Canton Ga.(1994 to 1996 22 months) Position-Commercial & Industrial Estimator and Designer. Duties to estimate the projects in both a budget estimate and a final build estimate. The company is a design build general contractor. Duties included the integration of a cad design and estimating system. The introduction of AutoCAD to the company. Design and estimating covered factories to office complexes. Design included the use of pre-engineered buildings and masonry. Also includes conventional design on commercial office complexes. Interface with sub-contractors in the design of project and pricing of it. Duties also included the project managing of fieldwork after project was contracted. Establishment of subs and standard pricing and computer estimating database.

Giltspur Exposervices/Atlanta, Atlanta, Ga. (1993) (Part-Time On Labor Call as Req.), Installation and Dismantle of Convention Booths and Exhibits.

Shepard Convention Services Inc., Atlanta, Ga. (1993) (Part-Time On Labor Call as Req.), Installation and Dismantle of Convention Booths and Exhibits.

G. Allen Construction, Conyers, Ga., (1993) Framer and Saw man on Residential Multi-Story Units. D.D.S. Financial Consultants Inc., Bradenton, Fl. (Part Time) (April To Sept. 1993) Consultant/Sales Rep., Company Provides Assistance To Companies And Individuals For IRS Tax Problems. Mr. B’s Hauling Conyers, Georgia (1991-1993) “Tandem Dump Driver” Haul and deliver gravel, sand, and Asphalt products to job sites from supplier

Imta Inc. Rockford, Illinois (3/1990-10/1991)(Layoff-Position Discontinued) “Manufacturing Manager “Senior Management Position responsible for the manufacturing section, consisting of the production and assembly group and the customer service group and manufacturing review of design section for new products. Additional functions the procurement of all components through a bid cycle. The job schedule and the warranty schedules of the service group and the installation of new products at the customer site. The supervision of the quality control functions both at vendors and suppliers and of all in-house assembly and field installations. The tracking of all components and the constant internal review on cost control of the products. The special projects consisted of five axis robotic centers for the automated assembly of aircraft airframes using a series of interchangeable end effectors. The manufacturing section would be responsible for the project after design to fabricate, assembly, test and installation at customer, and final testing at customer. Major accomplishments; the completion of two systems and delivery to the end user of special airframe assembly cells for the McDonnell Douglas company and the Boeing co.

McDonnell Douglas Co. Inc. Torrance, California (10/1985-3/1990) “Group-Leader Total Quality Management System (TQMS) (Branch-Manager) Tool Fabrication Engineering Design (Tool Design). Seven promotions while at company. Supervision of department engaged in aircraft tool design, consisting of 225 employees, designers and support personnel. Department responsible for n/c tooling and plastic form tooling, conventional machine tooling and fixtures and special machine modifications and assembly jigs and tooling. The standards for the quick change tooling, used in a tqms and world-class fabrication effort. Additional areas of control included the department budget and liaison function within the company with other departments and with tooling and fabrication vendors. The establishment of a master layout department within the tool design unit to provide tool and production layouts for fabrication of parts and tools and the inspection of it. This involved the establishment of cost justification and budget and the hiring of personnel and the training of tool designers to do layout work. The department was established in only 3 months. Several major cost saving programs implemented on both commercial and military programs.

Hieb Inc. Hutchinson, Kansas “Construction Superintendent” (1984-1985) Project and site management for steel erection and concrete for commercial structures. Projects included a two- story motel and several manufacturing buildings. Dock high concrete foundations and floors and paving. Spencer Construction Inman, Kansas “Construction Superintendent” (1984) Project and site management for steel erection and concrete for commercial structures. Projects included the special design and fabrication of additions to commercial structures and foundations and floors. Major warehouse additions.

Bard of Kansas, Inc. Haven, Kansas “Construction Superintendent” (1983-1984) Project manager on out of state projects, site manager for commercial projects in the range of $50,000 to $3.5 million seed research facility in Arkansas. Control of sub-contractors on projects. In addition company operated a manufacturing division where designed special products and supervised manufacturing. Tull Inc. Hutchinson, Kansas “Project General Superintendent” (Site Supervision)(1982) Under contract to design and build a major supper and entertainment club for a local businessman. Provided the actual design and all necessary plans for city approval and for the fabrication and build of the building and interior. Project in excess of $2.5 million and building covered 18,000 sq. Feet and site covered a square city block.

Collins Industries Inc. Hutchinson Kansas “Quality Control Supervisor” (1981-1982) Position reporting directly to president of company. Duties to establish a quality department and procedures for Manufacturing Corporation with a wide range of products. Products ranged from fabrication of parts, sheet metal and machine parts, hydraulic cylinders and hand pumps, handicap lifts and accessories, ambulances, fire trucks and equipment and funeral coaches and custom limousines and a line of school buses and small transit and handicapped buses. Fabrication division included a fiberglass and plastics section. Supervision of inspectors in the various divisions, the establishment of inspection procedures and methods, and a material review board to handle rejections. Served as chairman of the MRB group. Established life cycle testing for special products division for certification of products for the handicapped. In addition developed a quality control manual for the future requirements of company products and for training of quality department.

Wes Robinson Construction Co. Hutchinson, Kansas “Owner-Operator”(1975 to 1981) Company involved in the construction of pre-engineered metal buildings. Work involved site to interior projects in seven states. Sole owner operation with duties from office to field with control of all phases of operation. Direct control of bids and labor and management of a small business. Control of sub-contractors when used on a project. Involved in special design of both buildings and special grain handling systems and the sales of both service and product. Structures from one car garage to 45000 square feet grain storage building. Numerous projects with complete office and shop interiors. Projects included the erection, site, concrete and interiors. Closed company after major government changes to farming and oil field companies. 35 erectors

Contact this candidate