MokaddemSellami

mailto:ad4od1@r.postjobfree.com

Cell phone: 213 (0-663-****** (GMT+1)

Address: Bt F numero 4, cité 300 logements, Bab Dhaya

*****, **** *** *****

ALGERIA

CURRICULUM VITAE

1.Experience:

December 2023— February 2024 Algerian National Petroleum Company:

Role: Gas Turbine Control TA

Supervising and supporting client engineers and Techinicans in Maintenance & Operation activities of MS5001 Turbo-generator power plant.

September2023-to November 2023 at EarthStream Global

Location: Unique Meghnaghat Bangladesh Power Plant Project

Role: GE MarkVIe Integrated Control System Commissioning Engineer

Commissioning of HRSG & BOP MarkVIe Control Systems.

Start up and Operation assistance.

January 2020—July 2023 Algerian National Petroleum Company:

Role: I&C Supervisor

I was in charge of ALL Instrumentation and Control department:

Gas Turbine Power Generation plant,

Wellhead & Gas Compression plant

Working closely with OEM (original equipment manufacturer) representatives

Main Duties:

Instrument and Control Advisor

Ensure that all works are carried out in line with the HSE policies and that all personnel under direction are aware of the policies.

Carry out and supervising installation, calibration, maintenance, and commissioning of all field-based instrumentation and associated cabling, tubing etc.

Review of customer warehouse instrumentation stock levels highlighting shortages, ordering and following up of orders.

On completion of works ensure all relevant documentation, inspection certificates, P&IDs etc are updated for integration with previous documentations.

Provide support as required to large projects executed in the field such that they can be completed timely.

Experience in working with a multi-disciplined, multinational team of professional oil field staff

General knowledge of PTW systems as applied to oil production facilities.

Flexible approach to work for the incorporation of unexpected requirements.

Prepare data sheets, specifications & requisition for all field Instrumentation, Control valves, Analyzers, On-off valves, Safety relief valves, DCS, ESD and FGS system and perform vendor offer review & technical bid evaluation, carryout vendor drawings/documents review and vendor data incorporation for the above instrument.

Report, on daily basis, all works undertaken by Instrument teams on Control and Instrument systems installed on Gas & Oil treatment plant (Separation, Compression, Oil Tank storages, Oil pumping & metering utilities), Water treatment plants, Compressed air systems, Power generation plant etc. and all utilities associated within, as well as the wellhead instrumentation for ESD and control systems.

Participatind and Providing support to Commissioning & start-up and technical understanding to Operation team when needed.

Maintain good communications with all customers and contractors.

November2018-to December2019 at Samuel Knight International (MarVIe)

Location: Ghana Amandi 192 MW Combined Cycle Power New Plant Project

Role: MarkVIe ICS Commissioning Engineer

March2018-to July 2018 at Samuel Knight International (MarkVIe)

Location: Egypt West Damietta Power Plant Project

Role: I&C Commissioning Engineer

Hot & Cold Commissioning of All HRSG & BOP Control MarkVIe Control Systems.

Start up and Operation assistance.

Sep2016-to August2017 at JPC SA Switzerland (MarkVIe)

Location: ED DRAOUCH COMBINED CYCLE POWER PLANT Algeria

Role: Controls TA

DCS and GT commissioning and Operation activities such:

Commissioning &Start up of New Power plant Supply Gas Station

CEMS (Control Emission & Monitoring System) commissioning and SCADA checking for a 9E frame simple cycle Power generation Plant new project

Assisting & advising Client O&M team in terms of GT Operation &Maintenance

Assumimg GE & Client first Inteface and attending meeting for Power Plant continuous operation efficiency.

Punchlist clearance

Feb2016--July2016 Algerian National Petroleum Company: (MarVI)

Role:Simple Cycle Gas Turbine Shift Control Supervisor

Gas Turbine model: GE MS5001 GT

MS 5001 Gas Turbine Simple cycle Shift Supervisor

4 X 20 MW Power Generation Plant controlled by MarkVI controllers.

Operation and Maintenance assistance

GT Overhaul, shutdown planning and site Instrument lock out tag out HSE procedure.

Sep2015-to Feb2016 at JPC SA Switzerland (MarVIe)

Gas Turbine Model: 9E frame simple cycle Power generation Plant new project

Mark VIe control system DCS Commissioning Engineer in new Power Plant with GE Power and Water, Belfort France in Algeria.

March2013-Mars2015Algerian Petroleum Joint Venture Company: (MarkVI)

Role: Gas Turbine Shift Control Supervisor

Gas Turbine model: GE MS5001 GT

MS 5001 Gas Turbine Simple cycle Shift Supervisor

4 X 20 MW Power Generation Plant controlled by MarkVI controllers.

Tasks:

Maintaining GT’s in Operation.

Mechanical, electrical, HVAC and Instrumentation work order, Preventive and Curative maintenance sign off and supervision respecting EHS, Job plan and standard procedures

Alarms analysis and clearing.

MarkVI Control System hardware and Software modifications.

Lock out-TagOutofmechanical and Electrical devices for maintenance and overall works.

Participating in GT overall by GE mechanical team for a zero incident goal.

Reporting daily and weekly Gas Turbine operation and maintenance activities for client.

March2012-Feb2013 Spencer Ogden ltd (MarVIe)

Gas Turbine Model: 9FB frame

Role: I&C and DCS commissioning engineer

DCS Commissioning Engineer in new Power Plant Energy with GE energy Belfort France in 3x109FB single-shaft 1200MW in Koudiet Ed Draouch Algeria,(Mark VIe control system)

Loop check

Screen modification with Cimplicity software.

Hardware installation and configuration

DCS systems functional test.

Start up assistance and faults & Alarms troubleshooting.

Reporting to lead DCS.

March2011 to May2011:

Role: DCS Technical advisor with GE Energy (MarkVIe)

Location: CCPP, Riyadh PP9 Power Generation Plant

Scope: for Punch list and commissioning activities of Turbine Inlet Air cooling TIAC to optimise Turbine performances.

October2011 to March2011 Algerian Petroleum Joint Venture Company: DeltaV

Role:Senior Instrument Technician supervisor

Scope: Supervisor on a new Gas compression Recovery Plant controlled by DeltaV DCS and Power generation plant controlled by MarkVI controllers.

July2009 to October2009 Spencer Ogden ltd (MarVIe):

Gas Turbine Model: GE 9FA frame

Role: ICS commissioning Engineer

Location: CCPP, KSA ( Jubail)

Scope: ICS commissioning Engineer in Jubail, Kingdom of Saudi Arabia new Power and Water Plant (Mark VIe control system) 1700 MW

September2008-May2009 GRANITE INTERNATIONAL SERVICES (MarkVIe)

Gas Turbine Model:GE 9FB frame

Location: Hadjret Ennous (Tipaza—Algeria)

Role: DCS Commissioning Engineer in new Power Plant Energy with GE energy in 9FB single-shaft 1200MW in Algeria

(Mark VIe control system) 1200 MW

Tasks

Duties will consist of the following activities:

-Trace through the software documentation

-Implement control constant modifications

-Reading and Modifying software sequencing

-Operation and configuration of regulators

-Creating and modifying graphics displays

-Set up and modify the hardware and software associated with the BOP, Gas/Steam Turbine Control system

-Implement control system software changes

-Windows NT based operator interfaces

-Work with both analog and digital controls

-Install and terminate wiring, complete functionality checks, and troubleshooting the BOP and Turbine control system.

-Perform start-up/shut-down sequencing and turbine/generator operation

- Report to Lead DCS engineer and commissioning site manager

-Assisting Local Instrument and control Engineers and technicians to understand instrument and control systems inside and outside the control room.

-Use of Microsoft Office tools to establish report to help local operators and technicians to write technical daily report using images, Trends, and P& ID.

-Assisting in the Calibration of end devices including transmitters, limit switches, control valves, transducers and power replays.

-Identification & diagnosis of control system, power output maximization and all subsequent failures for analysis

-Training and mentoring of Local I&C engineers & Technicians.

1991-2008 Sonatrach-Hess (Algerian Petroleum Joint Venture Company):

Location: Algeria

Role: Senior Instrument &Control technician/Supervisor in the oil and gas industry

Tasks

I Install, commission, maintain and repair a wide range of electronic and pneumatic modules in the field and in workshop and on different systems such as:

Distributed Control System (DCS),

Emergency Shutdown System (ESD),

Programmable Logic Controllers (PLC) based systems

Wellhead Control Cabinets,

Reciprocating Compressors local panels

Power generation control system.

- Use of Maximo (CMMS).

Checks for required parameters such as calibration range, unit, scale range of console, factor … etc of the major instrumentation sensors according to there user manuals using multi-meter and Hart communicator

Verify actual work with P&ID diagram.

Witness during loop check and installation of different process control instrument

Done functional testing of different field instrument and making configuration as per data sheet.

Calibration of different renowned field electronic instruments such as Yokogawa, Rosemount, Fisher,

Maintenance of oil, gas condensate and water separation platform including expander compressor machinery.

Complete the cold wiring and the power supply checks.

Runs the instrument and completes the onsite calibration.

Checks reading and confirms if matching with my company Control Standards and performs any required tuning for the controllers and checks any interlocks in the system.

2.Education:

HND 2.5 years degree : in Electronic, Industrial control option. 1987-1990

Certificate on GE Fanuc PLC control system Logicmaster 70, Field control Block, Genius Block, Gas control valve in USA: With ICS (Albany, NY )

Certificate on Mark VI control system in Nuevo Pignone GE school training in Florence Italy.

Certificate on DeltaV DCS control system in Emerson factory in Lyon France.

3. Knowledge, Abilities, and Skills:

Work under steady pressure with frequent interruptions.

Considerable knowledge of the practices, methods, instruments, and materials used in electrical and pneumatic construction, installation, repair, and testing; knowledge of compressor and turbine controls and management systems.

Knowledge of the principles and operation of pneumatic and hydraulic control systems.

Knowledge of the construction and functions of a wide variety of electrical equipment used in power generation, transmission, and distribution.

Skill in the maintenance and repair of temperature, pressure, and flow measuring devices.

Skill troubleshooting of instrument and control malfunctions and in selecting the proper corrective action.

Skill in the safe use of a variety of manual and power tools.

Skill in the application and use of a variety of test instruments and equipment including personal computers, micro-processors, voltmeters, ammeters, ohmmeters…

4. Organizational Relationship/Latitude

Regular contacts with Process Operators, Foremen, Technicians, engineers, Electricians and mechanicals for coordination of maintenance and repair work.

Contacts with contractors personnel during installation and commissioning phase of the new projects, major maintenance and shutdown works.

Works according to standard procedures, instructions and /or technical specifications, uses initiative when diagnosing/rectifying systems faults.

Completed work is spot-checked by instrumentation hierarchy.

Sharing technical knowledge with colleagues and contractors.

5. (HSE)

Role: Complied with Company’s safety rules regulations with regard to work permit system.

Knowledge of all safety rules as stated in the adopted safety manual.

Participate in Emergency team and takes active part in all training and Knowledge of the occupational hazards of the electrical trade and necessary safety precautions.

6. Languages: Written and Spoken Fluently three languages:

Arabic

French

English.

Contact this candidate