RICARDO MEDRANO

Phone: 832-***-****

e-mail: ad4maj@r.postjobfree.com

***** ***** ****** ***** **. 77388 Spring, Houston Tx.

Driver’s licence "C".

CAREER: ‘’Veterinary medicine’’ (Bachelor, 5 years) University completed.

"NATIONAL MAJOR UNIVERSITY OF SAN MARCOS ", Lima Peru. (April/1994-Dec/1999).

*FINISHED STUDIES:

EEUU-UNITED STATES OF AMERICA:

1-AIR CONDITIONING BILINGUAL CERTIFICATE (HVAC Technician), Houston Community College HCC, 160 hours (02/01/2019 – 05/17/2019).

-Air Conditioning: SuperHeat, Sub Cooling, low and high suction pressure, low and high discharge pressure, temperature difference, delta "T", wet

Bulb, dry Bulb, Seer, pump down, Heat pump, temperature and pressure analysis in evaporator, temperature and pressure analysis in condenser,

Evaluate machine (symptoms), machine diagnostics, repair, modification (if necesary) and troubleshooting.

-Electricity: Parallel and serial connections, the law of OHM (energy, Resistance, Impedance), symbology, contactor, compressor resistors (Run,

Star, Comun) and capacitor fan, compressor start and capacitor fan with a capacitor, with two capacitors (different shapes), energy saving with the

Run Star capacitor, a Power Relay and a Star capacitor (different shapes), connections in the Thermostat using a C/120/208/240 transformer - 24v,

Fan gear change, Sequencer, Heater.

-EPA Universal (esco institute, program EPA Approved, permit for handling refrigerant gases).

-10 Hours of OSHA.

-Scissor lift Certification.

SPAIN-MADRID (EUROPE):

Professional certificate for air conditioning and climate:

1-PROFESSIONAL CENTER FORMATION IN TECHNOLOGIES OF THE COLD AND THE CLIMATE, MORATALAZ-MADRID, SPAIN (07/01/2010-

“Cold and heat Technologies, climate technologies, Air conditioning technologies (service)”. (02/23/2011).

-300 Hours Electricity and automation applied to air conditioning and climate and cold,

-500 Hours -Assembly and maintenance of facilities of climate and ventilation-extraction,

-Non-labor professional practices, 6 Months, (INTRA S.A.)

-Licence for Refrigerant gas handling (Universal EPA similar).

2-SAINT DOMINGO SAVIO SALESIAN COLLEGE (11/06/2009 - 03/26/2010).

“Installation and maintenance of air conditioning and equipment” ISO standard, Madrid-SPAIN, (450 hours).

-Sequential related to training modules in both centers of studies:

-Organizacion, execution of the assembly, star-up and regulation of air conditioning and ventilation-extraction installations.

-preventive maintenance and corrective maintenance of air conditioning and ventilation-extraction.

-installation of systems of cold and climate pipes and elements auxiliary of regulation and control of systems of heating and air conditioning.

-Installation and assembly of electrical equipment for cooling systems.

-Process of loading and commissioning of commercial, industrial and air conditioning equipment.

-Diagnosis and repair of faults and breakdows in cold, climate and air conditioning installation.

-Repair and modify if necessary refrigerating and electrical equipment and installation.

-Interpretation of assembly manual and electric manual (assembly and wiring electrical diagrams).

-Preparation and assembly of fiber ducts (ductboard) and pipes.

-All this interpreting plans and schemes of cold and air conditioning applying the regulation and norms of cold national and international.

-training witnign the professional training system for employment regulated by order TAS/718/2008, of March 7, Royal Decree 34/08, of Janyary 18, wich

regulates professional certificates, and RD 1375/2009, of August 28, CERTIFICATE OF PROFESSIONALISM IN ASSEMBLY AND MAINTENANCE

OF AIR CONDITIONING AND VENTILATION-EXTRACTION INSTALATIONS.

3-Professional Construction Card (30 Hours), (Valid for the entire European Union), prevention of a risk at work (30 OSHA Similar).

*WORK EXPERIENCE:

**UNITED STATES OF AMERICA (EEUU):

1-HVAC SERVICE:

-Star Service, INC. : 7425 Major St. Houston TX. 77061 Phone: 281-***-**** (02-24-2023 – Currently )

*Duties: Installation, regulation of HVAC Units in production plants in Pasadena, Deer Park, Baytown, Freeport etc.such as:

INVISTA Houston Chemical Plant, Afton Chemical, OXY Vinyls Pasadena PVC., OXY Vinyls deer park, OXY VinylsTidal Deer Park, OXYChem

Battleground La Porte, ITC international Terminal Company, Total Energies Petrochemicals & Refining USA, Inc., INEOS Chemical Plant,

Air Products, Chevron Phillips Chemical - Pasadena, Chevron Phillips Chemical Co – Cedar Bayou Plant, Covestro Contractor Entrance, Baystar

Bayport Polimers, Valero Texas City Refinery, Rain Cll Carbon Louisiana, Valero Ardmore Refinery-Oklahoma, etc.

2-SHEET METAL JOURNEYMAN, DUCT INSTALLER:

-Kilgore Industries. 10050 Houston Oaks Dr. Houston Tx. 77064 713-***-**** (03-12-2022 - 12-02-2022)

-Letsos Company Mechanical Contractors. 8435 Westglen Dr, Houston Tx. 77063 Off: 713-***-**** (03/22/2021 - 02/09/2022)

-HAR-CON Mechanical. 9009 West Little York Houston Tx. 77040 Off: 832-***-**** (08/05/2020 - 12/07/2020)

-HCL Mechanical Services, LLC. 6877 Wynnwood Lane Houston Tx 77008. Off: 713-***-**** (01/27/2020 - 07/13/2020)

-TDIndustries Inc. 9525 Derrington Rd. Houston Tx 77064 Phone: 713-***-**** (08/25/2018 - 01/14/2020)

-WALSH AND ALBERT COMPANY, LTD. 19300 Oil Center Blvd. Houston Texas, 77073 Phone: 281-***-**** (01/04/2016 - 08/13/2018)

-MC CORVEY SHEET METAL WORKS LP. 8610 Wallisville Rd. Houston Texas, 77029 Phone: 713-***-**** (06/15/2015 - 12/31/2015)

-niMEMCOStaffing. 4555 Dacoma St. No 100 Houston Texas 77092 Phone: Off: 713-***-**** (work directly for Mc Corvey) (03/14/2015 - 06/14/2015)

*Duties in all of my previous jobs:

-Installation, modification (if necessary), preparation of metal ducts (Straight duct, trousers, elbows, offsets, detours, popcorn, “R”), Interpretation of prints,

Laid out, Installation VAV, CVB, FPTE, Fan-coils, Split, Fire Dumpers, regulators, Hard Hook Up, installation of ventilation and handling air units (panels)

air treatment units, installation of pipes, ducts and boxes of extraction, connections in machine room, take measurements and order materials,

transitions, canvas, installation of curves in the roof, installation of extraction ducts in swimming pools, installation of linear and rotational diffusers on the

ceiling, access doors on the ceiling, all this interpreting plans and diagrams of cold, air conditioning and heating, applying thre standards and regulations

of national and international air conditioning.

**SPAIN-MADRID (EUROPE):

SHEET METAL MECHANIC (Duct Installer) and FIBER DUCTS MECHANIC (Ductboard), experience in Companies such as:AISCON S.L., RYACAN

S.L., AIRCAVEN S.L. etc. (12 years of experience 2000-2011), Installation, modification (if necessary), preparation of fiberglass ducts (Straight duct,

trousers, elbows, offsets, detours, popcorn, “R”), Interpretation of prints, Laidout, Installation VAV, CVB, FPTE, Fan-coils, Split, Fire Dumpers,

regulators, Hard Hook Up, installation of panels and ventilation and air treatment units, installation of pipes, ducts and boxes of extraction, connections

in machine room, take measurements and order materials, transitions, canvas, installation of curves in the roof, installation of extraction ducts in

swimming pools, installation of linear and rotational diffusers on the ceiling, access doors on the ceiling, all this interpreting plans and diagrams of cold,

air conditioning and heating, applying the standards and regulations of national and international air conditioning.

A few works carried out in Madrid-Spain: Airport - BARAJAS T2 and T4 (AENA), BANKINTER (head office: Tres Cantos,Realized by faces), Hotel -

OSUNA (Canillejas), experience in housing, offices, hospitals etc.

+AIR CONDITIONING SERVICE Experience:

-“INTRA” INSTALLATIONS AND TREATMENTS S.A. (8 months, year 2011), Mechanical Maintenance and service of Air Conditioning Installations.

-IDIOMA: Native Spanish, Basic English, Japanse, Portuguese.

Contact this candidate