Kevin Mowrey

Glen Ellen,CA

707-***-****

ad4kno@r.postjobfree.com

Experienced QA/QC TECH with extensive machine shop and electrical skills, seeking FULL TIME, LONGTERM employment with a growing company.

(09/2023)

QUALIFICATIONS AND SKILLS:

1983-2014: Quality Control experience, Metrology Lab Inspector: GDT, Optical Illuminator Microscope (QC500 software), White Light Interferometer Microscope (zygo)

(flatness/finish), Drop Indicator (heidenhain), Laser Micrometer, OGP-optical comparator, Toolmakers Microscope (QC500 software) (Nikon).

First article, line inspection of employees/documentation of every fifth part, CMMs. Metrology testing equipment. Micrometers, calipers, depth gauges etc. QC on cmm machine, lazer mic, calipers, height and drop gauges and various qc equipment, 1st article inspections, data entry and running inspection reports.

Quality Control on plastic injection molding machine products and lining machine products. Quality Control on the complete manufacturing floor including cleanliness of floor and all manufacturing machinery.

Keyence Measurement Machine (probe/light), Micro Vu Measurement Machine

(light emitting), Microscopic Inspection. Using a Analytical Balancer to weigh molding machine parts twice a day and report. 1st Article/Final Inspections for Robot Machines. GDT, Optical Illuminator Microscope (QC500 software), White Light Interferometer Microscope (zygo) (flatness/finish), Drop Indicator (heidenhain), Laser Micrometer, OGP- optical comparator, Toolmakers Microscope (QC500 software) (Nikon). General tolerances were in MICRONS…

Dis-assemble/assemble, inspection/troubleshoot, purge/clean plastic injection molds and repair of core pins, bubble tubes, cavities/cores etc. Mills, lathes, surface grinders, polishing, etc. Inspection with magnifying lens, optical comparators, microscopic viewers, micrometers, calipers, gauge Pins etc

1983-2014 Machining: Manual mill (horizontal/vertical) and lathe, surface grinder, tool post grinder, NC and CNC mill (bridgeport, brother, moris seki, fadal, mazak, and others)/lathe, etc. Set-up, run, operate, program/edit, line inspection and train new hires, deburr. Plastic injection mold machine set-up, extruders, grinders, and hoppers. Set-up/Auto heat, Run, mix concentrates (color), mixes for cap/core for extruder, etc. Manual mills/lathes/cnc.

1994-current: Electrical Experience: State of Colorado Electrical License & State of California Electrical Cert. Industrial, Commercial and Residential. Responsible for the safety of equipment and persons, training apprentices, layout from blueprints, code calculations from codebook for installation. Wiring panels, disconnects, motors, equipment, switchgear, bending conduit/installing, etc.

Supervisory experience: Lead set-up/first article inspection on CNCs, training and supervision of apprentices and running job sites.

Bottling and conveyor line experience, maintenance/assembly and repair. I have extensive machine and building maintenance, installation and QC experience. Mastercam visi and solid works experience included. 1983-2014, I spent years after high school working in machine and mold shops. In 1994, while I was an apprentice electrician, I kept my machine/mold skills honed by working part-time at night because I love the trade and did not want to lose what I had learned. I feel very successful and have great pride in accomplishing the feat of being a craftsman in three very highly technical trades. I love and admire close tolerance work whether it is in machining, molding or electrical Maintenance Skills: Lic. Electrician, building and machine maintenance, homeowner/landlord w/property (plumbing, carpentry, grounds, etc.) Forklift experience and warehouse work is involved with all the following: Kevin Mowrey

Glen Ellen,CA

707-***-****

ad4kno@r.postjobfree.com

EMPLOYMENT:

8/29/2022-9/8/2023: (layoff) P&L Specialties.: I ran/operated the electrical operation of the Loring Smart Roasting Machines at P&L Specialties, electrician, control panel building, quality assurance, testing of the electrical installation. installation of vfd programming/troubleshooting/repair, assisted in maintaining scheduled outgoing orders and electrical supplies as needed. 5/15/1994-7/10/2023: I.B.E.W. Electrician.: Industrial/Commercial electrian, Quality Assurance. 8/13- 9/14: Peterson Fluid Systems, Henderson, CO

I was the only manual machinist in the shop. Duties also include machine repair/maintenance and set- up.

I assisted in cnc machines and line inspection as well. 3/13-8/13: RolInc and Employment Solutions (T.emp Agencies) Building maintenance, electrical, and machine repair and installation, CNC and programming 3/2012-3/2013- Quality Control Inc, Englewood, CO

Set up, ran and inspected manual lathes and CNC mills! Also set up machines and trained new hires. Very high-pace, low production, very low tolerance .0002) machining on manual mills and lathes. QC for new hires.

** FROM 11-2011 to 3-2012 I WAS UNEMPLOYED DUE TO A FAMILY EMERGENCY and went to Colorado. **

2007-2011: Innovative Molding, Sebastopol, CA - I worked in engineering on R&D projects with the engineers. Responsibilities also included machinist, repair and maintenance. QC of machined pa 5/04 to 2007: Arcturous Marine, Rohnert Park, CA Lead set-up person on several types of Haas CNC milling and lathe machines…

DKG, Novato, CA Setting up, running and editing on a Akira Seki CNC Mill & Lathe.

** On MAY 3rd of 2004 I moved to Northern California. ** Up until 5/3/04: I was Lead man for a plastic injection mold manufacturing and machine shop. I also did building maintenance, and machine repair.

1994-2003: I worked as a Journeyman Electrician, Building and Machine Maintenance, Machinist

(CNC/manual), Mold Machine Operator, etc.

1983-1993: I worked as a Machinist, CNC, Tool & Die, Mold Machine Operator, etc. EDUCATION:

Brighton High School - Brighton, Colorado. I graduated in 1983. General courses with woods and electronics classes C.E.T. - Denver, Colorado. 1983- Certificate in Machine Shop Skills including manual mills, lathes, NC machines, tool post grinders, surface grinders, saws, etc. Front Range Community College -Westminster, Colorado. CNC program & control including; set-up, run, program and editing courses in 1984 Mechanical Drafting and Blueprints courses in 1985 Pre-Algebra and Speech courses in 2003

N.J.A.T.C. -Denver, Colorado. I completed this electrical apprenticeship in 1999 from which I tested for and passed the State of Colorado Electrical Exam. I am a Licensed Journeyman Electrician. The N.J.A.T.C. is a 5-year electrical apprenticeship through the International Brotherhood of Electrical Workers. The curriculum was through the Emily Griffith Opportunity School in Denver, Colorado. Along with the electrical license I accrued 52 credit hours that I will apply towards a degree of my choice.

Contact this candidate