Syed Mobin Uddin

***** ******** *** *** #**, Tustin CA 92780 H: 714-***-**** ad4dzm@r.postjobfree.com.

Objective

To seek a position as a System, Electrical or Electronic Engineer in the electronic/electrical, mechanical and biomedical industry. Utilizing my interests, work experience and education in designing and modifications of electronic equipment for the above Industries.

Education

B.S.E.E. MARCH 2010 SOUTHERN CALIFORNIA INSTITUTE OF TECHNOLOGY

·Major: Electronic and Electrical Engineering

M.S.S.E. OCTOBER 2013 COLORADO TECHNICAL UNIVERSITY

·Major: Systems Engineering.

Skills & Abilities

SKILLS

·Experience with PLC software, Robotics, C++, Verilog, VHDL, Python, AutoCAD, MATLAB, Analog & Digital Electronic Circuit Analysis, Thermal Systems, Oscilloscope and Voltmeter use, FPGA, Arduino, Raspberry Pi, Computer Hardware, Software, Network Systems, Data Analytics, Research and Development, Hardware Design, Troubleshooting, Hardware Calibration, SMT machine utilization, Assembly, UPS Power Supply Integration, Biomedical Devices (Polaris, Onyx, Lab cite Echo, Thermo-cycler, RT qPCR, Liquid Handling), Microsoft Office Python Scripting.

Experience

System Engineer Honeywell 11/15/2023- Current.

. Working with documents (Validation and Verification).

. Redlining the test protocols for new updates, rewriting specifications, change protocol process.

. Testing Vane axial fan, DC Motor and Cooling Unit for Aerospace.

. Setup the testing environment according to the updated protocols.

Test Tech GDMS 05/02/2023- 11/02/2023.

Assembling and testing the proto types mostly wireless communication devices like Bronte 3, Filip and some tripod stand antennas.

Collecting and analyzing the data and RF values gather through different testing procedures and analyzers like Oscilloscope, spectrum network analyzers and different meters.

Testing and downloading the frim ware on the board, using different converters to provide analog and digital signals to the embedded microcontrollers

Test Tech Alcon 07/15/2022- 04/28/2023.

Operating and troubleshooting medical devices used for eye treatments.

Collecting data through different testing procedures and report to R&D scientist.

familiar how to work with robotic arm

Perform environmental stress screening test by running the apparatus in hot and cold temperatures.

perform assembly and disassembly according to the situations under the test.

Test Tech Bench mark 07/07/2020- 06/05/2022

. Working with LCDs, PFDs, and SDs. Perform testing like electrical, temperature and stress (ESS).

. Familiar with wiring, harnessing, assembling and dis assembling according to the situation.

. Trouble shoot to the component level.

. Working with low voltage and high voltage equipment, wave form generators, Digital volt meters, oscillators and load firm ware on the PC boards.

. perform ESS (Environmental stress screening) test during and assembly.

Test Tech Panasonic 10/23/2019-07/02/2020

• Working as a IFE (insight flight entertainment) system test tech.

• Working with WISP (wireless internet service provider) and portal system.

Test technician Alcon 05/07/2019- 10/10/2019

• Working as a test tech in the PCB department using different fixture on ICT.

• Working with flying probe testing system.

• Down load firm ware on the tested boards.

TEST TECHNICIAN BE AEROSPACE 11/2017 – 05/04/2019

. Working as a test tech on different temperature control systems (chillers) which include trouble shooting, disassembling and reassembling of different parts like compressors, pumps, heaters and E-panels of chillers.

. Electro Mechanical Assembling and insulating different modules of chillers.

·Wiring in E panel and connecting panel with mechanically assembled system.

·Trouble shoot any problem while chillers were running if required.

·All types of testing like pneumatics, hydraulic and electrical perform on all kind of chillers.

·Follow ISO and GMP procedures while working either in the R&D LAB or on the floor.

·Use Verilog HDL in electrical motor control in HVAC chiller system

OPERATOR/TECHNICIAN EXTRON 08/2017 - 11/2017

·Finished an assignment with Extron on SMT machine.

·Loading and unloading feeders, move tables and Carts with reels into the SMT machine.

·Load and unload boards from the machine.

SYTEMS TECHNICIAN A SEA 04/2017 – 08/2017

·Refurbished the used inverters of power ranges from 12 KVA till 33 KVA.

·Assembling reassembling and disassembling of different power modules, proto types and test equipment by using hand tools and some electronic tools.

·Test different components like IGBTs, Inductors, PCB and wiring using multi meter.

·Rework electronic and electro-mechanical units including switches, potentiometers, gear boxes, circuits, regulators.

·Wiring and harness wires in the system as required.

SYTEMS TECHNICIAN/ ASSISTANT ENGINEER EARTH LCD 10/2014 – 04/2017

·Perform electronic assemblies for several monitors from 3” to 20”.

·Uploading software or firmware on different systems and modification of PCBs according to the need of systems used for monitors.

·Read and interpret procedures, blue prints and schematics.

·Set up the system to test with equipment like oscilloscope, DMM, air and pneumatic pressure gadgets and different software.

·Shipping, receiving, auditing and data entry also included in the job duties.

·Helping R&D in building proto types and developing new systems for monitors by modifying software and PCBs.

·Debugging and rerunning the systems for improvement also trouble shoot and repair the testing equipment.

·Perform QC on the end product.

·Use VHDL to design automation to define mixed signal system, like FPGA and integrated circuits.

SYSTEM TECHNICIAN B.I.T. GROUP OF COMPANIES 06/2014 – 10/2014

·Perform electro mechanical assemblies and dis assemblies like heater wall, LCD display power supplies, outer and inner walls, piping and dilutors, robotic arms, and rotors of different bio medical equipment like Polaris (used in surgeries) and Onyx (used as an allergies analyzer), also use chemical analyzers like photo meters and illuminometers.

·Perform maintenance testing like pneumatic and hydraulic pressure testing by using different compressors, and electrical safety testing and loading of software. Perform required programming of PLC, C++ and auto cad for device assembly till a certain level.

·Documentation of all performed and established procedures by using ladder diagrams.

·Maintain power supply instruments like UPS and generators.

·Instrument maintenance up to component level like PCB, motors and photometer etc.

·Use Oscilloscope and Voltmeter to sort out the minor problems of the PCBs.

·Perform final product preparation of units to be shipped or released.

·Use PLC software and sensors for the conveyer belt and the movement of samples through the identified gates.

·Redesigning and designing of the different parts used in the medical devices by using auto cad.

·Follow blue prints, do soldering, where it is necessary, and use power tools like electrical screw drivers for faster work.

·Use inverters and converters for shifting powers from AC to DC and DC to AC also a low power DC to high power DC.

ELECTRONICS TECHNICIAN LAB WEST MEDICAL LAB 01/2007 – 08/2014

·Performed disassembly and cleaning of instrument components according to customer’s

·specification.

·Perform the operations which need a three phase electric power systems required to maintain the electric power supply stable to the different instruments through the UPS. A three phase system handles the supply between 480 volts to 2300 volts to keep the running system smooth and steady.

·Maintained, operated and troubleshoot the hardware and software of different clinical electronic equipment.

·Calibrate and run controls on multiple medical devices.

·Implement necessary commands for the PLC program into the system for the movement of samples.

·Maintenance of the digital circuits in heavy medical equipment like Centaur, Ad via, and

·Immulite2000 for better and according to in house specification of sample result.

·Complete necessary related documentation in accordance with established procedures.

ELECTRONIC TECHNICIAN BIO-RAD LABORATORIES 04/2009 – 10/2010

·Perform in-process testing and finish product testing to ensure conformance to in-house

·Specification and good manufacturing practice.

·Set up, calibrate, and repair equipment. Perform functional tests on ensure equipment are according to their specification.

·Use PLC software for the conveyer belt and auto cad for the designing the new parts if necessary also use mat lab and C++ for the required performance of the parts.

·Troubleshoot and repair to components level for controller boards.

·Maintain spare components for repair, and long lead time components in stockroom

·Prepare technical reports, protocol logs, quantitative and qualitative analysis for process

·Improvement for the departments of Formulation and R&D.

SYSTEMS TECHNICIAN IRVINE ANALYTICAL 07/2004 – 12/2006

·Assisted scientist in preparing technical data for R&D.

·Operated different pharmaceutical and medical devices for quality assurance of

·Pharmaceutical products.

·Works with analog power circuits of small medical devices to control the flow of current in

·Ultra Violet spectrophotometers and Auto Titrations equipment.

·Responsible for quality control analysis of raw materials for compliance with specifications and

·Report abnormalities.

ELECTRONICS TECHNICIAN ANTEC DIAGNOSTICS 02/2002 – 12/2006

·Performed wide variety of laboratory tasks. Ran control and identify instruments problems.

·Performed component maintenance manuals and all other applicable technical documents.

·Wrote descriptive statements related to the condition of the instrument assemblies.

Contact this candidate