SADIQUE MOHAMMAD SHAIKH

Resident Address:

Kharghar, Navi Mumbai-India.

Mob.: 009***********

E-mail: ad4ajk@r.postjobfree.com

Skype ID.: shaikh.sadique1957

OBJECTIVE:

To obtain a meaningful and challenging position that would best utilize expertise in the Technical & Management Environment. A Position that enables me to engage technically manages people, interface with customers / clients and allows for career advancement.

ABILITY & SKILLS: Demonstrate skills in presentation, communication, negotiation and ability to build and lead teams of diverse population to meet business objective.

EDUCATION:

Qualification/Institute/Year:

1. BSC. (Hon) Mathematics, Marathwada University, India,1980.

2. B.E. Instrumentation, University of Pune, India, 1985

TRAINING UNDERWENT:

DCS Foxboro I/A Sys. V2.1 Configuration Training at Bells control, Mysore, India.

In-plant training DCS Honeywell 3000 and PLC-620 at Deepak Fertilizers & Petrochemicals Corp., India (DFPCL) in 1985-86

In-plant training PLC Siemens S5 for Gas Fired Boiler Firing Sequence Logic at Deepak Fertilizers & Petrochemicals Corp., India (DFPCL) in 1985-86

EXECUTIVE SUMMARY:

Carrier Summary: Overseas

1. Dodsal Engineering Pte LLC, Dubai, UAE, Discipline-HOD (GM)-Instrumentation, November 13, 2013 to 19 May 2015.

2. CH2MHILL VECO Engineering, Abu Dhabi, UAE, Senior Instrumentation & Control Engineer, June 12, 2011 to November 01, 2012

3. Technip France Abu Dhabi, UAE, Principal Instrumentation Engineer, Dec. 03, 2009 to April 18, 2011

4. Jacob Zate Al-Khober, Saudi Arabia, Department Manager (HOD)-Instrumentation, Oct. 01, 2006 to Sept. 30, 2009

5. Petrofac International, Sharja, UAE, Senior Instrumentation Engineer, June 28, 2005 to June 12, 2006

6. APC International Sharja, UAE, Consultant- Instrumentation & Control System, July 04, 2004 to June 03, 2005

7. AMCDE Al-Khober, Saudi Arabia, Project Engineer, May 08, 2000 to August 15, 2003

8. Al-Hassan Trading and Contracting Co, Oman, Instrument Engineer, Aug. 31, 1996 to Aug. 31, 1999

HOME COUNTRY:

1.Petrofac Engineering Services India Pvt. Ltd., DLF Cybercity, Bldg.-14, Tower B, Gurgaon-122002, Haryana-India, Senior Consultant (Lead Engineer-Instrumentation and Control), January 14, 2019 to November 15, 2019.

2.UPCEM Engineering & Consulting Pvt. Ltd. Ghansoli, New Mumbai, India. Discipline-HOD (Senior Consultant)-Instrumentation & Control system, February 20, 2017 to 28 February 2018.

3.Deepak Fertilizers & Petrochemicals Corp., India (DFPCL), Project Manager-Instrumentation and Control System, Jan 01, 1986 To August. 30, 1996

2.1Do, Assistance Manager Instrumentation, Jan 01, 1991 to Dec. 1992

2.2Do, Senior Instrumentation Engineer, Sept 01, 1988 to Dec. 1990

2.3Do, Instrumentation Engineer, July 01, 1985 to August 30, 1988

FIELDS OF EXPERIENCE:

1.PM: Project Management

2.FEED: Front End Engineering Design

3.EPCC: Engineering, Procurement, Construction and Commissioning.

4.PEM: Project Engineering Management

5.PMC: Project Management Consultant.

6.PMM: Project Maintenance Management (CMMS)

Demonstrate the discipline skill under various capacities from Instrument Engineer to Project Manager, Department Manager (HOD), Project Engineering management and PMC in reputed Engineering Consultancies and processing Industries like Petrofac, Jacob Zaite, and Technip, Ch2mhill Veco Engineering, Dodsal Engineering and construction Pte, Deepak Fertilizers and Petrochemicals Ltd-India.

KEY EXPERIENCE:

35 plus years of experience in various level of Project Management & FEED, EPCC&M in instrumentation and control system engineering in Petrochemical, Fertilizer, Power Plant and Oil and Gas Industry, Onshore & Offshore environment right from Conceptual, FEED, Design & Detailed Engineering, Construction, Mechanical Completion, Pre-commissioning, Commissioning startup and handover to owner/Client.

1.Provides Professional Engineering and Project support to engineering management and construction of sites related to Integrated Control and Safety (ICSS) / Process Automation System (PAS) including Interfaces, Distributed Control System (DCS)/Automation, Emergency Shutdown Systems (ESD), SIS, Fire & Gas System, Power Management System (PMS), Operator Training Simulator (OTS), IAMS (Integrated Asset Management System), Machine Monitoring System, RIS (Reliability Integrity System), Vibration Monitoring System (VMS), Control System Security and Control System network and other complex systems such as Analyzers (AMADAS & QMI), fiscal metering and tank gauging systems, Automatic Terminal System Wellhead Control (WHCP), RTU, SCADA & OPC.

2.Organize and direct company’s resources to efficiently and effectively manage Instrumentation & process automation projects.

3.Ensure the project/site installation, engineering and design are well executed, and projects are delivered according to agreed timelines and cost limit.

4.Work closely and negotiate with site managers, suppliers, sub-contractors as well as customers to optimize project costs and quality.

5.Supervise and lead a team of engineers and designers in carrying out detailed engineering for large sized projects assuming entire responsibility for conceptual and detailed design and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

6.Review the ITB (Invitation to Bid) documents submitted in the proposals stage, issue inquiry requisitions, review techno-commercial vendor offers, prepare equipment, material and man-hour estimates.

7.Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications Process Data Sheets (PDS), Piping Material Specifications (PMS), Piping & Instrumentation Diagrams (P&ID's), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings, Fire and Gas Detector Layout Drawings and other relevant documents. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to projects/client.

8.Verify and conceptualize the most optimum work route. Identify a clear scope of work/supply and accordingly plan/schedule the engineering activities and manpower resource. Identify and quantify total number of engineering deliverables, man-hour allocation, and format of delivery, time schedules and other requirements for execution of the work.

9.Coordinate with projects and planning on project time schedules, establish target completion dates, ensure target dates are achieved.

10.Develop Manpower charts and schedules, recommend, assign and distribute manpower for the execution of engineering activities within budgeted project man-hours. Recommend cost effective measures to reduce overall manpower costs.

11.Organize the preparation of equipment and material specifications and data sheets, administer the development of detailed engineering calculations and drawings including the preparation of the design basis document, Instrument Index, Input & Output Lists, Bill of Quantities, Block Diagrams, Equipment system specifications, cable routing, control room layouts, Cause and Effect Diagrams, Complex Control loop narratives and Safety narratives, Loop Diagrams, Functional Logic Diagrams, Terminations Diagrams, Installation Hook-up Drawings, Instrument Plot Plans, Control Panel Drawings, Control/Equipment Room Lay-outs, Cable Tray/Trench Layouts, Cable Schedules and Cable Drum Schedules, JB schedules, Interconnection Schedules, Installation detail drawings, Fire/Smoke Detection Lay-out and Alarm Lists. Provide inputs for the preparation of plot plans; organize the issuance of engineering drawings and technical documents for Inter-Discipline Checks (IDC's) coordinate with other engineering discipline in the integration of data inputs.

12.Direct the preparation of technical inquiry requests (Inquiry Requisitions) to vendors; participate in the technical evaluation of vendor bid offers. Direct and provide guidance in the Technical Bid Evaluations (TBE), review vendor drawings and documents. Supervise the review of design calculations, ensure vendor equipment specifications meet with client equipment specifications and are within budgeted costs.

13.Coordinate the preparation of Purchase Requisitions for the procurement of equipment and materials. Ensure materials are obtained within scheduled time frames and budgeted costs.

14.Interface and regularly meet with client and vendor representatives, conduct internal staff meetings, ensure the progress of project in accordance to schedule, allotted man hours and budgeted costs. Coordinate with projects and planning departments on schedule related issues. Update TDR progress reports through the use of subject software.

15.Direct and monitor Material Take off (MTO) activities, identify irregularities and shortfalls, take corrective action as required.

16.Participate in HAZOP meeting and undertake SIL studies with client and representatives of other engineering disciplines.

17.Interact with Quality Assurance for quality issues; strictly ensure compliance With Company's ISO Quality procedures. Coordinate Internal and Client audit requests; facilitate audit procedures of engineering systems within the department.

18.Support for inspection such as FAT, IFAT, SAT, ISAT by complying COMPANY standards according to the planned activates.

19.Good understanding of communication protocols like Modbus, International Electrotechnical Commission (IEC), API, SPA, RP570, ANSI and General Process Automation Protocols.

20.Have good knowledge to implement international standards applicable on Instrumentation such as ISA, API, ANSI, NFPA, IEC, AGA, NEMA, NEC, IEEE, JIS etc.

21.Hands on experience in using standards related to intrinsically safe systems and electrical systems for instrumentation including ISA RP12.6, ISA RP12.2.02, ISA TR12., API, MPMS, ANSI MC96.1, NAMUR IEEE 518, IEEE 1100, IEC 60529, IEC 61508, IEC 61131, IEC 61511, NEMA ICS 6, NEMA 250, NEMA VE 1, NEMA VE 2, NFPA 70/NEC and UL 94.

22.Familiarity with SABIC, Saudi ARAMCO SAES, SAMSS, and SAEPS, SHELL Standard (DEP-Version 38/ADCO Developed Standards, TOSS/TOSD

23.Hands on experience in using standards related to intrinsically safe systems and electrical systems for instrumentation including ISA RP12.6, ISA RP12.2.02, ISA TR12., API, MPMS, ANSI MC96.1, NAMUR IEEE 518, IEEE 1100, IEC 60529, IEC 61508, IEC 61131, IEC 61511, NEMA ICS 6, NEMA 250, NEMA VE 1, NEMA VE 2, NFPA 70/NEC and UL 94.

Experience in Instrument Sizing and selection of latest Software’s like:

1. Plant Engineering Software-Intergraph (Smart plant)-IN tools.

2. InstruCalc 9.0 - Instrument Engineering Calculations for Control Valves, Flow Elements, Relief Devices,

3.Conval for Control Valve sizing, Safety Valve, Orifice Sizing

4.Flowel 4 for sizing orifice plates, nozzles and venturis.

5.Vendor Instrumentation Software-Control Valve and Safety Valve Sizing.

6.Computerised Maintenance Management System (CMMS)

DETAILS OF PROFESSIONAL EXPERIENCE:

Petrofac Engineering Services India Pvt. Ltd. Gurgaon-122002, Haryana.

Lead Engineer/ Consultant-Instrumentation and Control

January 14, 2019 to November 15, 2019.

Company Profile: EPCC-Engineering, Procurement, Construction & commissioning (Turnkey)

Job Profile:

Lead Instrumentation: Thailand Oil Refinery Expansion (Greenfield comprising HMU3/4 & PSA 4/5. Packages-ETP&SRU Granulation and Handling, Utilities (Steam Air, and Pitch Storage) and QMI (Analyzers)

Demonstrate and Lead the activities of the Instrument group ensuring close interface between Client/PMT/QMS/Inter-discipline. Keep the Engineering Manager apprised of activities and concerns.

Maintains adequate manpower and schedules and assigns manpower in the discipline.

Provide guidance and leadership in technical matters and give discipline approval to project deliverables.

Prepares discipline budget and forecast.

Liaise with inter-discipline and Project Department/QMS in assessment, development and production of department standards, guidelines, methods and techniques to enable documents/ deliverables expediency.

Provides guidance and leadership in all technical matters and give discipline approval to various project deliverables.

Review and approve Vendor Engineering Documents/Deliverables.

Incorporate the International and company standards TOSS/TOSD and Shell DEP-Version 38 to meet the project specific requirement.

Project: (EPCC-Turnkey-Greenfield): Thai Oil production Refinery-Thailand

UPCEM Engineering & Consulting Pvt. Ltd

Discipline-HOD (Senior Consultant)-Instrumentation & Control system

Feb. 20, 2017 Feb. 28, 2018

Company Profile:

1.Basic Process Engineering in both Brownfield & Greenfield. Strong capabilities in conceptual design and process development. Basic process engineering study. Provide feasibility study, Front End Engineering Design Study (FEED), cost estimation & planning.

2.Pre-commissioning & Commissioning: Established a strong track record in pre-commissioning, commissioning and start-up activities,

3.Environmental Services: Capable of giving suggestion & support in HSE issues occur during design, construction & commissioning phase. Involves in participation of HAZOP studies, QRA studies & Pre-startup safety analysis. Capable for HSE compliance audit, hazardous waste audit & management.

Job Profile:

1.To Verify ICS (PCS, ESD, F&G) subject to latest revision of P&ID, Instrument Index, Interconnection diagrams, Instrument Loop Diagrams, F&G Layout, Cause & Effect diagram to meet the project requirement.

2.Freezing of Final IO List, Interfaces with packages and Logic with Honeywell and provide clarification for readiness of ICS for pre-commissioning & commissioning.

3.To Liaise with ICS vendor (Honeywell)

4.Monitoring Electrical & ICSS work from Upcem office by interaction with site engineers.

5.Review and approve Vendor (Honeywell) Engineering documents/deliverables.

Project: (EPC): Sagar Samrat Conversion Project - Topsides Engineering, Client: ONGC, Project NO. 4301 (MOPU)

Dodsal Engineering pte LLC, Dubai, UAE,

General Manager (HOD)-Instrumentation & Control and Telecommunication

Nov. 12, 2013 to 18 May 2015.

Company Profile:

Dodsal Dubai, UAE: Engineering, Procurement, Construction & Commissioning (EPCC) has set up to design, engineer and build Upstream Pipeline, Gathering stations & EWTIP.

Job Profile

To supervise the activities of the Instrument and Telecommunication Group ensuring close interface between Client/PMT/QMS/Inter-discipline. Keep the Engineering Manager apprise of activities and concerns.

Maintains and approves the discipline project engineering man-hours, in consultation with Engineering Manager.

Assists Engineering Manager in preparing estimates for Bid-proposals and job scope changes for the Bid proposal related man-hours.

Assists in the planning and recruitment of departmental manpower.

Maintains adequate manpower and schedules and assigns manpower to various projects.

Provides guidance and leadership in technical matters and gives discipline approval to various project deliverables.

Prepares discipline budget and forecast. Liaises with the inter-discipline and project department/QMS in assessment, development and production of department standards, guidelines, methods and techniques to enable documents and engineering Deliverables.

ts/ deliverables expediency.

Provides guidance and leadership in all technical matters and give discipline approval to various project deliverables.

Responsible to exhibit the expedition of the Pre-Bids.

Project: (EPC)

7.Gas Compression and reinjection GR5-Sonatrack, Algeria

8.Gas Compression and Distribution ZCINA-Sonatrack, Algeria

9.KOC-GC-31, 31 offsite-Kuwait

10.KOC-GC-EWTIP-Kuwait

11.Master Gas Station Pipeline KSA

12.ADCO NEB @Seoul-Korea

13.KOC-FEED Pipeline-Kuwait

CH2MHILL VECO ENGINEERING, ABUDHABI, UAE

SENIOR INSTRUMENTATION & CONTROL ENGINEER

June 12, 2011 to Nov, 2013

Company Profile:

CH2MHILL VECO ENGINEERING: Engineering, Procurement, Construction & Commissioning (EPCC) and Project Management Consultant Services provider Company based in Abu Dhabi, UAE has set up to design, engineer and build Upstream, Oil/Gas Exploration (GOSP) & Downstream Hydrocarbons Processing Facilities.

ADCO: Petroleum Operating Company, Developing Gas and Oil Separation (GOSP), Upstream & Downstream facilities for the Onshore Oilfield in Abu Dhabi, UAE.

Job Profile:

Responsible to manage and lead a team of engineers in carrying work for onshore oilfield development projects for conceptual Phase. Review and design check as per SHELL Standard/ADCO Developed Standards, HSE Fire and Safety Management Policy for Field & control Room Instruments and systems. Review of engineering drawings and other documents to ensure compliance as per contract requirements. Coordination with contractor design team members other disciplines to resolve design issues. Mentor emerging professional engineers in all the phases of Discipline Design and Detail engineering.

Projects Profile:

Conceptual Study on implementation of corporate fire protection Gap analysis; (JD/BAB & BUHASA). Conceptual study and implementation of fire protection gap from each field area in coordination with the local consultant. The gaps were analyzed for mitigating the existing fire and safety systems by considering the addition of Fire and Gas detectors and sensors in the field to cover the maximum area (Range of Sensing Area) and developing the I/O’s mapping in existing fire detection system in (JD/BAB & BUHASA).

Conceptual study and EPC for Jabel Dhana Miscellaneous –Review and approve the Mass Balance and Acoustic LDS Package. The new I/O’s of LDS and Block valve Stations are integrated to the existing DCS-ABB at BAB and New DCS-Yokogawa 3000R at ASAB. The Two Block Valve Stations were hooked up with the New RTU’s. The communication was established from New LDS and RTU’s to DCS through Existing fiber Optics. The interface between DCS and Leak detection work station at BAB and DCS is provided through existing OPC system. Reviewed and approved the detail engineering deliverable for Bid produced by consultant.

TECHNIP FRANCE ABU DHABI, UAE

PRINCIPAL INSTRUMENTATION ENGINEER

December 02, 2009 to April 28, 2011

Company Profile:

Technip: Engineering, Procurement, Construction & Commissioning (EPCC) Company based in Abu Dhabi, UAE has set up to design, engineer and build Upstream, Oil/Gas Exploration (GOSP) & Downstream Hydrocarbon Processing Facilities.

Job Profile:

Responsible to manage and lead a team of engineers and designers in carrying out detailed engineering work for large sized projects assuming entire responsibility for conceptual and detailed design and providing necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules. Review and design check as per Company standards for Field & control Room Instruments. Review of engineering drawings and other documents to ensure compliance as per contract requirements. Coordination with design team members other disciplines to resolve design issues. Site Management, Equipment lay out in C/Room. Mentor emerging professional engineers in all the phases of Discipline Design and Detail Engineering.

Projects Profile:

EPCC: Ras Laffan-Qatar Common Cooling Seawater System Interconnection: Actively participated in HAZOP. Review and approve Detailed Engineering as per Company standards for Field & control Room Instruments:- Centrifugal Pump Control Logic System, Vibration Monitoring System VMS BN3500, Non-Intrusive Clamp on Ultrasonic Flowmeter Size 48” (Siemens), SMART (HART) and Foundation Fieldbus Instruments control Valves integrated with existing DCS Honeywell TDC 3000. The pump control logic system, Emergency Shutdown Valves and Detrronic FGS System is integrated with the existing ESD Invensys Triconex V10.0

FEED: CO2 EOR at Hawaiyah (LNG) Natural Gas liquefied recovery plant. Responsible lead the team of engineers Designers and draftsmen for FEED for CO2 EOR. The FEED is carried in accordance with the DBSP and Saudi Aramco Engineering Standards. Review and Approve design checks as per Saudi Aramco standards for Field & control Room Instruments: - Foundation Fieldbus Instruments. Prepared FEED package including site survey comprising Instrument index, I/O List and I/O Summary, Cable Sizing, Cable Layout, Specification of FF Instruments, sizing of control valves, Relief valves, Shutdown valves, Functional Specification (FSD) of DCS (Yokogawa CS 3000R3), ESD (Invensys Triconex V10.0), VMS (BN3500) for Centrifugal Pump, Gas Compressors and Fin-Fan Cooler, Compressor Performance Controller (CCC) including Load Shedding, Anti-surge Controller, Leak Detection system (LDS) Wave Alert 8.0 for CO2 Pipeline, OTS (Operator Training Server-Yokogawa), GE Monitor FGS and Public Address/General alarm (PA/GA) Tyco System. The FEED Instrumentation and Control System was designed to integrate and interface with the existing DCS Yokogawa CS 3000R3 and ESD Invensys Triconex V10.0. Prepare Close-out Report.

Yemen LNG Upstream EPC Phase-II SIL verification: Responsible for SIL Verification. The SIL verification was done in accordance with IEC 61508 Part1-7 and IEC 61511 Part 1-3. The achieved SIL 1, 2 or 3 was classified for all SIF’s in accordance as per YLNG Upstream Safety Concept. The Target SIL for all SIF’s including initiator, logic solver and final control element in the loops were verified and achieved by performing calculation and implementing risk mitigation (if required).

JACOB ZATE AL-KHOBER, SAUDI ARABIA

DEPARTMENT MANAGER (HOD)-INSTRUMENTATION

October 01, 2006 to September 30, 2009

Company Profile:

JACOB ZATE: Engineering, Procurement Commissioning & Inspection (EPCI) Company based in Al-Khobar, Saudi Arabia has set up to design, engineer and build Upstream & Downstream Hydrocarbon Processing Facilities, GOSP and refinery.

SAUDI ARAMCO: The National Oil Company of Saudi Arabia, and is one of the world's largest producers of petroleum products.

Job Profile:

Discipline management technically and administratively in all the phases of engineering from FEED & Detail Engineering for Upstream and Downstream of Pipeline Projects, Oil Wells, Water Injection Wells and GOSP for Saudi Aramco Mentor emerging professional engineers in all the phases of Discipline Design and Detail Engineering.

Projects Profile:

Bid Proposal: Shy-1 Loop 2 NGL Flow line and Gas Compressors: Evaluated FEED for Discipline input in coordination with other disciplines and Prepared BID proposal package for Detail engineering.

EPCC; Khurais Downstream Hydrocarbon Flow line: Responsible to lead the team of Engineers, Designers and Draftsmen for Detailed Engineering, Erection and Commissioning as per Saudi Aramco standard for Field & control Room Instruments: - SMART (HART) and Foundation Fieldbus Instruments, Flow Metering Station using KRONHE Intrusive Ultrasonic Flowmeter, Wave Alert Leak Detection System 8.0 interfaced between existing DCS Emerson Delta V10.0 and New Wave Alert Server through OPC. Provided HIPP, Detronic FGS System interfaced with existing SIS Honeywell FSC.

EPCC: Flow line extension @ Jumayah Gas plant: Responsible to lead the team of Engineers, Designers and Draftsmen for Detailed Engineering, Erection and Commissioning as per Saudi Aramco standard for Field & control Room Instruments:-SMART (HART) and Foundation Fieldbus Instruments, Flow Metering Station using GE Panametrics Clamp on (Non Intrusive) Ultrasonic Gas Flowmeter, Wave Alert Leak Detection System 8.0 interfaced between DCS Yokogawa CS 3000R3 and New Wave Alert Server through OPC. Provided HIPP, GE Monitors FGS System interfaced with existing ESD Invensys Triconex V10.0

EPCC: Shy-1 Loop 1 NGL Flowline and Gas Compressors: Review and design and drawings check, erection and commissioning as per Saudi Aramco standards for Field & control Room Instruments: - SMART (HART) and Foundation Fieldbus Instruments, Flow Metering Station using GE Panametrics Clamp on (Non Intrusive) Ultrasonic Gas Flowmeter, Wave Alert Leak Detection System 8.0 interfaced between Emerson Delta V10.0 and New Wave Alert Server through OPC. Provided HIPP, GE Monitors FGS System interfaced with existing SIS Honeywell FSC.

EPCC: Offshore Saffania Gas Compressors (04 Units). Review and design and drawings check, erection and commissioning as per Saudi Aramco standards for Field & control Room Instruments: - SMART (HART) and Foundation Fieldbus Instruments. Added I/O Modules integrated with existing Control system in PIB. Integration and interface of CCC Compressor Performance Control System, Load Shedding, Anti-surge Controller, Mark IV Speed Controller for GE GTC, VMS BN3500 with Sys-1 for CMS, GE Monitoring FGS, Control Valves, Safety Valves, Emergency Shutdown Valves and Package Interfaces with existing DCS Yokogawa CS 3000R3 and ESD Invensys Triconex V10.0 through existing OPC.

PETROFAC INTERNATIONAL, SHARJA, UAE

SENIOR INSTRUMENTATION ENGINEER

June 28, 2005 to June 12, 2006

Company Profile:

Petrofac: Engineering, Procurement, Construction & Commissioning (EPCC) Company based in Sharjah, UAE has set up to design, engineer and build Upstream & Downstream Hydrocarbon Processing Facilities.

GNPOC is a Petroleum Operating Company, a Consortium Developing Gas / Oil Separation (GOSP) Upstream & Downstream facilities for the Muglad Oilfield in Sudan.

Job Profile:

Project Management Consultant to Discipline Engineering for Muglad Upstream and Downstream Existing and New Oil/Gas Field Processing Facilities (FPF). Review design and drawings checks, co-ordinate for design review, HAZOP meeting and Factory acceptance testing (FAT) at Loop automation in Dubai. Mentor emerging professional engineers in all the phases of Discipline Design and Detail Engineering.

Project Profile:

Gas/Oil Separation facility (GOSP) @ Neem: PMC services for Greenfield EPCC of GOSP, for Greater Nile Petroleum Operating Oil Company (GNPOC) Khartoum at Sudan. Actively participated in HAZOP. Review and approve documents and drawings as per Company and international standards for Field & control Room Instruments: - ABB DCS V 8.0, HIMA Q-4 ESD & HIMA FGS System & SMART (HART) and Foundation Fieldbus Pressure, flow, level, temperature Instruments, Guided Wave Radar Level Gauges,

CCC Compressor Performance Control system, Anti-surge Controller, VMS 3500 with Sys-1 for CMS, Control Valves, Safety Valves, Emergency Shutdown Valves and Package Interfaces including OPC.

APC INTERNATIONAL SHARJA, UAE

SENIOR CONSULTANT-INSTRUMENTATION & CONTROL SYSTEM

July 04, 2004 to June 03, 2005

Company Profile:

APC International is a Contracting Human Resource Consultancy based in Sharjah UAE.

BIPC-IRAN: A petrochemical Processing Complex is a company within the Iran National Petrochemical Group, producing Various Petrochemicals.

Job Profile:

Discipline Engineering Project management Consultant (PMC) to BIPC Centralized Utilities, Power Generation GTG (Gas Turbine Generator), Steam Generation, Nitrogen Generation, Air Compressors & Air Driers & D.M. Water, R.O. Plant. Review and approve designs and drawings in accordance to ensure compliance with basic design and project specification Demonstrate as Discipline representative at staff meetings, design reviews and other meetings involving client, contractor or other third party. Mentor emerging professional engineers in all the phases of Discipline Design and Detail Engineering.

Project Profile:

ABNIROO Centralized Utilities & 64 MW Power Plant: Revamp and migration of pneumatic, electronic instrumentation and Foxboro Modular Spec 200 system to SMART (HART) and Foundation Fieldbus Instrumentation and advance process control system for Power Generation GTG (Gas Turbine Generator), Steam Generation, Nitrogen Generation, Air Compressors & Air Driers & D.M. Water, R.O. Plant.

Review design and drawings, checking as per Iranian Petrochemical Standards (IPS) standards and International Standards for Field & control Room Instruments:-

Emerson Ovation Control System and Mark VI Speed Control for 64 MW Power Plant GTG & SMART (HART) and Foundation Fieldbus Instruments for pressure, ABB Freelance 8.0F SCADA and CCC compressor performance control system, Anti-surge Controller, VMS 3500 with Sys-1, DCS Emerson Delta V10.0, Honeywell FSC and TYCO FGS.

AMCDE AL-KHOBER, SAUDI ARABIA

PROJECT ENGINEER

May 08, 2000 to August 15, 2003

Company Profile:

AMCDE is an EPC Company undertaking business of GES in Saudi Arabia.

SAUDI ARAMCO: The National Oil Company of Saudi Arabia, and is one of the world's largest producers of petroleum products.

Job Profile:

Responsible for execution of capital projects according to the scope, schedule and budget.

Responsible for project development: preliminary engineering to detail designs to construction and the final and safe turnover to proponent.

Responsibility include to lead a design team of instrument and process control system engineers during the design and detail engineering development and procurement phases for all field instrumentation / process automation / safety instrumented systems.

Responsible for Discipline Design and Detail engineering for Upstream & Downstream Oil/Gas exploration and Separation facilities, Onshore and Offshore, Hydrocarbon Processing Refinery to Saudi Aramco and SABIC Group of Industries. Establish designing process control modifications to existing plants in conformance with SAUDI ARAMCO Standard SAES, SAMMS, SAEP and industry standards and

Contact this candidate