JEFF L. GROSSMAN

SUMMARY

Seasoned Professional with 25 plus years extensive experience since 1986 combined in Direct and Contract /consulting in the Aerospace, Aviation, Automotive industries.

Areas of expertise in positions of Program Management, Quality Management, Quality Engineering, Supplier Quality Management, Manufacturing Engineering

Specialize in new launch / prototype / r and d programs as well as design review and approval, planning and inspection planning. Sheet metal fabrications, Machining, Composites, RTM, Injection molding, tooling, wiring harness fabrication, Electronics, Electro-Mechanical sub- assemblies, final assembly. Start up new programs / R&D and source control suppliers and supplier review. Perform and or generate AS9102 first articles and approvals. ISO: 9001:2008, AS9100, ISO-13485:2003 QMS systems and implementation. Corporation / Manufacturing / Management review consultant.

EMPLOYMENT

Sikorsky Aircraft Corporation West Palm Beach, Fl 33610 04/2018 to 09/2021

Design Flight Center

Sr. Flight Test Quality Engineering Lead

Contracted for MRB non-conformance oversight and tracking Board review and processing

Corrective Action Board,

Tool calibration activity oversight,

Cost of Quality

Quest Global: for Pratt Whitney (Contract) 02/13 to 3/18

Supplier Quality Engineer

Support for the south east region on behalf of Pratt Whitney jet engine Mfg. Corporation supply chain, (CQAR / SQAR) Quality representative to source, monitor and approve suppliers, Perform AS9102 validation and approvals, Process Audits, Capability approval, Process validation and QMS Systems to AS9100

GKN Aerospace division, Tallassee Alabama (Perm)

Deputy Director of Quality

Lockheed Martin, Sikorsky, Honda Jet, Programs 11/04 to 12/12

Direct contact of support level for all customers for programs and attend IPT meetings. Interface with FAA offices as required M.I.D.O. / A.C.O. for TC programs

Provide direction and guidance to QA staff which includes Quality program managers and Sr. Level Quality Engineering support, Supplier Quality and trainer for quality staff under my organization.

Direct all MRB activity and MRB board items for customer submittal and corrective actions associated with.

Implement customer requirements and internal requirements with in guide lines of ISO-9000:2000 and AS9100, NADCAP.

Review and implement Process planning and Quality inspection planning methods as well as all procedures feeding throughout contract requirements.

Set up and direct all implementation activity for Oregon Production Management system for Self release authorization.

Guide and lead New Program start up projects.

Delegate authority representative for Honda Jet program for all sourcing activity for Type Certification activity.

Supplier conformity and supplier management.

R&D programs from type design I.P.T. engineering for several programs such as Composite Tail Cone assembly for Black Hawk, H-92 sliding door redesign from I.P.T. through STC approval including all test requirements / cycles for SAC/ Keystone as well as Canadian version MHP. All supplier activity from approvals to FAA certification including all special processes.

ATK Space Systems, Iuka Mississippi (Contract) 7/03- 11/04

Lead Process engineer /MRB Engineer

Delta 2,3,4 Layup Composite Casings for payload Rockets

Cause and corrective action plans, preventive action plans

MRB rework and repair planning and procedures through Gov’t approval (NASA)

Global Hawk R&D start up project in conjunction with Aurora Flight Sciences for wing assemblies and V-Tail assemblies IPT engineering and Liaison

Liaison engineering with between prime and sub-tier for produce ability

GKN Westland Aerospace, Alabama / Missouri 04-01/- 7/03

Program Manager, IPT Lead Engineer

Eclipse 500 detail components New Proto type FAR 23 Type Certification Program, Pratt Whitney engine details and Sikorsky helicopter components GE/Gen-x Fan cases and stator assembly.

Manufacturing Engineering, Quality engineering, re-design coordination efforts and certification process (IPT )

First article, Non-conformance system and activities.

Customer Support and design contact activity

Procurement activity, supplier selection and costing supply chain management

Program budget and work force scheduling and supervision aspects

FAA Activity and Customer contact

Lean manufacturing, 6S. CAP plans.

Airbus MRB engineer for A330,340 and A380 liaison to BAE cause and corrective actions and Non-conformance activities

Sino Swearingen Aircraft Corp., San Antonio, TX, TAC Nationwide staffing 3/00 -4/01

Quality Engineer / Conformity Engineer . (Contract)

Planning review lead and Liaison, FAR 23 Type Certification Program.

Aircraft assembly from detail and sub-assemblies and aircraft installations

oFAA conformity activities and preparation

oDAR Liaison and FAA Non-conformance activities

oPlanning review and red lining activities

oDrawing review

oTooling review and calibration, Flight test calibration.

LOCKHEED-MARTIN AEROSTRUCTURES, Pinellas Park, FL, 1/98 - 4/99

(Contracted) Quality Engineer / Manufacturing Engineering though Hi-Tek Professionals

F-16, C-130, F-18, F-22 detail fabrication from forming, machining, routers, punch press operations, heat treating.

Planning review and inspection operation implementation

First Article inspection and verification and AMMC support

Manufacturing Liaison support and MRB submittals.

Supplier Audits to QCS-001 Requirements.

NDT, NDI requirements, Flu pen, conductivity.

BALIMOY MANUFACTURING, Tampa, FL (Contract) Tech-Staff 1996 - 1997

Quality Manager/Quality Chief

ISO/QS9000 Implementation

PPAPS / FEMAS for machined items as to truck housings, pistons and transmission details for Tier 1 automotive supplier and military ammunitions.

Contract review and implementation, planning, first article, inspection support and process inspection and set up, gage remove and replace

NORRIS PRECISION MANUFACTURING, Clearwater, FL (Direct) 4/94 - 4/96

Quality Manager/Q.E (Machined Aerospace and Automotive products)

Contract Review, PMR, and Non-conformance activity. Corrective Action review and implementation

Inspection requirement planning, in-process inspections, audits, support floor inspection activities.

First article inspection, Final sell off

Customer contact of Martin Marietta, Textron fuel systems, Allied Signal and Delphi

NDT requirements

CERTIFICATIONS-AND-STRONG FAMILARIZATION OF ASSOCIATED SPECIFICATIONS.

Hand Solder Mil-S 45743E amend #2 Mil-S454 reg.5 MIL- 2000A

Harness and Cable D68399608-Mis-22129

HaZcom 1910. 1200 level 3

Internal Auditor ISO 9000-9004/ QS9000/AS9100

ASQ/CQE, CQM, CQA #01140962

IPC-600 and IPC-610. COMMERCIAL STDS.

QCS-320-QCS-001 Lockheed Martin SURVEY/AUDITS QUALITY SYSTEMS

MIL-I-45208A QUALITY SYSTEMS REQ.

NDTS 1500-, 1501&1502 NON-DESTRUCTIVE TESTING

ISO 9000: 2008, ISO 13484:2003, AS9100 Quality systems

MIL-H-6088G HEAT TREATING OF METALS (all associated specs)

Mil-Q-9858A QUALITY SYSTEMS

MIL-STD-105E SAMPLING PLANS (production)

MIL-STD-45662 METROLOGY&CALIBRATION

MIL-I-1535 MRB

TQM

Lean Manufacturing Practices, 6s, six sigma, continuous improvements.

EDUCATION:

Peter Land Certification of Program Management

Business Management. 1986-1987

(Course provided by Valencia Community College Orlando, Florida on site CES course @ Martin Marietta Electronics and Missile division. Orlando, Florida)

Cambridge Buxton University,

BSME 1994 graduate

Hobbies,

Pro bowling, Building and restoring classic automobiles and Hot Rods,

Drag Racing. (NHRA)

Support and coach with Special Olympics in bowling.

Training German Shepard’s.

Contact this candidate