Cnc Machinist Milling
Resume:
Jeff Henson
CNC Milling machinist
Calvert, AL **513
****************@***********.***
Authorized to work in the US for any employer
Work Experience
CNC Plasma Operator
TKO Contractors - Semmes, AL
March 2020 to Present
Program, operate and maintain the Hypertherm plate pro x/d plasma machine. Cnc Milling machinist
Spirit AeroSystems - San Antonio, TX
December 2019 to Present
3,4,and 5 axis Okuma Milling machines.
Specializing in Titanium and Aluminum
2 or 3 setups daily
Milling machinist
Nordam Aerospace - Tulsa, OK
September 2019 to December 2019
5 axis Router
2-4 setups daily
CNC Milling machinist
Loc Performance - Plymouth, MI
June 2019 to September 2019
Okuma V mill; Mazak 6800 & 8800; numerous others.
2-4 setups daily
CNC Machinist
Metal Shark Ship Building - Mobile, AL
April 2019 to June 2019
• CNC plasma;
• CNC milling machinist
CNC Machinist
BAE systems - Mobile, AL
December 2018 to March 2019
• CNC plasma; laser
• CNC H mill Mori Seiki
CNC Machinist
Hypro Machining - Cedar Falls, IA
August 2017 to November 2018
Mazak 6800 H mill
Crane Operator
PPM Power Plant Sutherland, Neb
May 2017 to July 2017
OVR 200ton crane operator
H and V mill operator
Hypro Machining
August 2016 to April 2017
Mori Seiki, Mazak 6800 & 8800, Okuma Mill
CNC Machinist
SI Technologies, Omaha, Neb
April 2016 to July 2016
CNC Triumph Laser, CNC H mill Mazak 6800
CNC Machinist
BAE systems - Mobile, AL
October 2015 to June 2016
CNC plasma and CNC H-mill, Mori Seiki
CNC Crane Operator
ATI Steel - Pittsburgh, PA
June 2015 to March 2016
• OVR Crane 300ton cab/remote operator/ trainer
• Overhead Crane Operator 182 ton Main pulpit operator Finishing mill Operator CNC Machinist
HyPro Inc. - Platteville, WI
February 2015 to May 2015
CNC Operator
• (laser, oxy and plasma)
• Milling machinist(Mori Seiki)
• Melt shop Crane Operator/Trainer
OVR Crane trainer
Outokumpu Stainless
November 2012 to September 2014
Operated and trained operators on an overhead power cab controlled Kone manufactured 120ton crane. QA Inspection Specialist
ThyssenKrupp Steel
April 2011 to November 2012
• Inspected HDL strip material quality in real time and dispositioned according to QA and customer specifications.
• Authored numerous SOP/JSA's pertaining to QA strip analysis within the Hot Dip Galvanized Line Dept.
• Trained all department line personnel on Kone 75t overhead cranes and rigging.
• Partook in all safety training in accordance with OSHA and company policies. Helper
Electrical Contractors
July 2009 to April 2011
Assisted the journeyman electrician in wire termination, motor installation, cable tray installation, and conduit Installation. Certified on forklifts, JLG, scissor lifts, aerial lifts and overhead cranes. Plasma Operator/Trainer
Atlantic Marine
August 2008 to July 2009
• Trained operators on the Hypertherm series plasma cutters with gas head modifications compatible with Cleveland touch screen motion controlled interface system capabilities. Real time editing of such CAD programs
• For MOD accuracy and distribution. Trained personnel on overhead cord controlled 55t crane. Coordinator/Pulpit
Ipsco/SSAB Steel
March 1999 to August 2008
Op
• Reclaim Coordinator: Responsible for up-grading or down-grading all suspect products in compliance with QA. Re-assigned hold material to customer orders via Level 4. Maintained and distributed daily shift report to all dept. managers.
• Shipping/Finishing shift Coordinator: Start up team original member.
• Authored and co-authored numerous instruction manuals, safety procedures and JSA/SOP's pertaining to the shipping department.
• Documentation and presentation of shift/department safety classes.
• Partook in several leadership training seminars during start up.
• Evaluation of all shift personnel. Coordinated all shift activities to include but not limited to the following:
• Assignment of material orders via Level 3 and 4 through Level 3 ICS, creating and assignment of customer load orders to shift personnel via the ICS Level 3 system, changing/modifying orders via level 4 in conjunction with the shear operator and mill scheduler.
• Planning or altering the mill schedule in conjunction with the Rolling mill coordinator, planning all loads within the mill lineup in real time via level 3 and 4.
• Maintaining a shift report in real time and distribution of said report to all related department managers. Partaking in all shift mill schedule meetings. Interviewing of potential department employees.
• Part of a 4 person team to create the " crane version" level 3 Prism Systems interface actual application touch screen. Authored the company wide M.O.D. crane portion advancement test. Word/excel trained.
• Heat treat pulpit operator team leader: Start up team member. Authored numerous JSA/SOP's focusing on the operation of the Normalizing, Automatizing and Tempering furnaces. As well as, Quenching process, automated on-line cranes and operating pulpit responsibilities concerning Level 2,3 and 4. Trained all department personnel on the 55t overhead cranes, loading/unloading procedures, usage of company wide ICS software with Prism system handhelds. Pulpit responsibilities: Feeding of all 3 lines via 2 automated jib cranes, checking all incoming loads for strata accuracy via the ICS level 3 interface, setting up and monitoring the
Plasma/Team Leader/QA
Metals USA
February 1992 to March 1999
• Operator: Operated ESAB CAD models 95,350 and 360 plasma/gas burny machines with 12" gas capabilities and 2.25 plasma capabilities.
• Edited all necessary CAD programs prior to cutting in compliance with customer orders.
• Operated Hypertherm series 4001-4010 models with plasma/gas capabilities with Cleveland touch screen motion control interface systems.
• Also operated press brake and paint blaster. Trained on 50t overhead remote crane.
• *Bay 3 and 4 team leader. Responsible for unloading structural material railcars, band saw cutting and inventory control and auditing.
• Interim Warehouse manager Kenner La: Initiated zero tolerance drug programs.
• Reduced overtime rate by83% while improving on time deliveries by 65%. Re-designed warehouse layout and processing steps. Trained a permanent warehouse manager. Education
Associate
Skills
• Cnc Machine
• CNC
• Cnc Mill
• Aerospace
• Axis
• Mazak
• Set up experience 2yrs (2 years)
• CNC Laser Cutting
• Crane
• CNC Programming
• Plasma Cutting
• Calipers
• Micrometer
Certifications and Licenses
Crane Certification
Contact this candidate