Warehouse Worker Newport News
Resume:
Andre Johnson
Looking for employment with a Corporation or Company with the ability to advance in that environment and grow with the Company.
Kinston, NC 28501
******************@***********.***
Willing to relocate to: N.C., VA - -
Authorized to work in the US for any employer
Work Experience
Warehouse Worker
William Barnet & Son - Kinston, NC
July 2023 to Present
I work as a creeler in the warehouse. I hang tubes of string on pegs to be pulled into a machine to be cut. There are different types of strings we use and cut in different sizes for mattresses and pillows. I also trained and operated different cut machines in the warehouse at Barnet. Assembly Line Worker
Mega Force Staffing/ Electrolux - Kinston, NC
October 2022 to December 2022
Working on the assembly line for Electrolux building dishwashers. Install screws, wires, and doors. 1st Class Insulator
Unitherm - Hampton, VA
April 2022 to September 2022
1st class insulator to apply rubber and fiberglass insulation to steam pipes and chill water lines. We also used duct wrap to cover the ducts in the ceiling as well as mechanical rooms. Mechanical Insulator
C.A. Jones, Inc. - Newport News, VA
June 2021 to April 2022
I apply insulation on different ship, subs, pumps, bulkheads, pipes, A.C. Units, and engine rooms. Using different types of marine insulation materials. Also performed painting duties when I ran out of insulation work. Which involved prepping, cleaning, sanding, and painting the final product. Insulator
Trade Team - Chesapeake, VA
July 2020 to February 2021
Worked through the VMS Program for BAE Systems where I applied different types of insulation on Bulkheads, pipes, pumps, strainers, chill water lines to different U.S. Military Aircraft Carriers. First Class Insulator
C.A Jones - Newport News, VA
September 2016 to July 2020
Apply, remove, and repair insulation on ducts, pipes, bulkheads, streamlines, pumps and strainers. Insulator
Mills Marine LLC - Suffolk, VA
June 2014 to December 2015
Apply,remove, and repair insulation on industrial equipment, pipes, ductwork, or other mechanical systems aboard U.S. Military Aircraft Carriers.
Painter, Assembly, concrete finisher, forklift
Tidewater Staffing/ HRC (sub contractor) - Newport News, VA June 2012 to June 2014
Painter-
I was a Painter at HRC where I painted, cleaned, sand, grind, and wrapped areas with plastic for safety and spills using different types of paints, primers, and varnish for walls, ceilings, floors, wooden panels and cabinets on U.S Military Aircraft Carriers, buildings and other structures on the Newport News Shipyard. Assembly/Sub Assembly/Install Structures
I also did Assembly work putting together different types of machines, computer desk, wiring and components. I'm also experienced with using sheet metal. We installed new restrooms in Newport News Shipyard buildings and assembling new stalls, doors, and sinks. Using Drills, Fasteners, and Sealers. Concrete Finisher
I became a concrete apprentice 7 months in the company learning from someone with 49yrs experience. I became a finisher with hard work put in I also build forms for concrete pours once I got the hang of things great experience.
Forklift.
Operated a Forklift to load and unload materials from trucks, also used a forklift to move things around the compound onto sections keeping things neat and organized. Painter
Tidewater Staffing - Newport News, VA
September 2010 to October 2012
Painter -
I was a painter as well as lead person in the paint department. My duties were to paint, clean and prep all areas designated for painting on U.S Military Aircraft Carriers for rust, lead paint, peeling paint, as well as dirt, dust particles, and metal shavings.
Insulator
Waco Inc. - Newport News, VA
January 2007 to September 2010
Prepare surfaces for insulation application by brushing or spreading 30/35 glue adhesive, epoxy, 520 rubber adhesive, or asphalt mastic.
Measure and cut marine insulation to fit bulkheads, pipes, pumps, ducts, and also buildings and U.S Military Aircraft Carriers
Painter/ Insulator
Tidewater Staffing - Newport News, VA
January 2006 to December 2007
Subcontractor for Stanley Marine I also was a leadman in the paint department responsible for prepping, cleaning, sanding and painting, areas aboard U.S military aircraft carriers in Newport News Shipyard. My foreman also had me doing marine insulation and other Insulation duties, due to a employee shortage. Forklift Operator/Material Handler
M. Price Distributing Co. - Hampton, VA
May 2004 to July 2006
Responsibilities were to unload trucks after deliveries using forklift and pallet jacks. I also work as a material handler in the warehouse rebuilding pallets to be reloaded back on the trucks. I was building pallets at 250 cases per hour. After the orders were built they were reloaded back on the trucks to be delivered.
Assembly Technician
RMS Technology - Newport News, VA
October 2002 to May 2004
My job was to build pop up targets and target arms for the U.S Military (Army) working for a defense contractor. Responsibilities were to install wires, switches, and small motors inside the targets. Using Drills, Insert Fasteners, Counter Sink, Assembly/Sub assembly, Installing Structures. Checking behind our work we sent the targets to Q/A to be tested. We also worked in a anti-static room adding chips and other housing parts on motherboards used for the operating system for controlling the targets. Education
GED in General Studies
Washington, DC
May 1995 to June 1995
Skills
• Assembly (5 years)
• Construction (5 years)
• Painting (10+ years)
• Concrete finishing (2 years)
• Hand tools (10+ years)
• Basic math (10+ years)
• Concrete Forming (2 years)
• Fabrication
• Packaging (5 years)
• Caulking (6 years)
• Driving (4 years)
• Warehouse experience (5 years)
• Insulation (10+ years)
• Power tools (6 years)
• Remodeling (4 years)
• Drywall
• Sub Assembly (6 years)
• Countersink
• install Structures (3 years)
• Varnish (3 years)
• Carpentry
• Materials Handling (5 years)
• Inserting Fasteners (6 years)
• Door Hanging
• Assembly
• Forklift
• Load & unload
• Driving
• Carpentry
• Construction
• Customer service
• Delivery driver experience
• Industrial equipment
• Manufacturing
Certifications and Licenses
OSHA 10
Present
Driver's License
November 2017 to February 2028
Assessments
Construction safety — Proficient
August 2022
Using safe practices while on a construction site
Full results: Proficient
Delivery driver — Proficient
September 2022
Interpreting instructions or signs and solving problems Full results: Proficient
Work style: Reliability — Proficient
August 2022
Tendency to be reliable, dependable, and act with integrity at work Full results: Proficient
Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.
Contact this candidate