Start Up Document Control
Resume:
Valerie Vaughn
Sumter, SC, ****0
Objective Summary: 15+years of work experience in the production Industry. Dedicated to maintaining company policies and standards for producing quality parts. Work Experience:
Inspector/Sorter, at Metal Finishing Services.Sumter,SC July 2011- August 2020
● -All nuts are inspected for imperfections such as no thread, bad cut off.
● -Nuts (different sizes) are loaded into metal racks,racks are sent
● down a processing line in which all nuts are chemically nickeled
● coated inside, then through a rinse cycle.
● -Next nuts are dried in a timed heat cycle,at the end of the cycle
● all nuts are inspected for proper coating,free of peeling or blisters
● Inside the thread.
● -Nuts are wired brushed to remove burrs leaving a smooth surface,
● packed and labeled to identify quantity and nut size. Weld Operator/Packer, at Midwest Stamping. Sumter,SC November 1999 - April 2011
● -All Parts are 100% inspected to be free of rust.lamination. edge damage,
● and surface imperfections, before start up of operation.
● -Weld and check 1st piece of every part type on calibrated gages and thread
● gage,for production approval.
● -Fill out and complete Quality Process Form for every part type, before start up
● of production.run.
● -Inspect labels for accurate information, customer part number and quantity.
● -Always met or exceeded production quotas.
● Packer Shipping Area
● -Verify scale weight at start up of shift.
● -Parts are packed in proper containers, boxes,etc.
● -Verify part number and quantity on labels, before attaching label to container or box.
● -All part numbers are documented on the document control log.
● -All parts are 100% inspected, with zero defects to meet all customer satisfaction.
● -Following procedures, allows for the production of good quality parts
● sent to the customer every time.
Caterpillar Hydraulics Manufacturing Facility
Sept 2021- April 2023
Medium Thread
● At the start of shift check off OPM sheet, make sure gages, scissors and all other
● tools are visible in the work area.
● Floor is free of tripping hazards.
● Check to make sure the head and piston part number match.
● All components are checked for dirt, rust,gouges.
● Head and pistons are demagnetized and washed.
● Follow the standard work procedure for applying all proper seals
● onto the heads and pistons.
● Packing parts
● Follow the packing procedures.
Bolten-Kitting
● All parts materials are gathered for assembling onto cylinders.
● Each operation number has its own materials for completion of a cylinder.
● Head and piston
● Rod built
● Group built
● Test stand
Caterpillar Precision pins Facility
April 2023 - Oct 2023
Packer
Pins are oiled and packed into proper crates or boxes according to customer order and sent to shipping.
Education:
August 1988 - March 1990 Central Carolina Technical College Studied Office Systems Technology.
Personal References:
Frances Smiling
377 Wyoming Dr.
Sumter,SC 29150
Destyni Burgess
336 West Hampton
Sumter,SC 29150
Denise Lemmon
189 Wall Street
Sumter,SC 29150
Contact this candidate